working attenuation

简明释义

工作衰减量

英英释义

例句

1.In telecommunications, maintaining appropriate working attenuation 工作衰减 is crucial for effective data transmission.

在电信中，保持适当的工作衰减 工作衰减 对有效的数据传输至关重要。

2.To enhance audio clarity, we need to minimize the working attenuation 工作衰减 in the sound system.

为了增强音频清晰度，我们需要最小化音响系统中的工作衰减 工作衰减。

3.The technician measured the working attenuation 工作衰减 during the installation process to ensure compliance with industry standards.

技术员在安装过程中测量了工作衰减 工作衰减，以确保符合行业标准。

4.The engineer adjusted the system to achieve optimal working attenuation 工作衰减 for better signal quality.

工程师调整了系统以实现最佳的工作衰减 工作衰减，以改善信号质量。

5.The laboratory tests showed that the working attenuation 工作衰减 of the new fiber optic cable was significantly lower than the previous model.

实验室测试显示，新型光纤电缆的工作衰减 工作衰减 显著低于之前的型号。

作文

In the field of telecommunications, the concept of working attenuation plays a crucial role in ensuring that signals are transmitted effectively over distances without significant loss of quality. Working attenuation refers to the reduction in signal strength as it travels through a medium, which can be caused by various factors such as distance, interference, and the properties of the transmission medium itself. Understanding this phenomenon is essential for engineers and technicians who design and maintain communication systems. When designing a network, engineers must consider the working attenuation of the materials used, such as cables and fibers. For instance, optical fibers have different levels of working attenuation depending on their composition and the wavelengths of light they transmit. The lower the working attenuation, the more efficient the transmission, allowing signals to travel longer distances without needing amplification. This efficiency is particularly important in long-haul telecommunications where maintaining signal integrity is vital.Moreover, working attenuation is not just a theoretical concept; it has practical implications in everyday technology. For example, when you make a phone call or stream a video, the quality of your experience can be directly linked to the working attenuation of the signal being transmitted. If the attenuation is too high, you may experience dropped calls or buffering during video playback. To mitigate the effects of working attenuation, engineers employ various strategies. One common approach is to use repeaters, which amplify the signal at intervals along the transmission path. This helps to counteract the losses incurred due to working attenuation, ensuring that the signal remains strong enough to be received clearly at its destination. Additionally, advancements in technology, such as the development of low-loss materials and enhanced modulation techniques, continue to improve the working attenuation characteristics of communication systems.In conclusion, working attenuation is a fundamental aspect of telecommunications that affects how signals are transmitted and received. A thorough understanding of this concept allows engineers to design more efficient communication networks, ultimately leading to better service for consumers. As technology continues to evolve, the importance of managing working attenuation will only grow, making it a key area of focus for future innovations in the field.

工作衰减在电信领域中起着至关重要的作用，确保信号在距离上传输时有效，而不会显著损失质量。工作衰减指的是信号在通过介质传播时强度的降低，这可能是由距离、干扰以及传输介质本身的特性等各种因素造成的。理解这一现象对于设计和维护通信系统的工程师和技术人员至关重要。在设计网络时，工程师必须考虑所用材料的工作衰减，例如电缆和光纤。例如，光纤的工作衰减取决于其成分和传输的光波长。工作衰减越低，传输效率越高，允许信号在不需要放大的情况下更长距离地传播。这种效率在长途电信中尤为重要，因为保持信号完整性至关重要。此外，工作衰减不仅是一个理论概念；它在日常技术中具有实际意义。例如，当您拨打电话或观看视频时，您的体验质量可以直接与传输信号的工作衰减相关联。如果衰减过高，您可能会经历通话中断或视频播放缓冲。为了减轻工作衰减的影响，工程师采用各种策略。一种常见的方法是使用中继器，在传输路径的间隔处放大信号。这有助于抵消由于工作衰减而产生的损失，确保信号足够强，以便在目的地清晰接收。此外，随着技术的进步，如低损耗材料和增强调制技术的发展，通信系统的工作衰减特性不断改善。总之，工作衰减是电信的一个基本方面，影响信号的传输和接收。对这一概念的透彻理解使工程师能够设计更高效的通信网络，最终为消费者提供更好的服务。随着技术的不断发展，管理工作衰减的重要性只会增加，这将成为未来该领域创新的关键关注点。