load-line draft

简明释义

载重水线吃水

英英释义

例句

1.During the inspection, the surveyor noted the load-line draft for compliance with maritime regulations.

在检查过程中，检查员记录了吃水线草图以确保符合海事法规。

2.The load-line draft indicates how much cargo can be safely loaded onto the ship.

该吃水线草图指示可以安全装载到船上的货物量。

3.The captain checked the load-line draft to ensure the vessel was within safe limits.

船长检查了吃水线草图以确保船只在安全限度内。

4.The load-line draft is crucial for maintaining the stability of the ship at sea.

保持船只在海上稳定的关键是吃水线草图。

5.To avoid overloading, the crew must refer to the load-line draft before departure.

为避免超载，船员在出发前必须参考吃水线草图。

作文

The concept of a load-line draft is crucial in the maritime industry, particularly when it comes to ensuring the safety and stability of vessels at sea. The load-line draft refers to the depth to which a ship is submerged in water when it is loaded to its maximum capacity. This measurement is essential for determining whether a vessel is overloaded or if it is operating within safe limits. Understanding the load-line draft allows shipowners, captains, and crew members to make informed decisions about cargo loading and distribution.In essence, the load-line draft is marked on the hull of a ship, usually near the stern, indicating the maximum allowable immersion level for different water types, such as freshwater or seawater. These markings are regulated by international maritime laws and vary according to the ship's design and intended use. For instance, a cargo ship may have a different load-line draft compared to a passenger liner due to their distinct operational requirements.When a ship is loaded, the weight of the cargo affects its buoyancy and stability. If the load-line draft exceeds the marked limit, the vessel may face severe risks, including capsizing or taking on water. Therefore, it is vital for the crew to regularly monitor the load-line draft during loading operations. By doing so, they can ensure that the ship remains within its safe operating parameters, thus safeguarding both the vessel and its crew.Moreover, understanding the implications of the load-line draft extends beyond immediate safety concerns. It also has economic ramifications. Overloading a ship can lead to increased fuel consumption, higher operational costs, and potential fines from maritime authorities. Therefore, accurate knowledge of the load-line draft not only protects lives but also enhances the financial efficiency of shipping operations.In conclusion, the load-line draft is more than just a technical term; it represents a fundamental aspect of maritime safety and operational efficiency. By comprehending its significance, those involved in the shipping industry can better navigate the complexities of maritime regulations and ensure that their vessels operate safely and economically. As the maritime world continues to evolve, the importance of adhering to load-line draft regulations will remain a cornerstone of responsible shipping practices.

“载重线吃水”这一概念在海事行业中至关重要，特别是在确保船舶在海上安全和稳定方面。“载重线吃水”是指船舶在装载到最大容量时，沉入水中的深度。这个测量对于确定船舶是否超载或是否在安全限制内操作至关重要。理解“载重线吃水”使船东、船长和船员能够对货物的装载和分配做出明智的决策。从本质上讲，“载重线吃水”标记在船体上，通常位于船尾附近，指示不同水域类型（如淡水或海水）的最大允许浸入水平。这些标记受到国际海事法的监管，并根据船舶的设计和预期用途而有所不同。例如，一艘货船的“载重线吃水”可能与一艘客轮不同，因为它们的操作要求各异。当船舶装载时，货物的重量会影响其浮力和稳定性。如果“载重线吃水”超过标记限制，船舶可能面临严重风险，包括倾覆或进水。因此，船员在装载作业期间定期监测“载重线吃水”至关重要。通过这样做，他们可以确保船舶保持在安全操作参数内，从而保护船舶及其船员。此外，理解“载重线吃水”的影响不仅限于直接的安全问题。它还有经济影响。超载船舶可能导致燃料消耗增加、运营成本上升以及可能遭受海事当局的罚款。因此，准确了解“载重线吃水”不仅保护生命，还提高了航运操作的财务效率。总之，“载重线吃水”不仅仅是一个技术术语；它代表了海事安全和运营效率的基本方面。通过理解其重要性，参与航运行业的人士可以更好地应对海事法规的复杂性，确保他们的船舶安全和经济地运营。随着海事世界的不断发展，遵守“载重线吃水”规定的重要性将始终是负责任的航运实践的基石。