loading limit

简明释义

负载极限

英英释义

例句

1.If you exceed the loading limit 载重限制, it could damage the vehicle.

如果你超过了loading limit 载重限制，可能会损坏车辆。

2.The bridge has a strict loading limit 载重限制 to ensure safety for all vehicles.

这座桥有严格的loading limit 载重限制，以确保所有车辆的安全。

3.Always check the loading limit 载重限制 before loading cargo onto the ship.

在将货物装上船之前，请务必检查loading limit 载重限制。

4.The truck exceeded its loading limit 载重限制 and was pulled over by the police.

这辆卡车超过了它的loading limit 载重限制，因此被警察拦下。

5.The manufacturer states that the loading limit 载重限制 of this elevator is 1000 kg.

制造商声明该电梯的loading limit 载重限制为1000公斤。

作文

Understanding the concept of loading limit is crucial in various fields, especially in engineering and transportation. The term loading limit refers to the maximum weight or load that a structure, vehicle, or equipment can safely support without risking failure or damage. This concept is not only important for the safety of the users but also for the longevity and durability of the structures and vehicles involved.In construction, for instance, every building has a defined loading limit that must be adhered to during its design and use. Engineers calculate this limit based on various factors including materials used, architectural design, and environmental conditions. Exceeding the loading limit of a building can lead to catastrophic failures, such as collapses or severe structural damage, which can endanger lives and result in significant financial losses.Similarly, in the realm of transportation, vehicles have specific loading limits that dictate how much cargo they can carry. Trucks, for example, are designed with a certain loading limit to ensure they can operate safely on roads without causing damage to the vehicle itself or the infrastructure. If a truck exceeds its loading limit, it can lead to tire blowouts, brake failures, or even accidents due to loss of control. Therefore, understanding and respecting these limits is essential for safe transportation practices.In addition to construction and transportation, the concept of loading limit also applies to various types of equipment, such as cranes and lifts. Each piece of machinery comes with its own loading limit specifications that must be followed to prevent accidents. For example, if a crane exceeds its loading limit, it may tip over or drop its load, which could result in injury or fatalities. Operators must be trained to understand these limits and ensure they are never exceeded during operation.Moreover, the loading limit is not just a static figure; it can change based on different conditions. Factors such as weather, wear and tear, and even how the load is distributed can affect the effective loading limit. For instance, a truck may be able to carry a heavier load in dry conditions compared to wet or icy roads. Therefore, it is essential to continuously assess the conditions and adjust operations accordingly to maintain safety.In conclusion, the concept of loading limit is integral to ensuring safety in construction, transportation, and equipment operation. It encompasses a range of factors and requires careful consideration and adherence to avoid potential hazards. Understanding and respecting loading limits not only protects individuals and property but also contributes to the overall efficiency and effectiveness of operations across various industries. As we continue to innovate and develop new technologies, the importance of adhering to loading limits will remain a fundamental principle in promoting safety and reliability in our infrastructures and systems.

理解加载限制的概念在各个领域都是至关重要的，尤其是在工程和运输方面。术语加载限制指的是结构、车辆或设备可以安全承载的最大重量或负荷，超出这个限制可能会导致故障或损坏。这个概念不仅对用户的安全至关重要，而且对相关结构和车辆的耐用性和持久性也至关重要。例如，在建筑中，每个建筑都有一个明确的加载限制，在设计和使用过程中必须遵守。工程师根据使用的材料、建筑设计和环境条件等各种因素来计算这个限制。超过建筑的加载限制可能会导致灾难性的故障，例如倒塌或严重的结构损坏，这可能危及生命并导致重大财务损失。同样，在运输领域，车辆有特定的加载限制，决定了它们可以携带多少货物。例如，卡车的设计有一定的加载限制，以确保它们能够安全地在道路上行驶，而不会对车辆本身或基础设施造成损害。如果卡车超过其加载限制，可能会导致轮胎爆胎、刹车失灵，甚至因失去控制而发生事故。因此，理解和尊重这些限制对于安全的运输实践至关重要。除了建筑和运输，加载限制的概念还适用于各种类型的设备，如起重机和升降机。每种机械都有其自身的加载限制规格，必须遵循以防止事故发生。例如，如果起重机超过其加载限制，可能会倾覆或掉落负载，从而导致伤亡。操作人员必须接受培训，以了解这些限制，并确保在操作过程中绝不超过。此外，加载限制并不是一个静态的数字；它可能会根据不同的条件而变化。天气、磨损，甚至负载的分配方式等因素都可能影响有效的加载限制。例如，在干燥条件下，卡车可能能够承载更重的负载，而在潮湿或结冰的道路上则不然。因此，持续评估条件并相应调整操作以保持安全是至关重要的。总之，加载限制的概念对于确保建筑、运输和设备操作的安全至关重要。它涵盖了一系列因素，需要仔细考虑和遵守，以避免潜在的危险。理解和尊重加载限制不仅保护个人和财产，还促进了各行业运营的整体效率和有效性。随着我们继续创新和开发新技术，遵守加载限制的重要性将始终是促进基础设施和系统安全与可靠性的基本原则。