maximum clearance

简明释义

最大间隙

英英释义

例句

1.Before entering the tunnel, make sure your vehicle meets the maximum clearance requirements.

在进入隧道之前，请确保您的车辆符合最大净空要求。

2.For safety reasons, the maximum clearance under the power lines must not be exceeded.

出于安全原因，电线下方的最大净空不得超过。

3.The specifications indicate that the maximum clearance for this model is 18 inches.

规格说明显示该型号的最大净空为18英寸。

4.The cargo ship needs to know the maximum clearance of the port to avoid any accidents.

货船需要知道港口的最大净空以避免任何事故。

5.The bridge has a maximum clearance of 15 feet, which is important for large trucks to pass through safely.

这座桥的最大净空为15英尺，这对大型卡车安全通过至关重要。

作文

In the field of engineering and construction, the term maximum clearance refers to the highest allowable distance between two structures or objects. This concept is crucial in ensuring safety and functionality in various projects. For instance, when designing bridges, engineers must consider the maximum clearance needed for ships to pass underneath. If the clearance is insufficient, it could lead to catastrophic accidents, damaging both the bridge and the vessels. Moreover, in the realm of transportation, maximum clearance plays a vital role in determining the height of vehicles that can safely navigate under overpasses and tunnels. If a vehicle exceeds this height, it risks colliding with the structure, resulting in severe damage and potential injuries. Therefore, signs indicating the maximum clearance are often placed at strategic locations to inform drivers and prevent such incidents. The importance of adhering to the maximum clearance specifications extends beyond just physical structures. In aviation, for example, the term can also apply to the space required for aircraft to take off and land safely. Airports must maintain certain clearances around runways and taxiways to ensure that planes can operate without risk of collision with obstacles. This aspect of air traffic management is critical for maintaining safety in the skies. From a design perspective, architects and engineers must collaborate closely to determine the appropriate maximum clearance for each project. This involves detailed calculations and considerations of various factors, including the intended use of the space, environmental conditions, and regulatory standards. Failure to account for these elements can lead to costly modifications and delays in project completion. In addition to its technical implications, understanding maximum clearance is essential for compliance with legal regulations. Many jurisdictions have specific codes that dictate the minimum and maximum clearances required for different types of structures. Non-compliance with these codes can result in fines, legal action, and even the demolition of non-compliant structures. As technology advances, new materials and construction techniques are being developed that allow for greater flexibility in achieving the desired maximum clearance. Innovations such as lightweight materials and advanced engineering software enable designers to create structures that meet safety requirements while maximizing usable space. In conclusion, the concept of maximum clearance is integral to various fields, from construction and transportation to aviation and architecture. Its significance cannot be overstated, as it directly impacts safety, efficiency, and regulatory compliance. Understanding and applying the principles of maximum clearance is essential for professionals in these industries to ensure the successful execution of their projects. By prioritizing safety and adhering to established guidelines, engineers and architects can create functional and secure environments for everyone involved.

在工程和建筑领域，术语最大净空指的是两个结构或物体之间允许的最高距离。这个概念在确保各种项目的安全性和功能性方面至关重要。例如，在设计桥梁时，工程师必须考虑船只通过下方所需的最大净空。如果净空不足，可能会导致灾难性的事故，损坏桥梁和船只。此外，在交通运输领域，最大净空在确定车辆能够安全通过立交桥和隧道的高度方面发挥着重要作用。如果一辆车的高度超过了这个限制，就有可能与结构发生碰撞，造成严重损坏和潜在伤害。因此，通常会在战略位置设置指示最大净空的标志，以通知司机并防止此类事件的发生。遵守最大净空规范的重要性不仅限于物理结构。在航空领域，例如，该术语也可以适用于飞机安全起飞和降落所需的空间。机场必须在跑道和滑行道周围保持一定的净空，以确保飞机能够在没有与障碍物碰撞风险的情况下操作。这一航空交通管理的方面对维护空中安全至关重要。从设计的角度来看，建筑师和工程师必须密切合作，以确定每个项目的适当最大净空。这涉及详细的计算和对各种因素的考虑，包括空间的预期用途、环境条件和法规标准。未能考虑这些元素可能导致昂贵的修改和项目完成的延误。除了技术影响之外，理解最大净空对于遵守法律法规也是必不可少的。许多司法管辖区有特定的规范，规定不同类型结构所需的最小和最大净空。不遵守这些规范可能会导致罚款、法律诉讼，甚至是拆除不合规的结构。随着技术的进步，正在开发新的材料和建筑技术，这些技术允许在实现所需的最大净空时具有更大的灵活性。轻质材料和先进的工程软件等创新使设计师能够创建符合安全要求的结构，同时最大化可用空间。总之，最大净空的概念在建筑、交通、航空和建筑等多个领域都是不可或缺的。其重要性不容小觑，因为它直接影响安全性、效率和合规性。理解和应用最大净空的原则对于这些行业的专业人士来说至关重要，以确保他们项目的成功执行。通过优先考虑安全和遵循既定的指导方针，工程师和建筑师可以为所有参与者创造功能性和安全的环境。