nameplate rating

简明释义

名牌上的额定值

英英释义

例句

1.Before purchasing a generator, check the nameplate rating to ensure it meets your needs.

在购买发电机之前，请检查额定值以确保它满足您的需求。

2.The nameplate rating of this transformer shows it can handle up to 500 kVA.

这个变压器的额定值显示它可以处理高达500千伏安。

3.Always refer to the nameplate rating when installing electrical equipment.

安装电气设备时，请始终参考额定值。

4.The efficiency of the device is often listed next to its nameplate rating.

设备的效率通常列在其额定值旁边。

5.The motor's nameplate rating indicates its maximum power output.

电机的额定值指示其最大功率输出。

作文

In the world of engineering and manufacturing, the term nameplate rating refers to the specifications that are provided on a nameplate attached to a machine or piece of equipment. This nameplate typically includes essential information such as the model number, manufacturer, power requirements, and performance capabilities. Understanding the nameplate rating is crucial for engineers, technicians, and operators as it provides insights into how the equipment should be used and maintained. The nameplate rating serves as a guideline for the safe and efficient operation of machinery. For instance, when dealing with electric motors, the nameplate rating will indicate the voltage, current, and horsepower of the motor. If an operator uses the motor outside of these specified parameters, it can lead to overheating, reduced efficiency, or even catastrophic failure. Therefore, knowing the nameplate rating is essential for ensuring that the equipment operates within its designed limits. Moreover, the nameplate rating plays a significant role in the selection of equipment for specific applications. Engineers often refer to these ratings when designing systems to ensure compatibility and efficiency. For example, if a factory requires a conveyor belt system, the engineer must consider the nameplate rating of the motors that will drive the system. Selecting motors with appropriate ratings ensures that the conveyor operates smoothly without overloading or damaging the components involved. In addition to performance metrics, the nameplate rating also contains safety information. Many nameplates will include warnings or guidelines regarding the maximum load capacity or operational limits. This information is vital for preventing accidents and ensuring the safety of personnel who work with or around the equipment. Ignoring the nameplate rating can result in severe injuries or equipment damage, making it imperative for all users to familiarize themselves with this critical data. Furthermore, regulatory compliance often hinges on adhering to the information provided on the nameplate rating. Various industries are governed by standards that dictate how equipment should be operated and maintained. By following the specifications outlined on the nameplate, companies can ensure they meet legal requirements and avoid potential fines or shutdowns. For instance, in the energy sector, turbines and generators must operate within their nameplate rating to comply with environmental regulations and efficiency standards. In conclusion, the nameplate rating is more than just a label; it is a critical component in the safe and effective use of machinery and equipment. From guiding operational practices to ensuring safety and compliance, understanding the nameplate rating is paramount for anyone involved in the operation or maintenance of industrial equipment. By paying close attention to this information, professionals can extend the lifespan of their machines, improve efficiency, and maintain a safe working environment.

在工程和制造的世界中，术语nameplate rating指的是附在机器或设备上的铭牌上提供的规格。该铭牌通常包含基本信息，如型号、制造商、电力要求和性能能力。理解nameplate rating对工程师、技术人员和操作员至关重要，因为它提供了有关设备应如何使用和维护的见解。

nameplate rating作为机器安全高效操作的指南。例如，在处理电动机时，nameplate rating将指示电动机的电压、电流和马力。如果操作员在这些规定参数之外使用电动机，则可能导致过热、效率降低甚至灾难性故障。因此，了解nameplate rating对于确保设备在其设计限制内运行至关重要。

此外，nameplate rating在特定应用中选择设备方面也发挥着重要作用。工程师在设计系统时通常会参考这些评级，以确保兼容性和效率。例如，如果工厂需要一个输送带系统，工程师必须考虑将驱动系统的电动机的nameplate rating。选择具有适当评级的电动机可确保输送机平稳运行，而不会超载或损坏相关组件。

除了性能指标外，nameplate rating还包含安全信息。许多铭牌将包括有关最大负载能力或操作限制的警告或指南。这些信息对于防止事故和确保与设备一起工作或在其周围工作的人员的安全至关重要。忽视nameplate rating可能导致严重伤害或设备损坏，因此所有用户都必须熟悉这些关键信息。

此外，合规性往往取决于遵循nameplate rating上提供的信息。各个行业受到标准的约束，这些标准规定了设备应如何操作和维护。通过遵循铭牌上列出的规格，公司可以确保他们满足法律要求，避免潜在的罚款或停工。例如，在能源部门，涡轮机和发电机必须在其nameplate rating范围内运行，以遵守环境法规和效率标准。

总之，nameplate rating不仅仅是标签；它是安全有效使用机器和设备的关键组成部分。从指导操作实践到确保安全和合规，理解nameplate rating对任何参与工业设备操作或维护的人来说都是至关重要的。通过密切关注这些信息，专业人员可以延长机器的使用寿命，提高效率，并维护安全的工作环境。