output amplitude

简明释义

输出振幅

英英释义

例句

1.To prevent distortion, the output amplitude should not exceed the maximum level.

为了防止失真，输出幅度不应超过最大水平。

2.The engineer adjusted the circuit to increase the output amplitude of the signal.

工程师调整了电路以增加信号的输出幅度。

3.Adjusting the gain will directly affect the output amplitude of the amplifier.

调整增益将直接影响放大器的输出幅度。

4.The output amplitude of the waveform was measured using an oscilloscope.

波形的输出幅度是使用示波器测量的。

5.Monitoring the output amplitude is crucial for ensuring the quality of audio in a sound system.

监测输出幅度对于确保音响系统音质至关重要。

作文

In the realm of electronics and signal processing, the term output amplitude refers to the maximum value of a signal produced by a system or device. This concept is crucial in various applications, including audio engineering, telecommunications, and instrumentation. Understanding output amplitude can greatly enhance our ability to design and analyze systems that rely on accurate signal transmission and reception.To begin with, let's explore what output amplitude signifies in practical terms. In an audio amplifier, for instance, the output amplitude determines how loud the sound will be when it reaches the speakers. A higher output amplitude means a louder sound, which is essential for ensuring that the audio can be heard clearly in larger spaces. Conversely, if the output amplitude is too low, the sound may be inaudible or distorted, leading to poor audio quality.Moreover, the output amplitude is not only relevant in audio applications but also plays a significant role in communication systems. In telecommunications, the output amplitude of a transmitted signal affects its ability to travel long distances without degradation. Signals with insufficient output amplitude may lose clarity or become unintelligible due to noise interference. Therefore, engineers must carefully evaluate and adjust the output amplitude to ensure effective communication.Another important aspect to consider is the relationship between output amplitude and power consumption. In many devices, particularly battery-operated ones, achieving a high output amplitude often requires more power. This presents a challenge for designers who must balance performance with energy efficiency. For example, in portable audio devices, manufacturers strive to maximize the output amplitude while minimizing battery drain, allowing users to enjoy high-quality sound without frequent recharging.Furthermore, the measurement of output amplitude can be performed using various instruments, such as oscilloscopes and multimeters. These tools help engineers visualize and quantify the output amplitude, enabling them to troubleshoot issues and optimize system performance. By analyzing the output amplitude in different scenarios, engineers can identify potential improvements and innovations in their designs.In conclusion, the concept of output amplitude is integral to the fields of electronics and signal processing. It influences everything from audio quality to communication effectiveness and power consumption. By understanding and manipulating output amplitude, engineers can create systems that not only meet but exceed user expectations. As technology continues to advance, the importance of mastering output amplitude will only grow, making it a key focus area for future innovations in electronic design and signal processing.

在电子和信号处理领域，术语输出幅度指的是由系统或设备产生的信号的最大值。这个概念在各种应用中至关重要，包括音频工程、电信和仪器仪表。理解输出幅度可以大大增强我们设计和分析依赖于准确信号传输和接收的系统的能力。首先，让我们探讨一下输出幅度在实际中的意义。例如，在音频放大器中，输出幅度决定了当声音到达扬声器时的响度。较高的输出幅度意味着声音更响亮，这对于确保音频在较大空间中可以清晰听到是必不可少的。相反，如果输出幅度过低，声音可能会听不见或失真，从而导致音质差。此外，输出幅度不仅与音频应用相关，在通信系统中也发挥着重要作用。在电信中，传输信号的输出幅度影响其在长距离传播时的清晰度。如果信号的输出幅度不足，可能会因噪声干扰而失去清晰度或变得难以理解。因此，工程师必须仔细评估和调整输出幅度以确保有效的通信。另一个需要考虑的重要方面是输出幅度与功耗之间的关系。在许多设备中，尤其是电池供电的设备，达到高输出幅度通常需要更多的电力。这给设计人员带来了挑战，他们必须平衡性能与能效。例如，在便携式音频设备中，制造商努力在最小化电池消耗的同时最大化输出幅度，使用户能够享受高质量的声音，而无需频繁充电。此外，可以使用各种仪器来测量输出幅度，例如示波器和万用表。这些工具帮助工程师可视化和量化输出幅度，使他们能够排除故障并优化系统性能。通过分析不同情况下的输出幅度，工程师可以识别潜在的改进和创新。总之，输出幅度的概念对电子和信号处理领域至关重要。它影响从音频质量到通信有效性以及功耗的各个方面。通过理解和操控输出幅度，工程师可以创建不仅满足而且超越用户期望的系统。随着技术的不断进步，掌握输出幅度的重要性只会增加，使其成为未来电子设计和信号处理创新的关键关注领域。