transom drive

简明释义

船尾机驱动

英英释义

例句

1.Installing a new transom drive can enhance your boat's performance.

安装新的transom drive可以提升你船只的性能。

2.We had to replace the transom drive after it was damaged during the storm.

在风暴中受损后，我们不得不更换transom drive。

3.The mechanic recommended a specific brand of transom drive for better efficiency.

机械师推荐了一种特定品牌的transom drive以提高效率。

4.The boat's speed improved significantly after we upgraded the transom drive.

在我们升级了transom drive之后，船的速度显著提高。

5.Make sure to check the transom drive for any signs of wear before heading out on the water.

在出海之前，一定要检查一下transom drive是否有磨损的迹象。

作文

In the world of boating and marine engineering, understanding the various components that contribute to a boat's performance is crucial. One such component that often comes up in discussions about boat propulsion systems is the transom drive. A transom drive refers to a type of boat propulsion system that is mounted on the transom, which is the flat surface at the rear of the boat. This design allows for efficient power transfer from the engine to the water, resulting in improved speed and maneuverability.The transom drive system typically consists of an engine that is either inboard or outboard, coupled with a drive unit that extends through the transom into the water. This configuration has several advantages over traditional outboard motors. For one, the transom drive setup can provide better weight distribution, which enhances the stability of the boat while it is in motion. Additionally, by positioning the drive unit closer to the center of the boat, manufacturers can achieve a more balanced performance, reducing the likelihood of porpoising, a condition where the boat repeatedly rises and falls on the water's surface.Another significant benefit of the transom drive system is its versatility. Many modern boats are designed with this type of drive in mind, allowing for various configurations and styles. Whether it's a sleek speedboat or a robust fishing vessel, the transom drive can be adapted to meet different needs. This adaptability is particularly important for boaters who require specific features, such as increased fuel efficiency or enhanced handling capabilities.Moreover, maintenance of a transom drive system tends to be more straightforward than that of other propulsion systems. Since the drive unit is easily accessible from the rear of the boat, routine inspections and repairs can be performed without excessive hassle. This ease of maintenance not only saves time but also reduces long-term costs associated with boat ownership.However, it is essential to note that the transom drive system is not without its challenges. One of the primary concerns is the potential for cavitation, a phenomenon that occurs when the pressure in the water around the propeller drops too low, causing bubbles to form. These bubbles can collapse violently, leading to damage of the propeller and decreased performance. Therefore, proper installation and alignment of the transom drive are critical to preventing such issues.Additionally, while the transom drive offers many advantages, it may not be suitable for all types of boating activities. For instance, in shallow waters, a traditional outboard motor may perform better due to its ability to tilt up and reduce the draft of the boat. Therefore, boaters should carefully consider their specific needs and conditions before opting for a transom drive system.In conclusion, the transom drive is an essential aspect of modern boating technology that enhances the performance and versatility of various watercraft. By understanding its benefits and limitations, boaters can make informed decisions about their propulsion systems, ensuring a safer and more enjoyable experience on the water. As the boating industry continues to evolve, the transom drive will undoubtedly play a vital role in shaping the future of marine propulsion.

在船舶和海洋工程的世界中，理解构成船只性能的各种组件至关重要。一个在关于船舶推进系统的讨论中经常出现的组件是transom drive。transom drive指的是一种安装在船尾平面（即船的后部）的船只推进系统。这种设计允许发动机与水之间有效地传递动力，从而提高速度和机动性。transom drive系统通常由一个内置或外置发动机组成，并与一个穿过船尾延伸到水中的驱动单元相连接。这种配置相比传统的舷外马达有几个优点。首先，transom drive设置可以提供更好的重量分布，从而增强船只在运动中的稳定性。此外，通过将驱动单元靠近船的中心，制造商可以实现更平衡的性能，减少船只在水面上反复上下起伏的可能性，这种现象被称为“翻腾”。transom drive系统的另一个重要好处是其多功能性。许多现代船只都是以这种类型的驱动为设计基础，可以满足不同的配置和风格。无论是流线型的快艇还是结实的渔船，transom drive都可以适应不同的需求。这种适应性对于需要特定功能的船主尤为重要，例如提高燃油效率或增强操控能力。此外，transom drive系统的维护往往比其他推进系统更为简单。由于驱动单元从船的后部易于接触，日常检查和维修可以在没有过多麻烦的情况下进行。这种维护的便利性不仅节省了时间，还降低了与船舶所有权相关的长期成本。然而，需要注意的是，transom drive系统并非没有挑战。主要的关注点之一是气蚀的潜在风险，这是一种当水中螺旋桨周围的压力过低时发生的现象，导致气泡形成。这些气泡会剧烈崩溃，造成螺旋桨损坏和性能下降。因此，正确安装和对齐transom drive至关重要，以防止此类问题。此外，尽管transom drive提供了许多优点，但它可能并不适合所有类型的航海活动。例如，在浅水区，传统的舷外马达可能表现得更好，因为它能够抬高并减少船只的吃水。因此，船主在选择transom drive系统之前应仔细考虑他们的具体需求和环境。总之，transom drive是现代船舶技术的重要组成部分，增强了各种水上交通工具的性能和多样性。通过理解其优缺点，船主可以就其推进系统做出明智的决策，确保在水上更安全、更愉快的体验。随着船舶行业的不断发展，transom drive无疑将在塑造海洋推进的未来中发挥重要作用。