inclined member

简明释义

倾斜构件

英英释义

例句

1.During the inspection, the team noticed that the inclined member showed signs of wear and needed reinforcement.

在检查过程中，团队注意到倾斜构件出现了磨损迹象，需要加固。

2.In the bridge construction, the inclined member helps distribute the weight evenly across the span.

在桥梁建设中，倾斜构件有助于将重量均匀分布到整个跨度上。

3.The architect specified an inclined member to enhance the aesthetic appeal of the building.

建筑师指定了一个倾斜构件以增强建筑的美学吸引力。

4.The use of an inclined member in the design allowed for a more efficient load transfer.

设计中使用倾斜构件使得载荷转移更加高效。

5.The engineer designed a structure that included an inclined member to provide additional support during heavy winds.

工程师设计了一个结构，其中包括一个倾斜构件以在强风中提供额外支持。

作文

In the world of engineering and architecture, the term inclined member refers to a structural element that is not positioned vertically or horizontally but is instead set at an angle. This concept plays a crucial role in the design and stability of various structures, such as bridges, roofs, and towers. Understanding how inclined members function can greatly enhance our appreciation for the intricacies of modern construction and the principles of physics that govern it.When engineers design a structure, they must consider the forces acting upon it, including gravity, wind, and other environmental factors. An inclined member can help distribute these forces more effectively than a vertical or horizontal member alone. For example, in a truss system, the use of inclined members allows for the transfer of loads from one part of the structure to another, thereby increasing its overall strength and stability.One common application of inclined members is in the construction of roofs. Sloped roofs are designed to allow rainwater to drain off easily, preventing water accumulation that could lead to structural damage. The rafters that support these roofs are often inclined members, angled to provide both aesthetic appeal and functional benefits. By using inclined members, architects can create visually striking designs while ensuring that the building remains safe and durable.Moreover, inclined members are also essential in bridge construction. Many bridges employ a combination of horizontal beams and inclined members to maintain balance and support heavy loads. The inclined members act like tension cables, pulling down on the bridge deck and distributing weight evenly across the structure. This design not only enhances the load-bearing capacity of the bridge but also allows for longer spans without the need for additional support columns.In addition to their structural advantages, inclined members can also contribute to the aesthetic qualities of a building or structure. Architects often use these elements to create dynamic shapes and lines that draw the eye and provide visual interest. The interplay between vertical, horizontal, and inclined members can lead to innovative designs that push the boundaries of traditional architecture.However, the use of inclined members does come with its challenges. Engineers must carefully calculate the angles and lengths of these members to ensure that they can withstand the forces they will encounter. If an inclined member is not designed properly, it can lead to structural failure, compromising the integrity of the entire building. Therefore, rigorous testing and analysis are essential in the design process to ensure safety and reliability.In conclusion, the concept of the inclined member is fundamental to modern engineering and architecture. These angled structural elements play a vital role in distributing forces, enhancing stability, and contributing to the aesthetic appeal of buildings and bridges. As we continue to innovate in construction techniques, the importance of understanding and effectively utilizing inclined members will only grow. By appreciating the role of these elements, we can gain a deeper understanding of the complexities involved in creating the structures that shape our world.

在工程和建筑的世界中，术语inclined member指的是一种结构元素，它不是垂直或水平放置，而是以一定角度设置。这个概念在桥梁、屋顶和塔楼等各种结构的设计和稳定性中发挥着至关重要的作用。理解inclined member的功能可以大大增强我们对现代建筑复杂性以及支配它的物理原理的欣赏。当工程师设计一个结构时，他们必须考虑作用于其上的力量，包括重力、风力和其他环境因素。inclined member可以比单独的垂直或水平构件更有效地分配这些力量。例如，在桁架系统中，使用inclined members可以将负载从结构的一部分转移到另一部分，从而增加整体强度和稳定性。inclined members的一种常见应用是在屋顶的建造中。倾斜的屋顶旨在使雨水能够轻易排出，防止水积聚导致结构损坏。支撑这些屋顶的椽子通常是inclined members，以提供美观和功能性。通过使用inclined members，建筑师能够创造出视觉上引人注目的设计，同时确保建筑物的安全和耐用。此外，inclined members在桥梁建设中也是必不可少的。许多桥梁采用水平梁和inclined members的组合来保持平衡并支持重负荷。inclined members就像拉紧的缆绳，向下拉动桥面，并均匀分配重量。这个设计不仅增强了桥梁的承载能力，还允许在没有额外支撑柱的情况下实现更长的跨距。除了结构优势，inclined members还可以为建筑或结构的美学特性做出贡献。建筑师经常使用这些元素来创造动态的形状和线条，吸引眼球并提供视觉趣味。垂直、水平和inclined members之间的相互作用可以导致突破传统建筑界限的创新设计。然而，使用inclined members也带来了挑战。工程师必须仔细计算这些成员的角度和长度，以确保它们能够承受将遇到的力量。如果inclined member设计不当，可能导致结构失效，危及整个建筑的完整性。因此，在设计过程中进行严格的测试和分析对于确保安全和可靠性至关重要。总之，inclined member的概念是现代工程和建筑的基础。这些倾斜的结构元素在分配力量、增强稳定性和提高建筑和桥梁的美学吸引力方面发挥着重要作用。随着我们在建筑技术上的不断创新，理解和有效利用inclined members的重要性只会增加。通过欣赏这些元素的作用，我们可以更深入地理解塑造我们世界的结构所涉及的复杂性。