stern bulkhead

简明释义

尾舱壁

英英释义

例句

1.The ship's safety regulations require that the stern bulkhead (船尾隔舱壁) be inspected regularly for any signs of wear.

船只的安全规定要求定期检查stern bulkhead (船尾隔舱壁) 是否有磨损迹象。

2.The design of the yacht includes a watertight stern bulkhead (船尾隔舱壁) for added safety.

这艘游艇的设计包括一个防水的stern bulkhead (船尾隔舱壁)，以增加安全性。

3.The engineer pointed out that a damaged stern bulkhead (船尾隔舱壁) could lead to catastrophic flooding.

工程师指出，受损的stern bulkhead (船尾隔舱壁) 可能导致灾难性的洪水。

4.During the storm, the crew reinforced the stern bulkhead (船尾隔舱壁) to prevent water from entering the engine room.

在风暴期间，船员加固了stern bulkhead (船尾隔舱壁)，以防止水进入机舱。

5.To comply with maritime laws, every vessel must have a properly constructed stern bulkhead (船尾隔舱壁).

为了遵守海事法律，每艘船都必须有一个正确建造的stern bulkhead (船尾隔舱壁)。

作文

In the realm of naval architecture and marine engineering, the term stern bulkhead refers to a crucial structural component located at the rear end of a ship. This vertical partition serves multiple purposes that are essential for both the functionality and safety of the vessel. The stern bulkhead not only provides structural integrity but also plays a significant role in compartmentalization, which is vital for maintaining buoyancy and stability during maritime operations.One of the primary functions of the stern bulkhead is to separate different sections of the ship. By doing so, it helps to contain flooding in case of an emergency, such as a hull breach. If water were to enter the ship, the stern bulkhead would act as a barrier, preventing the water from spreading throughout the entire vessel. This compartmentalization is a fundamental principle in ship design, often referred to as ‘watertight integrity’. It ensures that even if one section of the ship is compromised, the others can remain operational, allowing the crew to manage the situation effectively.Moreover, the stern bulkhead contributes to the overall stability of the ship. Ships are designed to float on water, and their stability depends on a variety of factors, including weight distribution and the center of gravity. The stern bulkhead aids in maintaining this balance by providing a solid structural element that supports the rear part of the vessel. This is particularly important during rough seas when the ship may experience pitching and rolling. A well-designed stern bulkhead can help mitigate these movements, ensuring a smoother ride for both the crew and passengers.In addition to its structural roles, the stern bulkhead is also a space where various equipment and systems are housed. For instance, it may contain access points for propulsion systems, steering gear, or even storage areas for essential supplies. The layout of the stern bulkhead can significantly impact the efficiency of operations on board. Properly designed access points can facilitate maintenance and repairs, which are critical for the safe operation of the vessel.Furthermore, the stern bulkhead plays a role in the aesthetic design of the ship. While functionality is paramount, the appearance of a ship cannot be overlooked. The design of the stern bulkhead can influence the overall look of the vessel, contributing to its sleekness and modernity. Shipbuilders often strive to balance functionality with aesthetics, creating a visually appealing yet practical structure.In conclusion, the stern bulkhead is more than just a wall at the back of a ship; it is a vital component that enhances the vessel's safety, stability, and functionality. Understanding the importance of the stern bulkhead allows us to appreciate the complexities of ship design and the engineering principles that keep these magnificent vessels afloat. As we continue to explore advancements in marine technology, the role of the stern bulkhead will undoubtedly evolve, but its significance in maritime safety will always remain paramount.

在海洋建筑和海洋工程领域，术语stern bulkhead指的是位于船舶后端的一个重要结构组件。这个垂直隔断具有多重功能，对于船只的功能性和安全性至关重要。stern bulkhead不仅提供结构完整性，还在舱室分隔中发挥重要作用，这对于在海上操作时维持浮力和稳定性至关重要。stern bulkhead的主要功能之一是将船舶的不同部分分开。通过这样做，它有助于在紧急情况下，例如船体破裂时，限制洪水的蔓延。如果水进入船舶，stern bulkhead将作为障碍，防止水扩散到整个船只。这种舱室分隔是船舶设计中的基本原则，通常被称为“防水完整性”。它确保即使船舶的一个部分受到损坏，其他部分仍然可以正常运作，使船员能够有效管理情况。此外，stern bulkhead还有助于船舶的整体稳定性。船舶被设计成漂浮在水面上，其稳定性取决于多种因素，包括重量分布和重心。stern bulkhead通过提供一个坚固的结构元素来支持船舶的后部，从而帮助保持这种平衡。这在粗糙海况下尤其重要，因为船舶可能会经历上下颠簸。设计良好的stern bulkhead可以帮助减轻这些运动，为船员和乘客提供更平稳的航行体验。除了其结构作用外，stern bulkhead还是各种设备和系统的存放空间。例如，它可能包含推进系统、舵机或甚至存储必要物资的通道。stern bulkhead的布局可以显著影响船上操作的效率。适当设计的通道可以促进维护和修理，这对船舶的安全操作至关重要。此外，stern bulkhead在船舶的美学设计中也起着作用。虽然功能性是首要考虑，但船舶的外观也不能被忽视。stern bulkhead的设计可以影响船舶的整体外观，增强其流线型和现代感。造船商通常努力在功能性和美学之间取得平衡，创造出既美观又实用的结构。总之，stern bulkhead不仅仅是船舶后面的墙；它是一个重要的组成部分，增强了船舶的安全性、稳定性和功能性。理解stern bulkhead的重要性使我们能够欣赏船舶设计的复杂性以及保持这些宏伟船只漂浮的工程原理。随着我们继续探索海洋技术的进步，stern bulkhead的角色无疑会发展，但其在海事安全中的重要性将始终是首要的。