trimming lever

简明释义

纵倾力臂

英英释义

例句

1.By moving the trimming lever, the aircraft can maintain its altitude without constant control input.

通过移动修整杆，飞机可以在不需要持续控制输入的情况下保持高度。

2.Before takeoff, the crew performed checks on the trimming lever to ensure it was functioning correctly.

起飞前，机组人员检查了修整杆以确保其正常工作。

3.The trimming lever is essential for adjusting the balance of the aircraft.

调节修整杆对调整飞机的平衡至关重要。

4.The pilot adjusted the trimming lever to ensure a smooth flight.

飞行员调整了修整杆以确保飞行平稳。

5.During turbulence, the co-pilot quickly accessed the trimming lever to stabilize the plane.

在颠簸期间，副驾驶迅速调节修整杆以稳定飞机。

作文

In the world of aviation, the term trimming lever refers to a critical control mechanism that pilots use to adjust the aircraft's flight attitude. The trimming lever allows pilots to fine-tune the balance of the aircraft, ensuring that it maintains a steady altitude and direction without requiring constant input on the control stick or yoke. This is particularly important during long flights, where fatigue can set in, and the ability to relieve some of the manual control can enhance both comfort and safety.When an aircraft is flying, various forces act upon it, including lift, weight, thrust, and drag. The trimming lever helps manage these forces by adjusting the position of control surfaces like the elevator, ailerons, and rudder. By moving the trimming lever, a pilot can change the aerodynamic characteristics of the aircraft, allowing it to fly more efficiently. For instance, if a plane tends to nose up, the pilot can use the trimming lever to lower the elevator slightly, which will help the aircraft maintain a level flight path without needing to exert continuous pressure on the control column.Moreover, the trimming lever is not just a tool for comfort; it plays a vital role in fuel efficiency. When an aircraft is properly trimmed, it requires less power from the engines to maintain its flight path. This reduction in engine workload can lead to significant fuel savings over long distances, making the trimming lever an essential component for cost-effective flying.The operation of the trimming lever can vary between different types of aircraft. In small general aviation planes, the trimming lever might be a simple dial or switch that the pilot adjusts manually. In contrast, larger commercial jets may have more sophisticated electronic systems that automatically adjust trim based on flight conditions. Regardless of the design, the fundamental purpose remains the same: to improve the handling characteristics of the aircraft and reduce pilot workload.Training to use the trimming lever is an integral part of pilot education. During flight training, pilots learn how to recognize when trim adjustments are necessary and how to make those adjustments effectively. Understanding the function of the trimming lever can greatly enhance a pilot's ability to operate an aircraft smoothly and efficiently. New pilots often practice using the trimming lever during their lessons, gradually becoming more familiar with how it impacts the aircraft's performance.In conclusion, the trimming lever is a small but mighty tool in the cockpit that significantly influences an aircraft's flight dynamics. It allows pilots to achieve optimal performance and comfort while flying, contributing to safer and more economical operations. Whether flying a small private plane or a large commercial airliner, understanding and effectively using the trimming lever is crucial for any pilot aiming for excellence in aviation. The mastery of this tool not only enhances the flying experience but also underscores the importance of precision and control in the art of aviation.

在航空领域，术语trimming lever指的是飞行员用来调整飞机飞行姿态的关键控制机制。trimming lever允许飞行员微调飞机的平衡，确保其在不需要持续操作控制杆或操纵杆的情况下保持稳定的高度和方向。这在长途飞行中尤为重要，因为疲劳可能会影响飞行员的表现，而能够减轻一些手动控制的压力可以提高舒适性和安全性。当飞机飞行时，各种力量作用于它，包括升力、重力、推力和阻力。trimming lever通过调整控制面的位置（如升降舵、侧翼和方向舵）来帮助管理这些力量。通过移动trimming lever，飞行员可以改变飞机的气动特性，使其飞行更加高效。例如，如果飞机有向上抬头的趋势，飞行员可以使用trimming lever稍微降低升降舵，这将帮助飞机在不需要不断施加压力于控制柱的情况下保持水平飞行路径。此外，trimming lever不仅是一个舒适工具，它在燃油效率方面也发挥着重要作用。当飞机经过适当修整时，维持飞行路径所需的发动机功率就会减少。这种发动机工作负荷的降低可以在长距离飞行中带来显著的燃油节省，使得trimming lever成为成本效益飞行的重要组成部分。trimming lever的操作在不同类型的飞机之间可能有所不同。在小型通用航空飞机中，trimming lever可能是一个简单的旋钮或开关，飞行员手动调整。相比之下，更大的商用喷气机可能拥有更复杂的电子系统，根据飞行条件自动调整修整。尽管设计不同，但基本目的保持不变：改善飞机的操控特性并减少飞行员的工作负担。学习使用trimming lever是飞行员教育的重要组成部分。在飞行训练中，飞行员学习如何识别何时需要进行修整调整，以及如何有效地进行这些调整。理解trimming lever的功能可以大大增强飞行员平稳高效操作飞机的能力。新飞行员通常在课程中练习使用trimming lever，逐渐熟悉它对飞机性能的影响。总之，trimming lever是驾驶舱中一个小但强大的工具，对飞机的飞行动态有显著影响。它使飞行员能够在飞行中实现最佳性能和舒适性，为更安全、更经济的操作做出贡献。无论是驾驶小型私人飞机还是大型商业客机，理解和有效使用trimming lever都是任何追求航空卓越的飞行员的关键。掌握这一工具不仅增强了飞行体验，还强调了在航空艺术中精确和控制的重要性。