transformer bushing

简明释义

变压器套管

英英释义

例句

1.The engineer recommended replacing the old transformer bushing with a new one.

工程师建议将旧的变压器套管更换为新的。

2.Regular maintenance of the transformer bushing is crucial for the longevity of the transformer.

定期维护变压器套管对变压器的使用寿命至关重要。

3.The technician inspected the transformer bushing to ensure there were no signs of wear.

技术人员检查了变压器套管，以确保没有磨损的迹象。

4.During the outage, we discovered that the transformer bushing had developed a leak.

在停电期间，我们发现变压器套管出现了泄漏。

5.A faulty transformer bushing can lead to electrical failures in the power system.

故障的变压器套管可能导致电力系统中的电气故障。

作文

In the world of electrical engineering, components play a crucial role in ensuring the efficiency and safety of power systems. One such component is the transformer bushing, which is essential for the operation of electrical transformers. A transformer bushing is an insulator that allows electrical conductors to pass through the grounded wall of a transformer while maintaining insulation between the conductor and the transformer body. This component is vital because it helps prevent electrical faults that can lead to system failures or even catastrophic accidents.The design of a transformer bushing is quite sophisticated. Typically made from materials like porcelain or composite polymers, these bushings must withstand high voltages and environmental conditions. The ability of a transformer bushing to endure temperature fluctuations and humidity is critical, as transformers are often located in outdoor environments. Moreover, the mechanical strength of the bushing must be sufficient to support the weight of the conductors and withstand any physical stresses.One of the most significant functions of a transformer bushing is to provide a pathway for electrical current while ensuring that there is no leakage of electricity. This is particularly important in high-voltage transformers, where even a small failure can result in significant power losses or dangerous situations. The insulation properties of the transformer bushing are therefore paramount, as they prevent short circuits and protect both the transformer and the surrounding equipment.Over the years, advancements in technology have led to the development of more efficient and reliable transformer bushings. Innovations such as silicone rubber insulators have improved performance in adverse weather conditions, reducing maintenance needs and increasing the lifespan of transformers. Additionally, modern transformer bushings are designed with monitoring capabilities that allow for real-time assessment of their condition. This proactive approach to maintenance helps utilities avoid unexpected outages and ensure a steady supply of electricity to consumers.Furthermore, understanding the role of a transformer bushing is essential for anyone involved in the design, installation, or maintenance of electrical systems. Engineers must carefully select the appropriate type of bushing based on the specific requirements of the transformer and the operating environment. Factors such as voltage rating, load capacity, and environmental conditions all influence the choice of a transformer bushing.In conclusion, the transformer bushing is a critical component in the field of electrical engineering, allowing for the safe and efficient operation of transformers. Its design and functionality are integral to preventing electrical faults and ensuring the longevity of power systems. As technology continues to evolve, the importance of the transformer bushing will only grow, making it a key focus for engineers and technicians alike. Understanding its role not only enhances one's knowledge of electrical systems but also underscores the importance of safety and reliability in the generation and distribution of electricity.

在电气工程的世界中，组件在确保电力系统的效率和安全性方面发挥着至关重要的作用。其中一个组件是变压器绝缘套管，它对电气变压器的操作至关重要。变压器绝缘套管是一种绝缘体，允许电导体穿过变压器的接地壁，同时保持导体与变压器机壳之间的绝缘。这一组件至关重要，因为它有助于防止可能导致系统故障甚至灾难性事故的电气故障。变压器绝缘套管的设计相当复杂。通常由瓷器或复合聚合物等材料制成，这些绝缘套管必须承受高电压和环境条件。变压器绝缘套管耐受温度波动和湿度的能力至关重要，因为变压器通常位于户外环境中。此外，绝缘套管的机械强度必须足够支持导体的重量并承受任何物理压力。变压器绝缘套管最重要的功能之一是提供电流的通道，同时确保没有电力泄漏。这在高压变压器中尤为重要，因为即使是小故障也可能导致显著的电力损失或危险情况。因此，变压器绝缘套管的绝缘特性至关重要，因为它们可以防止短路并保护变压器及周围设备。多年来，技术的进步导致了更高效、更可靠的变压器绝缘套管的发展。诸如硅橡胶绝缘体等创新改善了在恶劣天气条件下的性能，减少了维护需求并延长了变压器的使用寿命。此外，现代变压器绝缘套管设计了监测功能，可以实时评估其状态。这种主动的维护方法帮助公用事业公司避免意外停电，并确保向消费者提供稳定的电力供应。此外，了解变压器绝缘套管的作用对于任何参与电气系统设计、安装或维护的人来说都是至关重要的。工程师必须根据变压器的具体要求和操作环境仔细选择适当类型的绝缘套管。电压等级、负载能力和环境条件等因素都会影响变压器绝缘套管的选择。总之，变压器绝缘套管是电气工程领域中的关键组件，允许变压器的安全高效运行。它的设计和功能对于防止电气故障和确保电力系统的持久性至关重要。随着技术的不断发展，变压器绝缘套管的重要性只会增加，使其成为工程师和技术人员关注的重点。理解其作用不仅增强了人们对电气系统的知识，还强调了在电力的生成和分配中安全性和可靠性的重要性。