height above the hull

简明释义

船体以上高度

英英释义

例句

1.The captain noted the height above the hull when planning the ship's loading strategy.

船长在规划船只装载策略时注意了船体高度。

2.The design specifications require a minimum height above the hull for all new vessels.

设计规格要求所有新船的最低船体高度。

3.The engineer measured the height above the hull to ensure the mast would not interfere with overhead obstacles.

工程师测量了船体高度，以确保桅杆不会与上方障碍物干扰。

4.Adjusting the height above the hull can significantly affect the vessel's stability during rough seas.

调整船体高度可以显著影响船只在恶劣海况下的稳定性。

5.For safety reasons, the height above the hull of the radar should be regularly checked.

出于安全原因，雷达的船体高度应定期检查。

作文

Understanding the term height above the hull is crucial for various fields, especially in naval architecture and marine engineering. This phrase refers to the vertical distance from the waterline to a specific point on a vessel's structure, often measured from the hull of the ship. The significance of this measurement cannot be overstated, as it plays a vital role in determining a ship's stability, safety, and overall performance. In essence, the height above the hull can influence how a vessel interacts with water, including its buoyancy and resistance to waves.When designing a ship, engineers must consider the height above the hull to ensure that the vessel can withstand various sea conditions. For instance, a higher height above the hull may allow for better visibility from the bridge, but it can also affect the center of gravity. A ship with an elevated structure might be more susceptible to rolling in rough seas, which could compromise its stability. Therefore, naval architects need to strike a balance between functionality and safety when determining the appropriate height above the hull for different components of the ship.Moreover, the height above the hull is essential for understanding the effects of wind on a vessel. Ships with tall superstructures are more likely to experience wind resistance, which can impact their maneuverability and fuel efficiency. This is particularly important for cargo ships that travel long distances, as any increase in fuel consumption can significantly affect operational costs. Thus, careful consideration of the height above the hull during the design phase can lead to more efficient vessels that perform well in various weather conditions.In addition to stability and wind resistance, the height above the hull also affects the ship's ability to navigate through different waterways. For example, vessels that need to pass under bridges or through locks must adhere to strict height restrictions. If the height above the hull is too great, it could prevent the ship from safely passing under these structures, leading to delays and increased costs. Therefore, understanding the implications of the height above the hull is vital for ensuring smooth navigation and compliance with maritime regulations.Furthermore, the height above the hull can also influence the aesthetic appeal of a ship. Designers often aim to create visually striking vessels, and the proportions of the superstructure in relation to the hull can greatly impact the overall look of the ship. A well-proportioned height above the hull can enhance the ship's beauty while still maintaining its functionality. As such, naval architects must not only focus on technical specifications but also consider the artistic elements of their designs.In conclusion, the term height above the hull encompasses a wide range of considerations in ship design and operation. From stability and maneuverability to aesthetic appeal and regulatory compliance, this measurement is fundamental to the successful development of marine vessels. By thoroughly understanding and applying the concept of height above the hull, engineers and designers can create ships that are not only safe and efficient but also visually appealing and capable of navigating a variety of waterways. As the maritime industry continues to evolve, the importance of this measurement will remain a key factor in the advancement of ship design and engineering practices.

理解术语height above the hull对于各种领域尤其是海洋建筑和海洋工程至关重要。这个短语指的是从水线到船舶结构特定点的垂直距离，通常是从船体测量的。这一测量的重要性不容小觑，因为它在确定船舶的稳定性、安全性和整体性能方面发挥着重要作用。实际上，height above the hull可以影响船舶与水的相互作用，包括其浮力和对波浪的阻力。在设计船舶时，工程师必须考虑height above the hull以确保船舶能够承受各种海况。例如，较高的height above the hull可能会提高桥上的可视性，但也可能影响重心。一艘具有高结构的船可能在恶劣海况下更容易倾斜，从而危及其稳定性。因此，海洋建筑师需要在功能性和安全性之间找到平衡，以确定不同船舶组件的适当height above the hull。此外，height above the hull对理解风对船舶的影响也至关重要。具有高超结构的船舶更可能遭受风阻，这可能影响其机动性和燃油效率。这对于长途航行的货轮尤为重要，因为任何燃油消耗的增加都可能显著影响运营成本。因此，在设计阶段仔细考虑height above the hull可以导致更高效的船舶，在各种天气条件下表现良好。除了稳定性和风阻，height above the hull还影响船舶在不同水道中的航行能力。例如，需要在桥下或通过船闸的船舶必须遵守严格的高度限制。如果height above the hull过高，可能会阻止船舶安全通过这些结构，导致延误和增加成本。因此，理解height above the hull的影响对于确保顺利航行和遵守海事法规至关重要。此外，height above the hull还可以影响船舶的美观设计。设计师通常旨在创造视觉上引人注目的船舶，超结构与船体的比例会极大影响船舶的整体外观。良好比例的height above the hull可以增强船舶的美感，同时仍保持其功能性。因此，海洋建筑师不仅要关注技术规格，还要考虑设计的艺术元素。总之，术语height above the hull在船舶设计和操作中涵盖了广泛的考虑因素。从稳定性和机动性到美学吸引力和合规性，这一测量对于成功开发海洋船舶至关重要。通过深入理解和应用height above the hull的概念，工程师和设计师可以创造出不仅安全高效，而且在视觉上吸引人且能够在各种水道中航行的船舶。随着海洋行业的不断发展，这一测量的重要性将继续成为船舶设计和工程实践进步的关键因素。