quick-acting fuse

简明释义

快速熔断器

英英释义

例句

1.The technician replaced the blown circuit breaker with a new quick-acting fuse 快断保险丝 to prevent further damage.

技术员用新的快断保险丝快断保险丝替换了烧坏的断路器，以防止进一步损坏。

2.The quick-acting fuse 快断保险丝 blew immediately when the overload occurred.

当过载发生时，快断保险丝快断保险丝立即熔断。

3.For sensitive electronics, using a quick-acting fuse 快断保险丝 is crucial to avoid damage.

对于敏感电子设备，使用快断保险丝快断保险丝是避免损坏的关键。

4.In high-speed machinery, a quick-acting fuse 快断保险丝 is essential for safety.

在高速机械中，快断保险丝快断保险丝对于安全至关重要。

5.When designing the electrical system, engineers opted for a quick-acting fuse 快断保险丝 to enhance responsiveness.

在设计电气系统时，工程师选择了快断保险丝快断保险丝以增强响应能力。

作文

In the world of electrical engineering and safety, the role of a fuse is crucial. A fuse acts as a protective device that prevents excessive current from flowing through an electrical circuit. Among various types of fuses, the quick-acting fuse (快速熔断器) stands out due to its ability to respond rapidly to overloads. This characteristic is particularly important in applications where equipment is sensitive to changes in current. The primary function of a quick-acting fuse (快速熔断器) is to disconnect the circuit almost instantaneously when it detects a fault condition. This swift action helps to protect not only the wiring but also the connected devices from damage caused by overheating or electrical fires. For example, in household appliances such as microwaves or washing machines, a quick-acting fuse (快速熔断器) can prevent catastrophic failures by cutting off the power supply before any significant damage occurs. One of the main advantages of using a quick-acting fuse (快速熔断器) is its ability to minimize downtime in industrial settings. When machinery is equipped with these fuses, the quick response time ensures that operations can resume quickly after a fault is cleared. This reliability is essential in manufacturing processes where every minute of downtime can result in substantial financial losses. However, it is also important to understand the limitations of quick-acting fuses (快速熔断器). While they are designed for rapid response, they may not be suitable for all applications. In situations where temporary surges in current are expected, such as during the startup of motors, a slower-acting fuse might be more appropriate to avoid nuisance tripping. Therefore, selecting the right type of fuse requires careful consideration of the specific requirements of the electrical system. In conclusion, the quick-acting fuse (快速熔断器) plays a vital role in ensuring electrical safety and protecting valuable equipment. Its rapid response to overloads makes it an essential component in many applications, from household electronics to industrial machinery. Understanding its function and limitations allows engineers and technicians to make informed decisions when designing and maintaining electrical systems. As technology continues to advance, the development of even more efficient and reliable fuses will undoubtedly enhance safety standards across various industries.

在电气工程和安全的世界中，熔断器的作用至关重要。熔断器作为一种保护装置，防止过量电流通过电路。在各种类型的熔断器中，快速熔断器 (quick-acting fuse) 因其能够迅速响应过载而脱颖而出。这一特性在设备对电流变化敏感的应用中特别重要。快速熔断器 (quick-acting fuse) 的主要功能是在检测到故障条件时几乎瞬时地断开电路。这种快速反应有助于保护电线以及连接设备免受过热或电气火灾造成的损坏。例如，在微波炉或洗衣机等家用电器中，快速熔断器 (quick-acting fuse) 可以通过在发生重大损坏之前切断电源来防止灾难性的故障。使用快速熔断器 (quick-acting fuse) 的主要优点之一是它能够最小化工业环境中的停机时间。当机器配备这些熔断器时，快速响应时间确保在故障被清除后操作可以迅速恢复。这种可靠性在制造过程中至关重要，因为每一分钟的停机都可能导致可观的财务损失。然而，理解快速熔断器 (quick-acting fuse) 的局限性也很重要。尽管它们旨在快速响应，但并不适合所有应用。在预计会出现暂时电流激增的情况下，例如电动机启动期间，较慢的熔断器可能更合适，以避免误动作。因此，选择合适类型的熔断器需要仔细考虑电气系统的具体要求。总之，快速熔断器 (quick-acting fuse) 在确保电气安全和保护贵重设备方面发挥着至关重要的作用。它对过载的快速响应使其成为许多应用中的重要组成部分，从家用电子产品到工业机械。理解其功能和局限性使工程师和技术人员能够在设计和维护电气系统时做出明智的决策。随着技术的不断进步，更高效、更可靠的熔断器的发展无疑将提高各行业的安全标准。