lube point

简明释义

光点

英英释义

例句

1.He used a special tool to access the hard-to-reach lube point.

他使用了一个特殊工具来接触难以到达的润滑点。

2.During maintenance, we will apply grease to all the lube points.

在维护期间，我们会对所有润滑点涂抹油脂。

3.Make sure to check the lube point before starting the machinery.

在启动机器之前，请务必检查一下润滑点。

4.The manual specifies that you should lubricate each lube point every 500 hours of operation.

手册规定您每运行500小时应润滑每个润滑点。

5.Neglecting the lube point can lead to equipment failure.

忽视润滑点可能导致设备故障。

作文

In the world of machinery and equipment, maintenance is a crucial aspect that cannot be overlooked. One important term that often comes up in discussions about maintenance is lube point. A lube point refers to specific locations on a machine where lubricants are applied to reduce friction between moving parts. Proper lubrication is essential for ensuring the longevity and efficiency of machinery, as it helps to prevent wear and tear, overheating, and ultimately, failures that can lead to costly repairs or replacements.Understanding the significance of lube points is vital for anyone involved in the operation or maintenance of mechanical systems. Each lube point is strategically placed to maximize the effectiveness of lubrication. For example, in an industrial conveyor system, there may be multiple lube points along the rollers and bearings. By regularly applying lubricant at these points, operators can ensure smooth operation and extend the life of the equipment.The process of maintaining lube points involves not only the application of lubricant but also understanding the type of lubricant required for each specific application. Different machines may require different types of lubricants based on their operating conditions, such as temperature, load, and speed. For instance, a high-speed motor might need a lightweight oil, while heavy machinery may require a thicker grease to withstand higher loads.Regular inspections of lube points are also critical. Maintenance personnel should check for any signs of leakage, contamination, or blockages that could impede the flow of lubricant. Neglecting these checks can lead to serious issues, such as increased friction, which can cause overheating and damage to the machine components. By proactively managing lube points, organizations can significantly reduce downtime and maintenance costs.Moreover, training employees on the importance of lube points and proper lubrication techniques can enhance overall safety and efficiency in the workplace. When workers understand how to properly maintain lube points, they are better equipped to identify potential problems before they escalate into major failures. This knowledge not only contributes to the reliability of equipment but also fosters a culture of safety and responsibility among the workforce.In conclusion, the concept of lube points is integral to the maintenance of machinery and equipment. By recognizing the importance of these specific locations for lubrication, operators and maintenance personnel can ensure the smooth functioning and longevity of their machines. Regular attention to lube points, combined with proper training and inspection practices, will lead to improved operational efficiency and reduced costs in the long run. Therefore, investing time and resources into understanding and managing lube points is a wise decision for any organization that relies on machinery for its operations.

在机械和设备的世界中，维护是一个不可忽视的关键方面。一个常常出现在维护讨论中的重要术语是润滑点。润滑点指的是机器上涂抹润滑剂以减少运动部件之间摩擦的特定位置。适当的润滑对于确保机械的耐用性和效率至关重要，因为它有助于防止磨损、过热，以及最终导致昂贵维修或更换的故障。理解润滑点的重要性对任何参与机械系统操作或维护的人来说都是至关重要的。每个润滑点都被战略性地放置，以最大化润滑的有效性。例如，在工业输送系统中，可能在滚筒和轴承上有多个润滑点。通过定期在这些点上施加润滑剂，操作员可以确保设备的平稳运行并延长其使用寿命。维护润滑点的过程不仅涉及润滑剂的施加，还涉及了解每种特定应用所需的润滑剂类型。不同的机器可能根据其操作条件（如温度、负载和速度）需要不同类型的润滑剂。例如，高速电动机可能需要轻质油，而重型机械可能需要较厚的润滑脂以承受更高的负载。定期检查润滑点也至关重要。维护人员应检查是否有泄漏、污染或阻塞等迹象，这些问题可能会妨碍润滑剂的流动。忽视这些检查可能会导致严重问题，例如摩擦增加，可能导致过热和机器部件损坏。通过主动管理润滑点，组织可以显著减少停机时间和维护成本。此外，对员工进行润滑点及正确润滑技术的重要性培训，可以提高工作场所的整体安全性和效率。当工人了解如何正确维护润滑点时，他们更有能力在问题升级为重大故障之前识别潜在问题。这种知识不仅有助于设备的可靠性，还在员工中培养了安全和责任的文化。总之，润滑点的概念对于机械和设备的维护至关重要。通过认识到这些特定润滑位置的重要性，操作员和维护人员可以确保其机器的顺利运行和长久使用。定期关注润滑点，结合适当的培训和检查实践，将在长期内提高操作效率并降低成本。因此，投入时间和资源来理解和管理润滑点是任何依赖机械进行运营的组织明智的决定。