propeller blocking

简明释义

矫正螺旋桨

英英释义

例句

1.The pilot performed a thorough pre-flight check to ensure there was no propeller blocking.

飞行员进行了彻底的飞行前检查，以确保没有螺旋桨阻塞。

2.After the storm, the ground crew had to inspect for propeller blocking due to fallen branches.

暴风雨过后，地勤人员必须检查是否有由于倒下的树枝导致的螺旋桨阻塞。

3.The flight instructor emphasized the importance of checking for propeller blocking before takeoff.

飞行教练强调在起飞前检查是否有螺旋桨阻塞的重要性。

4.To avoid propeller blocking, always keep the area around the aircraft clear of obstacles.

为了避免螺旋桨阻塞，请始终保持飞机周围区域无障碍物。

5.During maintenance, the technician discovered propeller blocking caused by debris in the engine compartment.

在维护过程中，技术人员发现发动机舱内的碎片导致了螺旋桨阻塞。

作文

In the world of aviation, safety is paramount. One of the critical aspects of ensuring safety in flight operations is understanding various technical terms and their implications. Among these terms, propeller blocking plays a significant role, particularly in the context of aircraft maintenance and ground operations. Propeller blocking refers to the procedure of securing the propeller blades of an aircraft to prevent them from moving during maintenance or when the aircraft is parked. This practice is crucial because rotating propellers can pose serious hazards to ground crew and equipment. When an aircraft is not in use, especially in maintenance scenarios, it is essential to implement propeller blocking to ensure that the propellers do not inadvertently start rotating due to wind or other external forces.The importance of propeller blocking cannot be overstated. In aviation, accidents can happen in the blink of an eye, and many incidents have been attributed to negligence in following safety protocols. For instance, if a mechanic is working on an engine and fails to properly secure the propeller, the blades could start spinning unexpectedly, leading to severe injuries or even fatalities. Therefore, the implementation of propeller blocking is not merely a recommendation but a critical safety measure.Moreover, propeller blocking is part of a broader category of safety checks and procedures that are essential for maintaining an aircraft's airworthiness. Before any flight, pilots and ground crew conduct a series of pre-flight checks, which include verifying that all safety measures, including propeller blocking, have been properly executed. This ensures that the aircraft is safe for operation and minimizes the risk of accidents.In addition to its role in safety, propeller blocking also highlights the importance of training and education in the aviation industry. All personnel involved in aircraft maintenance and operations must be well-versed in safety protocols, including the correct methods for implementing propeller blocking. Training programs should emphasize the potential dangers associated with propellers and the necessity of adhering to established safety practices.Furthermore, the aviation industry continually evolves, with new technologies and practices emerging. As such, the methods and tools used for propeller blocking may also change over time. It is essential for aviation professionals to stay updated on the latest safety protocols and equipment to ensure that they can effectively implement propeller blocking and other safety measures.In conclusion, propeller blocking is a vital safety procedure in aviation that protects both personnel and equipment from the dangers posed by rotating propellers. Its significance extends beyond mere compliance with regulations; it embodies the commitment to safety that is foundational to the aviation industry. By understanding and implementing propeller blocking correctly, aviation professionals contribute to a safer flying environment for everyone involved. As we continue to advance in technology and knowledge, the principles of safety, including propeller blocking, will remain a cornerstone of aviation operations.

在航空世界中，安全至关重要。确保飞行操作安全的关键方面之一是理解各种技术术语及其含义。在这些术语中，propeller blocking（螺旋桨锁定）发挥着重要作用，特别是在飞机维护和地面操作的背景下。Propeller blocking指的是在维护或停放飞机时，固定飞机螺旋桨叶片以防止其移动的程序。这一做法至关重要，因为旋转的螺旋桨可能对地面工作人员和设备构成严重危险。当飞机未使用时，尤其是在维护场景中，实施propeller blocking至关重要，以确保螺旋桨不会因风或其他外部力量而意外旋转。Propeller blocking的重要性不容小觑。在航空领域，事故可能在瞬间发生，许多事件都归因于未遵循安全协议的疏忽。例如，如果一名机械师在工作发动机时未能正确固定螺旋桨，螺旋桨叶片可能会意外旋转，导致严重伤害甚至死亡。因此，实施propeller blocking不仅仅是建议，而是一项重要的安全措施。此外，propeller blocking也是确保飞机适航性的一系列安全检查和程序的一部分。在任何飞行之前，飞行员和地面工作人员都会进行一系列的起飞前检查，其中包括确认所有安全措施，包括propeller blocking，已得到妥善执行。这确保了飞机在操作中的安全性，并最大限度地降低了事故风险。除了其在安全中的作用，propeller blocking还突显了培训和教育在航空工业中的重要性。所有参与飞机维护和操作的人员必须熟悉安全协议，包括实施propeller blocking的正确方法。培训项目应强调与螺旋桨相关的潜在危险以及遵循既定安全实践的必要性。此外，航空业不断发展，新技术和实践不断涌现。因此，用于propeller blocking的方法和工具也可能随着时间的推移而变化。航空专业人员必须及时了解最新的安全协议和设备，以确保他们能够有效实施propeller blocking和其他安全措施。总之，propeller blocking是航空中一项至关重要的安全程序，保护人员和设备免受旋转螺旋桨带来的危险。它的重要性超越了单纯遵守法规；它体现了航空行业对安全的承诺。通过正确理解和实施propeller blocking，航空专业人员为每个人创造了一个更安全的飞行环境。随着我们在技术和知识上的不断进步，安全原则，包括propeller blocking，将始终是航空运营的基石。