normal clearance

简明释义

正常间隙

英英释义

例句

1.During the inspection, the mechanic noted that the normal clearance between the brake pads and rotor was adequate.

在检查过程中，机械师注意到刹车片与转子之间的正常间隙是足够的。

2.The vehicle's design ensures a normal clearance of 6 inches, which is suitable for urban driving.

该车辆的设计确保了6英寸的正常间隙，适合城市驾驶。

3.The construction site must maintain a normal clearance from power lines to ensure safety.

建筑工地必须保持与电力线的正常间隙以确保安全。

4.In this model, the normal clearance allows for better aerodynamics at high speeds.

在这个模型中，正常间隙在高速行驶时允许更好的空气动力学性能。

5.For optimal performance, the engine requires a normal clearance of oil between the moving parts.

为了最佳性能，发动机在运动部件之间需要有正常间隙的油。

作文

In the world of engineering and manufacturing, the term normal clearance is frequently used to describe the space or gap between two components that allows for proper function and movement. Understanding normal clearance is crucial for ensuring that machines operate efficiently and safely. This concept is particularly important in mechanical systems where parts must fit together without excessive friction or binding. For instance, in automotive engineering, the normal clearance between engine components can significantly affect performance and longevity. If the clearance is too tight, it may lead to overheating and premature wear, while too much clearance can result in decreased efficiency and increased vibrations.To illustrate the importance of normal clearance, consider the assembly of a car engine. Each component, from pistons to crankshafts, has a specified normal clearance that engineers must adhere to. This specification ensures that when the engine heats up during operation, the materials expand without causing interference. Engineers often use precise measurements and tolerances to define these clearances, which are critical in achieving optimal performance. Moreover, normal clearance is not only relevant in automotive applications but also in various fields such as aerospace, construction, and electronics. In aircraft design, for example, the normal clearance between moving parts like flaps and wings must be meticulously calculated to avoid any potential malfunctions during flight. Similarly, in electronics, the normal clearance between circuit board components ensures that there is no short-circuiting or overheating, which could lead to device failure.The concept of normal clearance extends beyond just mechanical systems; it also plays a vital role in safety regulations and standards. Many industries have established guidelines that dictate the acceptable ranges of normal clearance to ensure public safety. For instance, in construction, the normal clearance between structural elements must meet specific codes to prevent collapses and ensure the integrity of buildings. Failure to adhere to these standards can result in catastrophic consequences, highlighting the importance of understanding normal clearance in design and construction processes.In conclusion, the term normal clearance encompasses a fundamental principle in engineering and manufacturing that affects the performance, safety, and reliability of various systems. Whether in automotive, aerospace, construction, or electronics, maintaining the appropriate normal clearance is essential for optimal functionality. As technology advances, the methods for measuring and applying normal clearance will continue to evolve, but its significance will remain a cornerstone of effective engineering practices. Therefore, professionals in these fields must prioritize understanding and implementing normal clearance to ensure their designs meet both performance and safety standards.

在工程和制造的世界中，术语normal clearance常用于描述两个组件之间的空间或间隙，这使得正确的功能和运动成为可能。理解normal clearance对于确保机器高效、安全地运行至关重要。这个概念在机械系统中特别重要，因为部件必须无过度摩擦或卡滞地相互配合。例如，在汽车工程中，发动机组件之间的normal clearance会显著影响性能和耐用性。如果间隙过紧，可能导致过热和过早磨损，而过大的间隙则会导致效率降低和振动增加。为了说明normal clearance的重要性，可以考虑汽车发动机的组装。每个组件，从活塞到曲轴，都有一个指定的normal clearance，工程师必须遵循。这一规范确保当发动机在运行过程中加热时，材料会膨胀而不造成干扰。工程师通常使用精确的测量和公差来定义这些间隙，这对于实现最佳性能至关重要。此外，normal clearance不仅与汽车应用相关，还与航空航天、建筑和电子等多个领域密切相关。在飞机设计中，例如，活动部件（如襟翼和机翼）之间的normal clearance必须经过仔细计算，以避免在飞行过程中发生潜在故障。类似地，在电子产品中，电路板组件之间的normal clearance确保不会短路或过热，这可能导致设备故障。normal clearance的概念不仅限于机械系统；它在安全法规和标准中也发挥着重要作用。许多行业建立了指导方针，规定了可接受的normal clearance范围，以确保公众安全。例如，在建筑中，结构元素之间的normal clearance必须符合特定规范，以防止倒塌并保证建筑物的完整性。不遵守这些标准可能导致灾难性后果，突显了在设计和施工过程中理解normal clearance的重要性。总之，术语normal clearance包含了工程和制造中的一个基本原则，影响着各种系统的性能、安全性和可靠性。无论是在汽车、航空航天、建筑还是电子领域，保持适当的normal clearance对于最佳功能至关重要。随着技术的进步，测量和应用normal clearance的方法将继续发展，但其重要性将始终是有效工程实践的基石。因此，这些领域的专业人士必须优先理解和实施normal clearance，以确保他们的设计符合性能和安全标准。