normal operating condition

简明释义

正常使用状态正常使用条件正常运转工况

英英释义

例句

1.To maintain normal operating condition, regular maintenance is required.

为了保持正常操作条件，需要定期维护。

2.The machine was tested and confirmed to be functioning under normal operating condition.

机器经过测试，确认在正常操作条件下运行。

3.Engineers must ensure that all systems are within normal operating condition before the launch.

工程师必须确保所有系统在发射前处于正常操作条件。

4.The software update improved performance and brought the application back to normal operating condition.

软件更新改善了性能，使应用程序恢复到正常操作条件。

5.During the inspection, it was noted that the equipment was not in normal operating condition.

在检查中，注意到设备不在正常操作条件下。

作文

In the world of engineering and technology, the term normal operating condition is frequently encountered. It refers to the state in which a system or equipment functions as intended, under typical circumstances without any disruptions or failures. Understanding this concept is crucial for engineers, technicians, and operators, as it serves as a baseline for performance assessment and troubleshooting. When a machine or system operates within its normal operating condition, it ensures reliability, efficiency, and safety. For instance, consider an aircraft engine. When it is functioning under normal operating condition, all systems are performing optimally, and the engine produces the required thrust while consuming fuel efficiently. This is vital not only for the performance of the aircraft but also for the safety of its passengers and crew.However, when conditions deviate from this norm, issues may arise. An example of this could be an increase in temperature or pressure beyond the specified limits. Such deviations can lead to malfunctions, reduced efficiency, or even catastrophic failures. Therefore, monitoring and maintaining systems within their normal operating condition is essential. Engineers often implement various sensors and control systems to ensure that operations remain stable and within the defined parameters.Moreover, the concept of normal operating condition extends beyond just machinery; it applies to various fields including electronics, automotive, and even software systems. In the realm of software, for instance, a program running under normal operating condition means that it processes data correctly, responds to user inputs as expected, and does not encounter errors or crashes. Developers strive to create applications that operate smoothly under these conditions, ensuring a positive user experience.Training personnel to recognize and maintain normal operating condition is also a significant aspect of operational efficiency. Operators must be equipped with the knowledge and skills to identify when systems are deviating from their normal states. This involves understanding the indicators of performance, such as unusual sounds, vibrations, or error messages. By recognizing these signs early, operators can take corrective actions before minor issues escalate into major problems.In conclusion, the term normal operating condition is integral to the effective functioning of systems across various industries. It represents the ideal state where equipment and processes perform optimally, ensuring safety, efficiency, and reliability. Understanding and maintaining this condition is paramount for engineers, operators, and technicians alike. As technology continues to evolve, the importance of adhering to normal operating condition will only grow, highlighting the need for ongoing training and awareness in the workforce. By prioritizing this concept, industries can achieve greater operational success and minimize risks associated with equipment failure.

在工程和技术的世界中，术语正常操作条件经常被提及。它指的是系统或设备在典型情况下按预期运行的状态，没有任何干扰或故障。理解这一概念对工程师、技术人员和操作员至关重要，因为它作为性能评估和故障排除的基线。当机器或系统在其正常操作条件下运行时，确保了可靠性、效率和安全性。例如，考虑一下飞机引擎。当它在正常操作条件下运行时，所有系统都在最佳状态下工作，引擎产生所需的推力，同时高效地消耗燃料。这不仅对飞机的性能至关重要，也关系到乘客和机组人员的安全。然而，当条件偏离这一标准时，可能会出现问题。一个例子是温度或压力超过规定限制的增加。这种偏差可能导致故障、效率降低，甚至灾难性故障。因此，监控和保持系统在其正常操作条件内是至关重要的。工程师通常会实施各种传感器和控制系统，以确保操作保持稳定并在定义的参数范围内。此外，正常操作条件的概念不仅仅适用于机器；它适用于包括电子、汽车甚至软件系统等多个领域。在软件领域，例如，一个在正常操作条件下运行的程序意味着它正确处理数据，按预期响应用户输入，并且不会遇到错误或崩溃。开发人员努力创建在这些条件下平稳运行的应用程序，以确保良好的用户体验。培训人员识别和维护正常操作条件也是运营效率的重要方面。操作员必须具备识别系统何时偏离正常状态的知识和技能。这涉及理解性能指标，例如异常声音、振动或错误消息。通过尽早识别这些迹象，操作员可以在小问题升级为重大问题之前采取纠正措施。总之，术语正常操作条件对于各个行业系统的有效运行至关重要。它代表设备和过程表现最佳的理想状态，确保安全、效率和可靠性。理解和维护这一条件对工程师、操作员和技术人员来说都是至关重要的。随着技术的不断发展，遵循正常操作条件的重要性只会增加，突显出在劳动力中持续培训和意识的必要性。通过优先考虑这一概念，行业可以实现更大的运营成功，并最小化与设备故障相关的风险。