length on load waterline

简明释义

载重水线长度

英英释义

例句

1.During the inspection, the surveyor checked the length on load waterline (装载水线长度) to ensure compliance with regulations.

在检查过程中，检验员检查了装载水线长度以确保符合规定。

2.For accurate performance predictions, the length on load waterline (装载水线长度) should be considered.

为了准确的性能预测，应考虑装载水线长度。

3.A longer length on load waterline (装载水线长度) can improve a ship's speed and efficiency.

较长的装载水线长度可以提高船舶的速度和效率。

4.The design of the vessel must ensure that the length on load waterline (装载水线长度) is properly calculated to maintain stability.

船只的设计必须确保正确计算装载水线长度以保持稳定性。

5.The shipbuilder provided documentation detailing the length on load waterline (装载水线长度) measurements.

造船商提供了详细的文档，说明了装载水线长度的测量结果。

作文

The concept of the length on load waterline is crucial in the field of naval architecture and marine engineering. It refers to the length of a vessel measured at the waterline when it is loaded to its maximum capacity. This measurement is significant because it affects various aspects of a ship's performance, including its stability, speed, and fuel efficiency. Understanding the length on load waterline helps engineers design ships that can perform optimally under different loading conditions.When a ship is designed, the length on load waterline is one of the key parameters that must be considered. It directly influences the hydrodynamic characteristics of the vessel. A longer waterline generally allows for better speed and efficiency, as it reduces resistance in the water. Conversely, if the length on load waterline is too short, the ship may experience increased drag, leading to higher fuel consumption and slower speeds.Moreover, the length on load waterline plays a vital role in determining the ship's stability. A vessel that is loaded properly will have its center of gravity and buoyancy aligned favorably, allowing it to remain upright and balanced. If the loading is uneven or exceeds the recommended limits, the length on load waterline could change, potentially leading to capsizing or other dangerous situations. Therefore, understanding how to calculate and maintain the correct length on load waterline is essential for safe maritime operations.In practice, the length on load waterline is often used in conjunction with other measurements, such as the beam (width) and draft (depth) of the vessel. Together, these dimensions help create a complete picture of the ship's design and operational capabilities. For instance, a ship with a long length on load waterline and a wide beam may be more stable in rough seas compared to a narrower vessel. Engineers must carefully balance these factors to ensure that the ship can handle various sea conditions while carrying its intended cargo.Additionally, the length on load waterline has regulatory implications. Maritime authorities often set specific standards for vessels based on their length on load waterline. These regulations help ensure safety and environmental protection by limiting the size and capacity of ships operating in certain waters. Compliance with these standards is critical for shipowners and operators, as violations can result in hefty fines and operational restrictions.In conclusion, the length on load waterline is a fundamental aspect of ship design that impacts performance, stability, and regulatory compliance. A comprehensive understanding of this measurement enables naval architects and marine engineers to create vessels that are not only efficient but also safe for navigation. As the maritime industry continues to evolve, the importance of accurately assessing the length on load waterline will remain paramount, ensuring that ships can meet the demands of modern trade and transportation while adhering to safety standards.

“载重水线长度”这一概念在海洋建筑和海洋工程领域至关重要。它指的是船只在最大载荷情况下，水线测量的长度。这个测量非常重要，因为它影响着船舶性能的各个方面，包括稳定性、速度和燃油效率。理解“载重水线长度”有助于工程师设计在不同载荷条件下能实现最佳性能的船舶。在船舶设计时，“载重水线长度”是必须考虑的关键参数之一。它直接影响船舶的水动力特性。较长的水线通常允许更好的速度和效率，因为它减少了水中的阻力。相反，如果“载重水线长度”过短，船舶可能会经历更大的拖曳，从而导致更高的燃料消耗和更慢的速度。此外，“载重水线长度”在确定船舶的稳定性方面也起着至关重要的作用。正确加载的船舶将使其重心和浮力对齐，有利于保持直立和平衡。如果装载不均或超过推荐限制，“载重水线长度”可能会发生变化，可能导致倾覆或其他危险情况。因此，理解如何计算和保持正确的“载重水线长度”对安全的海上操作至关重要。在实际应用中，“载重水线长度”通常与其他测量值结合使用，例如船的宽度（横梁）和深度（吃水）。这些尺寸一起帮助创建船舶设计和操作能力的完整图像。例如，一艘具有较长“载重水线长度”和较宽横梁的船舶在恶劣海况下可能比狭窄的船舶更稳定。工程师必须仔细平衡这些因素，以确保船舶能够在运输预定货物的同时应对各种海况。此外，“载重水线长度”还有监管意义。海事当局通常根据船舶的“载重水线长度”设定具体标准。这些规定通过限制在某些水域运营的船舶的大小和容量，帮助确保安全和环境保护。遵守这些标准对船东和运营者至关重要，因为违规可能导致巨额罚款和运营限制。总之，“载重水线长度”是船舶设计的基本方面，影响性能、稳定性和合规性。全面理解这一测量使海洋建筑师和海洋工程师能够创造出不仅高效且安全的航行船舶。随着海洋产业的不断发展，准确评估“载重水线长度”的重要性将始终存在，确保船舶能够满足现代贸易和运输的需求，同时遵循安全标准。