torque margin

简明释义

转矩裕量

英英释义

例句

1.The engineer calculated the torque margin to ensure the motor could handle the load without failure.

工程师计算了扭矩裕量以确保电机能够承受负载而不会失效。

2.During testing, we found that the torque margin was lower than expected, indicating a potential risk.

在测试过程中，我们发现扭矩裕量低于预期，表明存在潜在风险。

3.A higher torque margin is crucial for applications involving heavy machinery.

在涉及重型机械的应用中，较高的扭矩裕量至关重要。

4.The torque margin must be considered when selecting components for the drivetrain.

在选择传动系统组件时，必须考虑扭矩裕量。

5.To improve reliability, the design team aimed for a larger torque margin in the new product.

为了提高可靠性，设计团队在新产品中目标是更大的扭矩裕量。

作文

In the engineering field, particularly in mechanical and automotive engineering, the concept of torque margin is crucial for ensuring the reliability and efficiency of machines. The term torque margin refers to the difference between the maximum torque that a component can handle and the actual torque being applied to it during operation. This margin is important because it indicates how much additional torque the system can tolerate before reaching its limits. A sufficient torque margin is essential for preventing mechanical failure, ensuring safety, and prolonging the lifespan of machinery.When designing mechanical systems, engineers must calculate the expected torque requirements based on the loads and forces that will be encountered during operation. By understanding the required torque, they can then establish an appropriate torque margin. For instance, if a motor is rated to produce a maximum torque of 100 Nm, but the application requires only 60 Nm, the torque margin would be 40 Nm. This excess capacity allows for unforeseen circumstances such as sudden load increases or friction changes, which could otherwise lead to system failure.Moreover, a well-defined torque margin contributes to the overall performance of the machinery. Systems with inadequate margins may experience overheating, wear, and tear, or even catastrophic failures. For example, in automotive applications, if the engine's torque output is too close to the threshold limit, it can lead to severe engine damage over time. Therefore, engineers often aim for a torque margin of at least 20-30% above the expected maximum operational torque.In addition to mechanical integrity, the torque margin also plays a role in energy efficiency. When components operate within their torque margin, they tend to function more smoothly, consuming less energy and reducing fuel consumption in vehicles. This is particularly significant in today's world, where sustainability and energy efficiency are paramount.To sum up, the concept of torque margin is vital in engineering design and application. It not only ensures the safety and durability of mechanical systems but also enhances their performance and efficiency. By carefully calculating and maintaining an adequate torque margin, engineers can prevent failures, reduce maintenance costs, and contribute to the overall sustainability of their designs. As technology advances and machines become more complex, the importance of understanding and applying the principles of torque margin will continue to grow, making it an essential consideration for future innovations in engineering.

在工程领域，特别是机械和汽车工程中，扭矩裕度的概念对于确保机器的可靠性和效率至关重要。扭矩裕度一词指的是组件能够承受的最大扭矩与在操作过程中实际施加的扭矩之间的差值。这个裕度很重要，因为它表明系统在达到极限之前可以容忍多少额外扭矩。足够的扭矩裕度对于防止机械故障、确保安全以及延长机械寿命至关重要。在设计机械系统时，工程师必须根据操作过程中将遇到的负载和力来计算预期的扭矩要求。通过了解所需的扭矩，他们可以建立适当的扭矩裕度。例如，如果一个电动机的额定最大扭矩为100牛·米，但应用只需要60牛·米，则扭矩裕度为40牛·米。这种额外的容量允许应对意外情况，例如突然的负载增加或摩擦变化，否则可能导致系统故障。此外，良好的扭矩裕度有助于机械的整体性能。裕度不足的系统可能会经历过热、磨损，甚至灾难性故障。例如，在汽车应用中，如果发动机的扭矩输出过于接近阈值限制，随着时间的推移可能会导致严重的发动机损坏。因此，工程师通常旨在使扭矩裕度至少高于预期最大操作扭矩的20-30%。除了机械完整性外，扭矩裕度还在能效方面发挥着作用。当组件在其扭矩裕度内运行时，它们往往更平稳地工作，消耗更少的能源，并减少车辆的燃料消耗。在当今社会，可持续性和能效至关重要，这一点尤其重要。总而言之，扭矩裕度的概念在工程设计和应用中至关重要。它不仅确保机械系统的安全性和耐用性，还提高了其性能和效率。通过仔细计算和保持足够的扭矩裕度，工程师可以防止故障，降低维护成本，并为其设计的整体可持续性做出贡献。随着技术的进步和机器变得更加复杂，理解和应用扭矩裕度原则的重要性将继续增长，使其成为未来工程创新的一个重要考虑因素。