lamp load

简明释义

电灯负载

英英释义

例句

1.To avoid overheating, keep the lamp load within recommended limits.

为了避免过热，请保持灯负载在推荐限制内。

2.A high lamp load can cause circuit breakers to trip frequently.

高灯负载可能导致断路器频繁跳闸。

3.When adding new fixtures, it's important to recalculate the lamp load for safety.

在添加新灯具时，重新计算灯负载是很重要的，以确保安全。

4.The maximum lamp load for this outlet is 1800 watts.

这个插座的最大灯负载是1800瓦。

5.The electrician measured the lamp load to ensure the circuit could handle the total wattage.

电工测量了灯负载以确保电路能够承受总瓦数。

作文

In the realm of electrical engineering, the term lamp load refers to the total electrical load that is consumed by lighting fixtures within a circuit. Understanding this concept is crucial for engineers and electricians alike, as it plays a significant role in designing electrical systems that are both efficient and safe. When planning an electrical installation, one must take into account the lamp load to ensure that the circuit can handle the total wattage of all connected lighting devices without overheating or tripping breakers. The lamp load is typically calculated by adding up the wattages of all lamps and fixtures that will be used in a particular area. For instance, if a room contains five light bulbs rated at 60 watts each, the total lamp load would be 300 watts. This information is vital when selecting circuit breakers and wiring, as it helps determine the appropriate gauge of wire needed to safely carry the electrical current. Moreover, understanding the lamp load is essential for energy efficiency. In a commercial setting, where multiple lighting systems may be in use, knowing the total lamp load allows for better management of energy consumption. By using energy-efficient bulbs, such as LEDs, one can significantly reduce the lamp load, thereby lowering electricity bills and minimizing the environmental impact. In addition to its importance in energy management, the lamp load also affects the overall ambiance and functionality of a space. Properly calculating the lamp load ensures that there is adequate lighting for tasks while also creating a comfortable atmosphere. For example, in a restaurant, the lighting should be bright enough for patrons to read the menu but soft enough to create a cozy environment. Furthermore, when designing lighting systems, it is important to consider the lamp load in relation to other electrical loads on the same circuit. If the total load exceeds the capacity of the circuit, it could lead to circuit overloads and potential hazards. Therefore, engineers must balance the lamp load with other devices on the circuit, such as fans or appliances, to maintain safety and functionality. In conclusion, the concept of lamp load is integral to the field of electrical engineering, influencing everything from circuit design to energy efficiency and ambiance. By thoroughly understanding and calculating the lamp load, professionals can create safer, more efficient, and aesthetically pleasing environments. Whether in residential or commercial applications, the implications of lamp load extend far beyond mere numbers; they shape the way we experience light in our daily lives.

在电气工程领域，术语lamp load指的是电路中照明设备所消耗的总电负荷。理解这一概念对工程师和电工来说至关重要，因为它在设计高效且安全的电气系统中发挥着重要作用。当规划电气安装时，必须考虑lamp load以确保电路能够承载所有连接照明设备的总瓦数，而不会过热或跳闸。lamp load通常通过将特定区域内所有灯具和灯泡的瓦数相加来计算。例如，如果一个房间内有五个额定为60瓦的灯泡，则总lamp load为300瓦。这些信息对于选择断路器和电线非常重要，因为它有助于确定安全传输电流所需的适当电线规格。此外，理解lamp load对于能源效率也至关重要。在商业环境中，当多个照明系统同时使用时，了解总lamp load可以更好地管理能源消耗。通过使用节能灯泡，如LED灯，可以显著减少lamp load，从而降低电费并最小化对环境的影响。除了在能源管理中的重要性外，lamp load还影响空间的整体氛围和功能。正确计算lamp load可以确保任务有足够的照明，同时也创造出舒适的氛围。例如，在餐厅中，照明应足够明亮，以便顾客阅读菜单，但又要柔和，以营造温馨的环境。此外，在设计照明系统时，考虑lamp load与同一电路上其他电负荷的关系也很重要。如果总负荷超过电路的容量，可能会导致电路过载和潜在的危险。因此，工程师必须平衡lamp load与电路上的其他设备，如风扇或电器，以保持安全性和功能性。总之，lamp load的概念是电气工程领域不可或缺的一部分，影响着从电路设计到能源效率和氛围的方方面面。通过彻底理解和计算lamp load，专业人士可以创造出更安全、更高效和美观的环境。无论是在住宅还是商业应用中，lamp load的影响远不止数字；它们塑造了我们在日常生活中体验光线的方式。