timber load line

简明释义

木材载重线

英英释义

例句

1.The captain checked the timber load line before setting sail to ensure the ship was not overloaded.

船长在出航前检查了木材载重线以确保船只没有超载。

2.It is crucial to adhere to the timber load line regulations to prevent accidents at sea.

遵守木材载重线规定对于防止海上事故至关重要。

3.During inspections, the surveyor paid close attention to the timber load line markings on the hull.

在检查过程中，检查员密切关注船体上的木材载重线标记。

4.The timber load line indicates the maximum depth to which a ship can be safely loaded.

木材载重线表示船只可以安全装载的最大深度。

5.Failure to follow the timber load line can result in severe penalties for shipping companies.

未能遵循木材载重线可能会导致航运公司受到严厉处罚。

作文

The concept of the timber load line is crucial in the field of marine engineering and ship design. It refers to a specific marking on the hull of a vessel that indicates the maximum depth to which a ship can be safely loaded with timber or other similar cargoes. This line ensures that the ship maintains proper buoyancy and stability while at sea, which is vital for the safety of both the vessel and its crew. Understanding the timber load line is essential for shipowners, captains, and those involved in maritime trade, as it directly impacts the efficiency and safety of shipping operations.In practical terms, the timber load line is typically marked on the side of the ship's hull and is part of a broader system of load lines used for various types of cargo. These load lines are established based on international regulations, such as the International Convention on Load Lines, which aims to prevent overloading and ensure that vessels are not submerged too deeply in water. When a ship is loaded beyond its designated timber load line, it risks capsizing or experiencing structural damage due to excessive stress on its hull.The importance of adhering to the timber load line cannot be overstated. For instance, if a ship carrying timber is overloaded, it may struggle to maneuver effectively, especially in rough seas. This can lead to dangerous situations where the ship might list or roll excessively, putting the crew and cargo at risk. Additionally, overloading can cause a ship to sit lower in the water than intended, increasing the likelihood of hitting submerged objects or running aground.Moreover, the timber load line is not just a guideline but a legal requirement. Maritime authorities conduct inspections to ensure compliance with load line regulations, and failure to adhere to these standards can result in hefty fines or even the detention of the vessel until it meets safety requirements. Therefore, ship operators must be diligent in calculating the weight and distribution of cargo to remain within safe limits.In conclusion, the timber load line plays a vital role in maritime operations, ensuring that ships are loaded safely and efficiently. It serves as a critical reference point for maintaining stability and safety at sea. As global trade continues to expand, understanding and respecting the timber load line will be increasingly important for all stakeholders in the shipping industry. By prioritizing safety and compliance with load line regulations, the maritime community can help prevent accidents and protect lives at sea.

“木材载重线”的概念在海洋工程和船舶设计领域至关重要。它指的是船体上的特定标记，表示船只可以安全装载木材或其他类似货物的最大深度。这条线确保船只在海上保持适当的浮力和稳定性，这对船只及其船员的安全至关重要。理解“木材载重线”对船东、船长以及参与海运贸易的人士来说是必不可少的，因为它直接影响到运输操作的效率和安全。在实际操作中，“木材载重线”通常标记在船体侧面，是用于各种类型货物的更广泛的载重线系统的一部分。这些载重线是根据国际法规建立的，例如《国际载重线公约》，旨在防止超载，并确保船只不会在水中沉得太深。当船只超出其指定的“木材载重线”时，可能会面临倾覆或因过度压力而导致结构损坏的风险。遵守“木材载重线”的重要性不容小觑。例如，如果一艘装载木材的船只超载，它可能难以有效操控，尤其是在恶劣海况下。这可能导致危险情况的发生，船只可能会过度倾斜或摇摆，危及船员和货物。此外，超载还可能导致船只在水中坐得比预期低，从而增加撞击水下物体或搁浅的可能性。此外，“木材载重线”不仅仅是一个指导方针，而是法律要求。海事当局会进行检查，以确保遵守载重线规定，不遵守这些标准可能会导致巨额罚款或甚至扣留船只，直到其满足安全要求。因此，船舶运营商必须认真计算货物的重量和分布，以保持在安全限度内。总之，“木材载重线”在海洋作业中发挥着至关重要的作用，确保船只的安全和高效装载。它作为维护海上稳定和安全的关键参考点。随着全球贸易的不断扩展，理解和尊重“木材载重线”将对航运业的所有利益相关者变得越来越重要。通过优先考虑安全和遵守载重线规定，海事界可以帮助防止事故并保护海上的生命。