sheer at stern post

简明释义

尾舷弧

英英释义

例句

1.The sudden change in wind direction caused the yacht to sheer at stern post unexpectedly.

风向的突然变化使游艇意外地在船尾柱处偏移。

2.As we navigated through the narrow channel, we had to sheer at stern post to avoid the rocky outcrop.

当我们穿过狭窄的水道时，我们不得不在船尾柱处偏移以避开岩石突出物。

3.The captain ordered the crew to adjust the sails as we began to sheer at stern post, avoiding a collision with the nearby vessel.

船长命令船员调整帆，因为我们开始在船尾柱处偏移，以避免与附近的船只相撞。

4.To maneuver around the dock, the crew practiced how to sheer at stern post effectively.

为了在码头周围操控，船员们练习如何有效地在船尾柱处偏移。

5.During the storm, the ship had to sheer at stern post to maintain stability and prevent capsizing.

在暴风雨中，船只不得不在船尾柱处偏移以保持稳定，防止倾覆。

作文

Understanding nautical terminology is crucial for anyone interested in maritime activities, whether it be sailing, fishing, or even just enjoying a day on the water. One such term that often comes up in discussions about ship handling and navigation is sheer at stern post. This phrase refers to the way a vessel's hull is designed and how it interacts with the water, particularly at the stern or rear of the ship. To fully grasp this concept, we must break down its components and explore its significance in maritime practices.Firstly, the term "sheer" in a nautical context describes the curvature or slope of a ship's deck from bow to stern. It is an essential aspect of a ship's design, affecting not only its aesthetic appeal but also its performance in the water. A well-designed sheer allows for better water flow over the hull, improving the vessel's stability and maneuverability. When we specifically talk about sheer at stern post, we are focusing on the stern section of the boat where the hull meets the transom, which is the flat part at the back of the ship.The stern post is a vital structural component of a ship, providing support for the rudder and often housing various fittings that are crucial for steering and stability. The sheer at this point can affect how the vessel handles during various maneuvers. For instance, if a boat has too much sheer at the stern post, it may cause the vessel to behave unpredictably in rough waters, making it harder to control.Moreover, understanding sheer at stern post is not just about the physical characteristics of the ship; it also has practical implications for navigation. Sailors must be aware of how their vessel's design influences its performance under different conditions. A boat with a high sheer at the stern post might perform differently when turning or navigating through waves compared to a vessel with a lower sheer. Therefore, knowledge of this term becomes invaluable when making decisions about speed, direction, and safety while on the water.In addition to its technical aspects, the concept of sheer at stern post also ties into broader themes within maritime culture. For example, traditional shipbuilding techniques often emphasize the importance of sheer in not only ensuring seaworthiness but also in preserving the heritage and craftsmanship of boat making. Many sailors and boat builders take great pride in the sheer of their vessels, viewing it as a reflection of their skills and dedication to the craft.Furthermore, the study of sheer and its effects is an ongoing field of research in naval architecture. Engineers and designers continuously seek to improve hull shapes and sheer lines to enhance efficiency and safety. Innovations in materials and technology have led to new designs that challenge traditional notions of sheer, proving that this term remains relevant in modern maritime discussions.In conclusion, the phrase sheer at stern post encompasses a wealth of knowledge that is essential for understanding ship design and performance. From its impact on stability and handling to its cultural significance in maritime traditions, this term serves as a reminder of the intricate relationship between a vessel's structure and its operation on the water. Whether you are a seasoned sailor or a curious novice, familiarizing yourself with terms like sheer at stern post will undoubtedly enhance your appreciation of the art and science of sailing.

理解海洋术语对于任何对海事活动感兴趣的人来说都是至关重要的，无论是航行、钓鱼，还是仅仅享受一天的水上时光。一个在讨论船舶操控和导航时常常出现的术语是sheer at stern post。这个短语指的是船体的设计方式，以及它与水的相互作用，特别是在船的尾部或后部。要充分理解这一概念，我们必须分解其组成部分，并探索其在海事实践中的重要性。首先，“sheer”在海洋上下文中描述了船舶从船头到船尾甲板的曲线或坡度。这是船舶设计的重要方面，影响着船舶的美观以及在水中的表现。良好的sheer能够改善水流在船体上的流动，提高船舶的稳定性和操控性。当我们具体谈论sheer at stern post时，我们关注的是船尾部分，即船体与船尾平面相接的地方。船尾柱是船舶的重要结构组成部分，为舵提供支撑，并且通常容纳各种对操控和稳定性至关重要的配件。此处的sheer可能会影响船舶在各种操作中的表现。例如，如果一艘船在船尾柱处有过多的sheer，它可能会导致船舶在恶劣水域中表现不可预测，从而使控制变得更加困难。此外，理解sheer at stern post不仅仅是关于船舶的物理特征；它也对导航有实际意义。水手必须意识到他们船舶的设计如何影响其在不同条件下的表现。在转弯或穿越波浪时，船尾柱处高sheer的船只可能与低sheer的船只表现不同。因此，了解这个术语在做出关于速度、方向和安全的决策时变得极为重要。除了技术方面，sheer at stern post的概念还与海洋文化中的更广泛主题相关。例如，传统的造船技术通常强调sheer在确保适航性以及维护船只制造的遗产和工艺方面的重要性。许多水手和造船者对他们船只的sheer感到非常自豪，认为这是他们技能和对工艺奉献精神的体现。此外，sheer及其影响的研究仍然是海洋建筑学的一个持续研究领域。工程师和设计师不断寻求改进船体形状和sheer线，以提高效率和安全性。材料和技术的创新导致了新的设计，挑战了传统的sheer观念，证明这个术语在现代海事讨论中仍然具有相关性。总之，短语sheer at stern post包含了丰富的知识，对于理解船舶设计和性能至关重要。从其对稳定性和操控性的影响，到其在海洋传统中的文化意义，这个术语提醒我们船舶结构与其在水中操作之间的复杂关系。无论你是经验丰富的水手还是好奇的新手，熟悉像sheer at stern post这样的术语无疑会增强你对航海艺术和科学的欣赏。