propeler bracket

简明释义

尾轴架

英英释义

例句

1.It's crucial to tighten the propeler bracket before each flight to prevent any accidents.

在每次飞行前，务必拧紧螺旋桨支架以防止任何事故。

2.During the inspection, we found that the propeler bracket was corroded and needed immediate attention.

在检查过程中，我们发现螺旋桨支架已腐蚀，需要立即处理。

3.The technician replaced the broken propeler bracket to ensure the aircraft's stability.

技术人员更换了损坏的螺旋桨支架以确保飞机的稳定性。

4.He noticed a vibration in the engine, which was traced back to a loose propeler bracket.

他注意到发动机有振动，追踪后发现是由于松动的螺旋桨支架造成的。

5.The design of the propeler bracket has improved significantly over the years.

多年来，螺旋桨支架的设计有了显著改善。

作文

In the world of engineering and design, the term propeler bracket refers to a crucial component that supports and stabilizes the propeller on various types of vehicles, particularly in aviation and marine applications. The propeler bracket is designed to withstand significant forces and vibrations generated during operation, ensuring that the propeller remains securely attached to the engine or hull. This component is essential for maintaining the efficiency and safety of the vehicle, as any failure in the propeler bracket can lead to catastrophic consequences, including loss of control or structural damage.Understanding the function of the propeler bracket requires a basic knowledge of how propellers work. In simple terms, a propeller converts rotational energy into thrust, allowing vehicles to move through air or water. This process involves complex aerodynamics and hydrodynamics, where the design of the propeller itself plays a significant role in performance. However, without a reliable propeler bracket, even the most advanced propeller designs would be ineffective. The bracket must be engineered to handle the torque and stress that occur during operation, which necessitates careful material selection and structural design.One of the key aspects of the propeler bracket is its ability to absorb vibrations. When a propeller spins, it generates not only thrust but also vibrations that can affect the overall stability of the vehicle. A well-designed propeler bracket will mitigate these vibrations, enhancing the comfort and safety of the ride. Engineers often use materials like aluminum or composite materials to construct these brackets, as they offer a good balance between strength and weight.Moreover, the installation of the propeler bracket must be precise. Any misalignment can lead to uneven wear and tear, resulting in premature failure. Therefore, during the manufacturing process, rigorous quality control measures are implemented to ensure that each propeler bracket meets strict specifications. This attention to detail is vital, as it directly impacts the longevity and reliability of the entire propulsion system.In addition to its mechanical functions, the propeler bracket also serves an aesthetic purpose in some designs. For instance, in high-performance racing boats or aircraft, the bracket may be crafted with sleek lines and finishes that complement the overall look of the vehicle. This blend of functionality and aesthetics showcases the importance of design in modern engineering, where every component, including the propeler bracket, plays a role in the vehicle's performance and appeal.In conclusion, the propeler bracket is more than just a simple support structure; it is a vital component that ensures the safe and efficient operation of vehicles that rely on propellers for movement. Its design and construction involve a deep understanding of engineering principles, as well as an appreciation for the interplay between form and function. As technology continues to advance, the evolution of the propeler bracket will likely follow suit, leading to even more innovative solutions that enhance performance and safety in various applications. Thus, grasping the significance of the propeler bracket is essential for anyone interested in the fields of engineering, aviation, or marine technology.

在工程和设计的世界中，短语propeler bracket指的是一个关键组件，它支持和稳定各种类型车辆上的螺旋桨，特别是在航空和海洋应用中。propeler bracket旨在承受在操作过程中产生的重大力量和振动，确保螺旋桨牢固地固定在发动机或船体上。这个组件对于维护车辆的效率和安全至关重要，因为propeler bracket的任何故障都可能导致灾难性的后果，包括失去控制或结构损坏。理解propeler bracket的功能需要对螺旋桨的工作原理有基本的了解。简单来说，螺旋桨将旋转能量转化为推力，使车辆能够在空气或水中移动。这个过程涉及复杂的空气动力学和水动力学，其中螺旋桨本身的设计在性能中起着重要作用。然而，如果没有可靠的propeler bracket，即使是最先进的螺旋桨设计也将无效。该支架必须经过工程设计，以处理操作过程中发生的扭矩和应力，这需要仔细选择材料和结构设计。propeler bracket的一个关键方面是其吸收振动的能力。当螺旋桨旋转时，它不仅产生推力，还会产生可能影响车辆整体稳定性的振动。设计良好的propeler bracket将减轻这些振动，增强乘坐的舒适性和安全性。工程师通常使用铝或复合材料等材料来制造这些支架，因为它们在强度和重量之间提供了良好的平衡。此外，propeler bracket的安装必须非常精确。任何不对齐都可能导致不均匀磨损，从而导致过早故障。因此，在制造过程中，严格的质量控制措施被实施，以确保每个propeler bracket都符合严格的规格。这种对细节的关注至关重要，因为它直接影响整个推进系统的耐用性和可靠性。除了机械功能外，在某些设计中，propeler bracket也起到美学作用。例如，在高性能赛车艇或飞机中，支架可能设计得流线型，并与车辆的整体外观相辅相成。这种功能与美学的结合展示了现代工程设计的重要性，在这种设计中，每个组件，包括propeler bracket，在车辆的性能和吸引力中都发挥着作用。总之，propeler bracket不仅仅是一个简单的支撑结构；它是一个至关重要的组件，确保依赖螺旋桨进行运动的车辆安全有效地运行。它的设计和构造涉及对工程原理的深刻理解，以及对形式与功能之间相互作用的欣赏。随着技术的不断进步，propeler bracket的演变也可能随之而来，导致更具创新性的解决方案，提升各种应用中的性能和安全性。因此，掌握propeler bracket的重要性对于任何对工程、航空或海洋技术感兴趣的人来说都是必不可少的。