oarlock block

简明释义

桨叉垫木

英英释义

例句

1.During the race, the team experienced a malfunction with the oarlock block, causing them to lose valuable time.

在比赛中，队伍遇到了oarlock block的故障，导致他们失去了宝贵的时间。

2.The rower adjusted the position of the oarlock block to improve their stroke efficiency.

划手调整了oarlock block的位置，以提高划桨效率。

3.The coach emphasized the importance of checking the oarlock block before each practice session.

教练强调在每次训练前检查oarlock block的重要性。

4.She replaced the old oarlock block with a new one to enhance her boat's performance.

她用新的oarlock block替换了旧的，以增强她的船只性能。

5.Before setting off, make sure the oarlock block is securely fastened to prevent any accidents.

出发前，确保oarlock block牢固固定，以防止任何意外。

作文

In the world of rowing and boating, understanding the various components that contribute to a smooth and efficient experience is essential. One such component is the oarlock block, which plays a crucial role in the functionality of a rowboat. The oarlock block is essentially a device that holds the oars in place, allowing rowers to maneuver through water effectively. This simple yet vital piece of equipment can significantly impact the overall performance of a boat. The design of the oarlock block is quite ingenious. It typically consists of a pivoting mechanism that allows the oar to rotate freely while remaining securely attached to the boat. This feature is particularly important because it enables rowers to apply force to the oars without worrying about them slipping out of place. When properly installed, the oarlock block ensures that the oars remain aligned with the direction of movement, facilitating smoother strokes and better propulsion.Moreover, the materials used in the construction of a oarlock block can vary, ranging from metal to plastic, depending on the type of boat and the conditions in which it will be used. For instance, lightweight materials are often preferred for racing boats to enhance speed, while more durable options may be chosen for recreational vessels that encounter rougher waters. Regardless of the material, the primary function remains the same: to provide stability and control over the oars.Understanding how to properly use and maintain the oarlock block is equally important for any rower. Regular inspections can help identify any wear or damage that might compromise its effectiveness. For example, if the pivoting mechanism becomes rusty or clogged with debris, it may not function smoothly, thus affecting the rowing experience. Consequently, rowers should take the time to clean and lubricate the oarlock block as part of their routine maintenance. This practice not only prolongs the life of the equipment but also enhances safety on the water.In addition to its practical functions, the oarlock block also offers some advantages in terms of design aesthetics. Many modern boats incorporate stylish and sleek oarlock blocks that complement the overall look of the vessel. This attention to detail can make a significant difference, especially for enthusiasts who take pride in their boats. Furthermore, the oarlock block serves as a reminder of the importance of teamwork in rowing. When multiple rowers are working in unison, the efficiency of each stroke is amplified by the proper functioning of all components, including the oarlock block. This collaboration is essential for competitive rowing, where every second counts, and precision is key to achieving victory.In conclusion, the oarlock block is a small but mighty component of rowing that deserves recognition. Its ability to secure the oars, facilitate smooth strokes, and enhance the overall boating experience cannot be overstated. Whether one is a seasoned rower or a beginner, understanding the significance of the oarlock block is fundamental to mastering the art of rowing. As with any sport, knowledge and attention to detail can lead to improved performance and greater enjoyment on the water.

在划船和航海的世界中，理解各种组成部分对于顺利和高效的体验至关重要。其中一个重要组件是桨锁块，它在划艇的功能性中发挥着关键作用。桨锁块本质上是一个固定桨的位置的装置，使划手能够有效地在水中操控。这个简单而重要的设备可以显著影响船只的整体性能。桨锁块的设计非常巧妙。它通常由一个可以转动的机制组成，允许桨自由旋转，同时保持与船的安全连接。这个特点尤其重要，因为它使划手能够对桨施加力量，而不必担心桨会滑出位置。当安装得当时，桨锁块确保桨与运动方向保持一致，从而促进更平滑的划水和更好的推进。此外，桨锁块的制造材料可能有所不同，从金属到塑料，这取决于船的类型和使用条件。例如，轻量化的材料通常被优先选择用于竞赛船，以提高速度，而更耐用的选项可能被选用于遭遇较粗糙水域的休闲船。无论材料如何，其主要功能保持不变：提供桨的稳定性和控制力。了解如何正确使用和维护桨锁块同样对任何划手至关重要。定期检查可以帮助识别任何磨损或损坏，可能会影响其有效性。例如，如果转动机制生锈或被碎屑堵塞，可能无法顺利运作，从而影响划水体验。因此，划手应该花时间清洁和润滑桨锁块，作为他们日常维护的一部分。这种做法不仅延长了设备的使用寿命，还增强了水上的安全性。除了其实用功能外，桨锁块在设计美学方面也提供了一些优势。许多现代船只都采用时尚而流线型的桨锁块，与船只的整体外观相辅相成。这种对细节的关注可以产生显著的差异，尤其是对于那些为自己的船感到自豪的爱好者。此外，桨锁块还提醒我们划船中团队合作的重要性。当多名划手齐心协力时，每一次划水的效率都通过所有组件的正常运作得到增强，包括桨锁块。这种协作在竞争性划船中至关重要，在那里每一秒都至关重要，精确是取得胜利的关键。总之，桨锁块是划船中一个小而强大的组件，值得认可。它固定桨、促进平滑划水和提升整体航行体验的能力不容小觑。无论是经验丰富的划手还是初学者，理解桨锁块的重要性都是掌握划船艺术的基础。正如任何运动一样，知识和对细节的关注可以带来更好的表现和更大的水上乐趣。