rated value

简明释义

额定值

英英释义

例句

1.The rated value of the battery indicates how much energy it can store and deliver over time.

电池的额定值表示它可以储存和提供多少能量。

2.When selecting a power supply, make sure its rated value matches the requirements of your device.

在选择电源时，请确保其额定值与设备的要求相匹配。

3.The rated value of this circuit breaker is crucial for ensuring safety in electrical installations.

该断路器的额定值对于确保电气安装的安全至关重要。

4.The motor has a rated value of 5 horsepower, which means it can handle loads up to that limit.

这台电动机的额定值为5马力，这意味着它可以承受高达这个限制的负载。

5.To avoid overheating, always operate the equipment below its rated value.

为了避免过热，始终在设备的额定值以下操作。

作文

In the world of engineering and manufacturing, the term rated value plays a crucial role in determining the performance and reliability of various products. The rated value essentially refers to the maximum or minimum limit of a particular characteristic that a device or component can handle under specified conditions. For instance, in electrical appliances, the rated value often indicates the maximum voltage or current that the appliance can safely operate at without risking damage or failure. Understanding the rated value is essential for both manufacturers and consumers, as it ensures safety and efficiency in usage.When designing a product, engineers must carefully calculate the rated value based on various factors, including material properties, environmental conditions, and anticipated usage scenarios. If the rated value is exceeded, it can lead to catastrophic failures, such as overheating, short circuits, or even explosions in extreme cases. Therefore, adherence to the rated value is not just a guideline but a fundamental principle in engineering practices.For consumers, understanding the rated value of a product can significantly influence purchasing decisions. For example, when buying an electrical appliance, consumers should look for the rated value on the label to ensure that it matches their home’s electrical specifications. Using an appliance with a rated value that is too low for the household voltage can cause the appliance to malfunction or become a fire hazard. On the other hand, using an appliance with a rated value that is higher than necessary may lead to wasted energy and increased utility bills.In addition to electrical appliances, the concept of rated value extends to various fields, including automotive, aerospace, and construction. In the automotive industry, for example, the rated value of a vehicle’s engine indicates its power output and fuel efficiency. This information helps consumers make informed decisions about which vehicle suits their needs best. Similarly, in construction, the rated value of materials, such as beams and columns, determines their load-bearing capacity, ensuring the safety and stability of structures.Moreover, regulatory bodies often set standard rated values for products to ensure consistency and safety across the industry. These standards help prevent subpar products from entering the market and protect consumers from potential hazards. Compliance with these regulations requires manufacturers to rigorously test their products and accurately report the rated value to maintain transparency and trust.In conclusion, the term rated value is integral to various industries, serving as a benchmark for safety, efficiency, and performance. Whether you are an engineer designing a new product or a consumer selecting an appliance, understanding the rated value is essential. It not only ensures that products function as intended but also safeguards users from potential dangers associated with misuse or overloading. As technology advances and products become more complex, the importance of accurately defining and adhering to rated values will only continue to grow, highlighting the need for education and awareness in this area.

在工程和制造的世界中，术语rated value在确定各种产品的性能和可靠性方面起着至关重要的作用。rated value本质上是指设备或组件在特定条件下能够处理的某一特征的最大或最小限制。例如，在电器中，rated value通常表示该电器能够安全操作的最大电压或电流，而不会导致损坏或故障。理解rated value对制造商和消费者都至关重要，因为它确保了使用的安全性和效率。在设计产品时，工程师必须根据各种因素仔细计算rated value，包括材料特性、环境条件和预期使用场景。如果超过rated value，可能会导致灾难性的故障，例如过热、短路，甚至在极端情况下发生爆炸。因此，遵守rated value不仅仅是一个指导方针，而是工程实践中的基本原则。对于消费者来说，理解产品的rated value可以显著影响购买决策。例如，在购买电器时，消费者应查看标签上的rated value，以确保其与家庭的电气规格相匹配。使用rated value低于家庭电压的电器可能会导致电器故障或成为火灾隐患。另一方面，使用rated value高于必要值的电器可能会导致能源浪费和增加水电费。除了电器外，rated value的概念还扩展到汽车、航空航天和建筑等多个领域。例如，在汽车工业中，车辆发动机的rated value指示其功率输出和燃油效率。这些信息帮助消费者做出明智的决定，选择最适合自己需求的车辆。同样，在建筑中，材料如梁和柱的rated value决定了它们的承载能力，从而确保结构的安全性和稳定性。此外，监管机构通常为产品设定标准rated value，以确保行业内的一致性和安全性。这些标准有助于防止劣质产品进入市场，并保护消费者免受潜在危害。遵守这些规定要求制造商严格测试其产品，并准确报告rated value，以维护透明度和信任。总之，术语rated value对于各个行业都是不可或缺的，作为安全、效率和性能的基准。无论您是设计新产品的工程师，还是选择电器的消费者，理解rated value都是必不可少的。它不仅确保产品按预期功能运行，还保护用户免受因误用或超载而带来的潜在危险。随着技术的进步和产品的日益复杂，准确定义和遵守rated value的重要性只会继续增加，突显出这一领域教育和意识的必要性。