two wire system

简明释义

两线制

英英释义

例句

1.The two wire system is ideal for remote monitoring applications where only minimal wiring is needed.

在仅需要最少布线的远程监控应用中，两线制是理想的选择。

2.For temperature sensors, a two wire system can effectively transmit data without requiring additional power lines.

对于温度传感器，两线制可以有效传输数据，而无需额外的电源线。

3.In a basic home alarm system, the sensors are often connected using a two wire system, which simplifies installation.

在基本的家庭报警系统中，传感器通常使用两线制连接，这简化了安装。

4.The two wire system is commonly used in intercom systems, allowing for easy communication between rooms.

在对讲系统中常用两线制，便于房间之间的沟通。

5.Many lighting control systems utilize a two wire system to reduce wiring complexity and costs.

许多照明控制系统利用两线制来减少布线复杂性和成本。

作文

The concept of a two wire system is fundamental in various electrical and communication applications. In essence, a two wire system refers to a configuration where two wires are used to transmit power or signals from one point to another. This system is particularly advantageous due to its simplicity and cost-effectiveness. For instance, in many residential homes, a two wire system is employed for electrical wiring, allowing for efficient distribution of electricity with minimal material costs.One of the most common applications of a two wire system can be found in telecommunication networks. In these systems, two wires are utilized to carry voice signals over long distances. The use of a two wire system in telephone lines has enabled millions of people to communicate seamlessly across vast distances. The technology behind this system has evolved significantly, but the core principle remains the same: two wires working together to facilitate communication.Moreover, in industrial settings, a two wire system is often used in sensors and control devices. Many sensors, such as temperature or pressure sensors, operate on a two wire system, which allows them to send data back to a central control unit while receiving power simultaneously through the same wires. This not only simplifies the installation process but also reduces the amount of wiring needed, thereby minimizing the possibility of errors and failures.However, it is important to note that while a two wire system offers several benefits, it also comes with certain limitations. For example, the distance over which signals can be transmitted may be restricted due to signal degradation. In cases where long-distance transmission is required, additional measures, such as amplifiers or repeaters, may need to be employed to maintain signal integrity.In conclusion, the two wire system plays a crucial role in both residential and industrial applications. Its simplicity and efficiency make it an ideal choice for various electrical and communication needs. As technology continues to advance, it is likely that the two wire system will evolve further, integrating new innovations that enhance its functionality and performance. Understanding the principles and applications of a two wire system is essential for anyone involved in electrical engineering or telecommunications, as it forms the backbone of many modern systems today.

‘两线系统’的概念在各种电气和通信应用中是基础性的。实质上，‘两线系统’指的是一种配置，其中使用两根电线将电力或信号从一个点传输到另一个点。这个系统因其简单性和成本效益而特别有利。例如，在许多住宅中，采用‘两线系统’进行电气布线，从而以最小的材料成本有效分配电力。‘两线系统’最常见的应用可以在电信网络中找到。在这些系统中，两根电线用于长距离传递语音信号。‘两线系统’在电话线路中的使用使数百万人能够在广阔的距离上无缝沟通。这个系统背后的技术已经显著发展，但核心原则仍然不变：两根电线共同工作以促进通信。此外，在工业环境中，‘两线系统’通常用于传感器和控制设备。许多传感器，如温度或压力传感器，依赖于‘两线系统’运行，这使得它们能够同时通过同一根电线向中央控制单元发送数据并接收电源。这不仅简化了安装过程，还减少了所需电缆的数量，从而最小化了错误和故障的可能性。然而，重要的是要注意，虽然‘两线系统’提供了多个好处，但它也有一定的局限性。例如，由于信号衰减，信号可以传输的距离可能受到限制。在需要长距离传输的情况下，可能需要采取额外措施，如放大器或中继器，以维持信号的完整性。总之，‘两线系统’在住宅和工业应用中发挥着至关重要的作用。其简单性和效率使其成为各种电气和通信需求的理想选择。随着技术的不断进步，‘两线系统’可能会进一步发展，整合新的创新，增强其功能和性能。理解‘两线系统’的原理和应用对于任何参与电气工程或电信的人来说都是必不可少的，因为它构成了许多现代系统的基础。