maximum allowable tank filling limit

简明释义

最大允许液舱充装数量

英英释义

例句

1.Regulatory agencies often define the maximum allowable tank filling limit 最大允许油箱填充限制 for environmental protection.

监管机构通常会定义最大允许油箱填充限制 最大允许油箱填充限制以保护环境。

2.During the inspection, the technician measured the current level against the maximum allowable tank filling limit 最大允许油箱填充限制.

在检查过程中，技术人员将当前液位与最大允许油箱填充限制 最大允许油箱填充限制进行了比较。

3.Before filling the fuel tank, always check the maximum allowable tank filling limit 最大允许油箱填充限制 to avoid overfilling.

在加油之前，务必检查一下最大允许油箱填充限制 最大允许油箱填充限制，以避免溢出。

4.The safety manual specifies the maximum allowable tank filling limit 最大允许油箱填充限制 for hazardous materials.

安全手册中规定了危险材料的最大允许油箱填充限制 最大允许油箱填充限制。

5.To prevent spills, ensure that the liquid does not exceed the maximum allowable tank filling limit 最大允许油箱填充限制.

为了防止溢出，确保液体不要超过最大允许油箱填充限制 最大允许油箱填充限制。

作文

In the context of industrial operations and safety regulations, understanding the concept of maximum allowable tank filling limit is crucial. This term refers to the highest volume of liquid that can be safely stored in a tank without risking overflow or structural failure. The maximum allowable tank filling limit is determined by various factors, including the tank's design, the properties of the stored liquid, and environmental conditions. For instance, a tank designed to hold chemicals may have a different maximum allowable tank filling limit compared to one used for water storage due to the varying densities and behaviors of these liquids.When tanks are filled beyond their maximum allowable tank filling limit, it can lead to serious consequences. Overflowing tanks can cause spills, which not only pose environmental hazards but also result in significant financial losses for companies. Moreover, exceeding the maximum allowable tank filling limit can compromise the structural integrity of the tank itself, leading to leaks or catastrophic failures. Therefore, it is essential for operators to monitor tank levels closely and adhere strictly to the established limits.Regulatory bodies often set strict guidelines regarding the maximum allowable tank filling limit to ensure safety in industrial practices. These regulations may require regular inspections and maintenance of tanks to ensure they can handle the volumes they are intended to store. Additionally, training for personnel who manage these tanks is vital. They must understand how to calculate the maximum allowable tank filling limit based on the tank's dimensions and the specific properties of the substances being stored.In practice, industries utilize various technologies to help manage the maximum allowable tank filling limit. Automated systems can provide real-time monitoring of tank levels, alerting operators when they approach the limit. This proactive approach not only enhances safety but also improves operational efficiency by preventing overfilling incidents before they occur.Furthermore, businesses must develop emergency response plans that address potential overflow scenarios. Such plans should include measures to contain spills and mitigate environmental damage. By preparing for worst-case scenarios, companies can protect both their assets and the surrounding environment.In conclusion, the maximum allowable tank filling limit is a critical aspect of safe tank management in various industries. Understanding this concept helps prevent accidents and ensures compliance with safety regulations. By adhering to the maximum allowable tank filling limit, industries can operate more safely and sustainably, ultimately benefiting both their bottom line and the environment. As we move forward, continuous education and advancements in technology will play a pivotal role in maintaining safe practices regarding tank storage and management.

在工业操作和安全法规的背景下，理解“最大允许罐装限度”的概念至关重要。这个术语指的是可以安全存储在罐中的液体最高体积，而不冒溢出或结构失效的风险。“最大允许罐装限度”由多个因素决定，包括罐的设计、所存储液体的性质以及环境条件。例如，设计用于存储化学品的罐可能与用于水存储的罐具有不同的“最大允许罐装限度”，因为这些液体的密度和行为各不相同。当罐装超出其“最大允许罐装限度”时，可能会导致严重后果。溢出的罐可能会造成泄漏，这不仅对环境构成危害，还会给公司带来重大经济损失。此外，超过“最大允许罐装限度”可能会影响罐本身的结构完整性，导致泄漏或灾难性故障。因此，操作人员必须密切监控罐的液位，并严格遵守既定的限制。监管机构通常会设定严格的关于“最大允许罐装限度”的指南，以确保工业实践的安全。这些规定可能要求定期检查和维护罐，以确保它们能够处理预定存储的体积。此外，管理这些罐的人员培训至关重要。他们必须了解如何根据罐的尺寸和所存储物质的特性计算“最大允许罐装限度”。在实践中，行业利用各种技术来帮助管理“最大允许罐装限度”。自动化系统可以实时监控罐的液位，当接近限度时提醒操作人员。这种主动的方法不仅增强了安全性，还通过防止溢出事件的发生提高了操作效率。此外，企业必须制定应急响应计划，以应对潜在的溢出场景。这些计划应包括控制泄漏和减轻环境损害的措施。通过为最坏的情况做好准备，公司可以保护自身资产和周围环境。总之，“最大允许罐装限度”是各行业安全罐管理的关键方面。理解这一概念有助于防止事故并确保遵守安全法规。通过遵循“最大允许罐装限度”，行业能够更安全、更可持续地运营，最终使其盈利和环境受益。随着我们向前发展，持续的教育和技术进步将在保持安全的罐存储和管理实践中发挥关键作用。