length between draft marks

简明释义

吃水标志间船长

英英释义

例句

1.It's crucial to check the length between draft marks before departure to avoid overloading.

在出发前检查吃水线间距至关重要，以避免超载。

2.The captain noted that the length between draft marks indicated a significant weight increase.

船长注意到吃水线间距显示出显著的重量增加。

3.The engineer measured the length between draft marks to ensure the vessel was properly loaded.

工程师测量了吃水线间距以确保船只装载正确。

4.Adjusting the cargo can help maintain the ideal length between draft marks for stability.

调整货物可以帮助保持理想的吃水线间距以确保稳定性。

5.The surveyor reported that the length between draft marks was within acceptable limits.

测量员报告说，吃水线间距在可接受范围内。

作文

In the world of engineering and design, precision is key. One important measurement that professionals often refer to is the length between draft marks. This term is particularly relevant in fields such as naval architecture and shipbuilding, where it denotes the distance measured between two specific points on a vessel's hull. Understanding this measurement can greatly influence the design and functionality of a ship. The length between draft marks helps engineers determine how much water a ship will displace, which is crucial for ensuring stability and buoyancy during its operation.When a ship is designed, it is essential to know how it will perform under various conditions, including different loads and sea states. The length between draft marks serves as a reference point for calculating the vessel's draft, which is the vertical distance between the waterline and the bottom of the hull (keel). This measurement is vital for assessing the ship's capacity and operational limits. For instance, if a ship is loaded beyond its intended capacity, it could lead to safety hazards or even capsizing.Moreover, the length between draft marks is used to monitor the ship's performance over time. By regularly measuring the draft at various stages of a voyage, crew members can ensure that the vessel remains within safe operating parameters. This practice is especially important during loading and unloading processes, where the distribution of weight can significantly affect the ship's balance and stability.In addition to its practical applications, the length between draft marks also plays a role in regulatory compliance. Various maritime organizations set guidelines regarding the maximum draft allowed for different types of vessels. By adhering to these regulations, shipbuilders and operators can avoid penalties and ensure that their ships are seaworthy.Furthermore, the length between draft marks can vary based on the design and purpose of the vessel. For example, cargo ships may have a different draft compared to passenger ferries or fishing boats, reflecting their unique operational requirements. This variability highlights the importance of customizing designs to meet specific needs while maintaining safety and efficiency.In conclusion, the length between draft marks is a critical measurement in the maritime industry that influences ship design, safety, and regulatory compliance. By understanding and accurately measuring this distance, engineers and operators can enhance the performance and reliability of vessels, ultimately contributing to safer and more efficient maritime operations. As the industry continues to evolve, the significance of this measurement will undoubtedly remain paramount in ensuring that ships can navigate the waters safely and effectively.

在工程和设计的世界中，精确性是关键。专业人士经常提到的一个重要测量是草图标记之间的长度。这个术语在海洋建筑和造船等领域尤为相关，它表示在船体上两个特定点之间的距离。理解这一测量可以极大地影响船只的设计和功能。草图标记之间的长度帮助工程师确定船只将排开多少水，这对确保船只在操作过程中的稳定性和浮力至关重要。当一艘船被设计时，了解它在不同条件下的表现，包括不同的负载和海况，是必不可少的。草图标记之间的长度作为计算船只吃水（即水线与船体底部（龙骨）之间的垂直距离）的参考点。这一测量对于评估船只的容量和操作限制至关重要。例如，如果一艘船的装载超过其预期容量，可能会导致安全隐患甚至翻船。此外，草图标记之间的长度用于监测船只随时间的表现。通过在航程的各个阶段定期测量吃水，船员可以确保船只保持在安全操作参数内。这一做法在装载和卸载过程中尤其重要，因为重量的分布会显著影响船只的平衡和稳定性。除了实际应用外，草图标记之间的长度在合规性方面也发挥着作用。各种海事组织设定了关于不同类型船只允许的最大吃水的指导方针。通过遵守这些规定，造船商和运营商可以避免处罚，并确保他们的船只适航。此外，草图标记之间的长度可能会根据船只的设计和用途而有所不同。例如，货船的吃水可能与客运渡轮或渔船不同，反映了它们独特的操作要求。这种可变性突显了根据特定需求定制设计的重要性，同时保持安全性和效率。总之，草图标记之间的长度是海事行业中的一个关键测量，它影响着船只的设计、安全性和合规性。通过理解和准确测量这一距离，工程师和运营商可以提高船只的性能和可靠性，最终有助于更安全、更高效的海上操作。随着行业的不断发展，这一测量的重要性无疑将在确保船只能够安全有效地航行于水域方面保持首要地位。