modification number

简明释义

改型号码

英英释义

例句

1.To ensure compliance, check the modification number against the regulatory requirements.

为确保合规，请根据法规要求检查修改编号。

2.The engineering team must update the modification number after every design change.

工程团队在每次设计更改后必须更新修改编号。

3.The software update includes a new modification number that enhances security features.

这次软件更新包含一个新的修改编号，增强了安全功能。

4.Please refer to the modification number on the document to track changes.

请参考文件上的修改编号以跟踪更改。

5.Each version of the product is identified by its unique modification number.

每个产品版本都由其唯一的修改编号标识。

作文

In the world of engineering and design, precision is key. One term that often comes up in discussions about product development and modifications is modification number. This term refers to a unique identifier assigned to a specific change made to a product or system. Each time a modification is implemented, it is crucial to document it accurately, and the modification number serves as a reference point for engineers, designers, and project managers alike. Understanding the significance of a modification number can greatly enhance communication within teams and ensure that everyone is on the same page regarding changes and updates.When a product is first designed, it undergoes various iterations before reaching its final form. Throughout this process, numerous modifications may be necessary to improve functionality, address issues, or incorporate new technologies. Each of these changes is recorded with a modification number, which allows teams to track the history of alterations made to the original design. For instance, if a team modifies a component to enhance its durability, they will assign a new modification number to this change. This practice not only provides clarity but also helps in maintaining a comprehensive record of all modifications, which can be invaluable for future reference.The importance of modification numbers extends beyond mere documentation. In industries where compliance and safety are paramount, having a clear record of modifications can be critical. For example, in the aerospace sector, any alteration made to an aircraft's design must be meticulously documented, and the corresponding modification number must be referenced during inspections and audits. This ensures that all changes have been evaluated for safety and performance, thereby reducing the risk of potential failures.Moreover, modification numbers facilitate collaboration among different teams. In large organizations, multiple departments may be involved in the development and modification of a product. By using modification numbers, teams can easily communicate about specific changes without confusion. For instance, if the manufacturing team needs to know about a recent design change, they can refer to the relevant modification number to quickly access the details of that modification. This streamlined communication can significantly improve efficiency and reduce errors in the production process.Another aspect to consider is the role of modification numbers in quality assurance. Quality control teams often rely on these identifiers to verify that all modifications meet the required standards. When conducting audits or inspections, they can cross-reference the modification number with the corresponding documentation to ensure that the modification was executed correctly and that it adheres to established protocols. This process helps maintain high-quality standards and fosters a culture of accountability within the organization.In conclusion, the concept of modification number is integral to effective product development and management. It serves as a vital tool for tracking changes, ensuring compliance, facilitating communication, and maintaining quality. As industries continue to evolve and innovate, the importance of accurately documenting modifications through modification numbers will only grow. Therefore, understanding and implementing this practice is essential for anyone involved in the fields of engineering, design, and project management. By doing so, teams can work more cohesively, ensure safety and quality, and ultimately contribute to the successful development of products that meet the needs of consumers and stakeholders alike.

在工程和设计的世界中，精确是关键。一个在产品开发和修改讨论中经常出现的术语是修改编号。这个术语指的是分配给产品或系统所做特定更改的唯一标识符。每当实施修改时，准确记录它至关重要，而修改编号作为工程师、设计师和项目经理的参考点。理解修改编号的重要性可以大大增强团队内部的沟通，并确保每个人在关于更改和更新的问题上达成共识。当一个产品首次设计时，它会经历多个迭代过程，直到达到最终形式。在这个过程中，可能需要进行多次修改，以改善功能、解决问题或整合新技术。每一次这些更改都会被记录下来，并赋予一个新的修改编号，这使得团队能够跟踪对原始设计所做的所有更改的历史。例如，如果一个团队修改了一个组件以增强其耐用性，他们将为这一更改分配一个新的修改编号。这种做法不仅提供了清晰度，还有助于维护所有修改的全面记录，这对于未来的参考是非常宝贵的。修改编号的重要性不仅仅体现在文档记录上。在合规性和安全性至关重要的行业中，拥有明确的修改记录可能是关键。例如，在航空航天行业，对飞机设计所做的任何更改都必须被细致地记录下来，并且在检查和审计中必须引用相应的修改编号。这确保所有更改都经过评估，符合安全和性能标准，从而降低潜在故障的风险。此外，修改编号促进了不同团队之间的协作。在大型组织中，多个部门可能参与产品的开发和修改。通过使用修改编号，团队可以轻松地交流特定的更改，而不会造成混淆。例如，如果制造团队需要了解最近的设计更改，他们可以参考相关的修改编号，快速访问该修改的详细信息。这种简化的沟通可以显著提高效率，减少生产过程中的错误。另一个需要考虑的方面是修改编号在质量保证中的作用。质量控制团队通常依赖这些标识符来验证所有修改是否符合所需标准。在进行审计或检查时，他们可以将修改编号与相应的文档进行交叉引用，以确保修改正确执行，并遵循既定协议。这个过程有助于维持高质量标准，并在组织内培养责任文化。总之，修改编号的概念对有效的产品开发和管理至关重要。它作为跟踪更改、确保合规、促进沟通和维护质量的重要工具。随着各行业的不断发展和创新，准确记录修改的修改编号的重要性只会增加。因此，理解和实施这一实践对于任何参与工程、设计和项目管理领域的人来说都是必不可少的。通过这样做，团队可以更紧密地合作，确保安全和质量，并最终为满足消费者和利益相关者需求的产品成功开发做出贡献。