idle adjustment

简明释义

空转调整

英英释义

例句

1.After the maintenance, a quick idle adjustment was necessary to optimize performance.

维护后，进行快速的怠速调整是必要的，以优化性能。

2.The car's manual suggests an idle adjustment every 10,000 miles.

汽车手册建议每行驶10,000英里进行一次怠速调整。

3.The technician performed an idle adjustment to ensure the engine runs smoothly.

技术人员进行了怠速调整以确保发动机平稳运行。

4.During the inspection, the mechanic noticed the need for an idle adjustment.

在检查过程中，机械师注意到需要进行一次怠速调整。

5.An idle adjustment can help improve fuel efficiency in older vehicles.

对旧车进行怠速调整可以帮助提高燃油效率。

作文

In the world of engineering and mechanics, the term idle adjustment refers to the process of fine-tuning the idle speed of an engine. This is crucial for ensuring that the engine runs smoothly when it is not under load. A well-adjusted idle can lead to better fuel efficiency, reduced emissions, and a more responsive throttle. For instance, in automobiles, if the idle speed is too low, the engine may stall, while an excessively high idle can lead to increased wear and tear. Therefore, understanding how to perform an idle adjustment is essential for both mechanics and car owners who wish to maintain their vehicles in optimal condition.The process of idle adjustment typically involves several steps. First, it is necessary to warm up the engine to its normal operating temperature. This ensures that all components are functioning as they should. Next, the technician will locate the idle adjustment screw or mechanism, which is often found on the throttle body or carburetor. By turning this screw, the technician can increase or decrease the idle speed as needed.Moreover, modern vehicles equipped with electronic fuel injection may use a different method for idle adjustment. Instead of a mechanical screw, the idle speed is controlled by the engine control unit (ECU). In such cases, a diagnostic tool may be required to access the ECU settings and make necessary adjustments. This highlights the importance of technological advancements in automotive engineering, as they allow for more precise and efficient adjustments.Understanding the implications of idle adjustment extends beyond just vehicle performance. It also has environmental impacts. An engine that idles too rich can produce excessive emissions, contributing to air pollution. Conversely, an engine that idles too lean may not combust fuel efficiently, leading to wasted resources. Thus, proper idle adjustment is not only beneficial for the vehicle but also for the environment.In conclusion, the concept of idle adjustment plays a vital role in the maintenance and operation of engines. Whether in cars, motorcycles, or other machinery, ensuring that the idle speed is correctly set can enhance performance, improve efficiency, and reduce environmental impact. As technology continues to evolve, so too does the importance of understanding these adjustments. Car owners and mechanics alike must stay informed about the best practices for idle adjustment to keep their engines running smoothly and sustainably.

在工程和机械领域，短语idle adjustment指的是微调发动机怠速的过程。这对于确保发动机在没有负载时平稳运行至关重要。良好的怠速调整可以提高燃油效率，减少排放，并使油门反应更灵敏。例如，在汽车中，如果怠速过低，发动机可能会熄火，而怠速过高则可能导致磨损加剧。因此，了解如何进行idle adjustment对于希望保持车辆最佳状态的机械师和车主来说是必不可少的。idle adjustment的过程通常包括几个步骤。首先，需要将发动机加热到正常工作温度。这确保所有组件都能正常工作。接下来，技术人员将找到怠速调整螺钉或机制，通常位于节气门体或化油器上。通过转动这个螺钉，技术人员可以根据需要增加或减少怠速。此外，现代配备电子燃油喷射系统的车辆可能采用不同的方法进行idle adjustment。在这种情况下，怠速由发动机控制单元（ECU）控制，而不是机械螺钉。在这种情况下，可能需要诊断工具来访问ECU设置并进行必要的调整。这突显了汽车工程技术进步的重要性，因为它们允许更精确和高效的调整。理解idle adjustment的影响不仅限于车辆性能。它还有环境影响。怠速过浓的发动机会产生过量排放，导致空气污染。相反，怠速过稀的发动机可能无法有效燃烧燃料，导致资源浪费。因此，正确的idle adjustment不仅对车辆有利，也对环境有益。总之，idle adjustment的概念在发动机的维护和操作中发挥着重要作用。无论是在汽车、摩托车还是其他机械设备中，确保怠速速度正确设置可以提升性能，提高效率，减少环境影响。随着技术的不断发展，理解这些调整的重要性也在增加。车主和机械师都必须了解idle adjustment的最佳实践，以保持其发动机平稳和可持续地运行。