hawse bolster

简明释义

锚链孔唇口

英英释义

例句

1.During the storm, the hawse bolster played a critical role in keeping the anchor chain aligned.

在风暴中，hawse bolster在保持锚链对齐方面发挥了关键作用。

2.The ship's design included a reinforced hawse bolster for added durability.

这艘船的设计包括一个加固的hawse bolster以增加耐用性。

3.The crew inspected the hawse bolster before setting sail to ensure it was secure.

船员在起航前检查了hawse bolster以确保其牢固。

4.After the docking, the team checked the hawse bolster for any signs of damage.

停靠后，团队检查了hawse bolster是否有任何损坏迹象。

5.He explained how to maintain the hawse bolster to prevent wear and tear over time.

他解释了如何维护hawse bolster以防止随着时间的推移而磨损。

作文

Navigating the world of maritime terminology can often be a daunting task, especially for those who are not familiar with the intricacies of nautical language. One such term that holds significant importance in the context of shipbuilding and marine engineering is the hawse bolster. This component plays a critical role in the overall functionality and safety of a vessel, particularly in relation to its anchoring and mooring systems. In this essay, we will explore the definition, purpose, and significance of the hawse bolster in maritime operations.The hawse bolster is essentially a structural component that is located on the bow of a ship. It serves as a reinforcement point for the hawse pipe, which is the tube through which the anchor chain passes. The primary function of the hawse bolster is to provide additional strength and support to the hawse pipe, ensuring that it can withstand the immense forces exerted during anchoring and mooring operations. Without a properly designed and installed hawse bolster, the integrity of the hawse pipe could be compromised, leading to potential failures that could jeopardize the safety of the vessel and its crew.In addition to its structural role, the hawse bolster also contributes to the overall efficiency of anchoring procedures. When a vessel is preparing to anchor, the anchor chain must pass through the hawse pipe and into the water. The hawse bolster helps to guide the chain smoothly, minimizing friction and wear on both the chain and the hawse pipe itself. This ensures that the anchoring process is not only safe but also efficient, allowing for quick deployment and retrieval of the anchor as needed.Moreover, the design of the hawse bolster can vary depending on the type of vessel and its intended use. For instance, larger ships may require more robust and heavily reinforced hawse bolsters to accommodate the greater loads associated with their size and operational demands. Conversely, smaller vessels may utilize lighter versions of the hawse bolster, tailored to their specific anchoring needs. Regardless of the design variations, the fundamental purpose remains the same: to enhance the performance and reliability of the anchoring system.The significance of the hawse bolster extends beyond its physical attributes; it is also a symbol of the meticulous engineering that goes into modern shipbuilding. Each component, including the hawse bolster, is carefully crafted and tested to ensure it meets the rigorous standards set by maritime authorities. This attention to detail not only enhances the safety of individual vessels but also contributes to the overall safety of maritime operations worldwide.In conclusion, the hawse bolster is a vital component of a ship's anchoring system, providing essential support and guidance for the hawse pipe. Its role in enhancing the safety and efficiency of anchoring procedures cannot be overstated. As we continue to explore the depths of maritime terminology and technology, understanding the importance of components like the hawse bolster allows us to appreciate the complexity and ingenuity involved in maritime engineering. Whether one is a seasoned mariner or a newcomer to the field, recognizing the significance of the hawse bolster is crucial in fostering a deeper understanding of the maritime industry as a whole.

在海事术语的世界中导航，对于那些不熟悉航海语言细节的人来说，往往是一项艰巨的任务。其中一个在船舶建造和海洋工程中具有重要意义的术语是hawse bolster。这个组件在船只的整体功能和安全性中发挥着关键作用，特别是在锚泊和系泊系统方面。在这篇文章中，我们将探讨hawse bolster的定义、用途和在海事操作中的重要性。hawse bolster基本上是位于船首的结构组件。它作为锚链通过的锚管的加固点。hawse bolster的主要功能是为锚管提供额外的强度和支持，确保其能够承受在锚泊和系泊操作过程中施加的巨大力量。如果没有适当设计和安装的hawse bolster，锚管的完整性可能会受到损害，从而导致潜在的故障，危及船只及其船员的安全。除了其结构作用外，hawse bolster还对锚泊程序的整体效率作出贡献。当船只准备锚泊时，锚链必须通过锚管进入水中。hawse bolster帮助平滑引导链条，最小化链条和锚管本身的摩擦和磨损。这确保了锚泊过程不仅安全而且高效，使得锚的快速部署和回收成为可能。此外，hawse bolster的设计可以根据船只类型及其预期用途而有所不同。例如，更大的船只可能需要更坚固和重型的hawse bolster，以适应与其尺寸和操作需求相关的更大负荷。相反，小型船只可能使用更轻版本的hawse bolster，以适应其特定的锚泊需求。无论设计变化如何，其基本目的始终相同：增强锚泊系统的性能和可靠性。hawse bolster的重要性超越了其物理属性；它也是现代船舶建造中精密工程的象征。每个组件，包括hawse bolster，都经过精心制作和测试，以确保其符合海事当局设定的严格标准。这种对细节的关注不仅增强了单个船只的安全性，还促进了全球海事操作的整体安全。总之，hawse bolster是船只锚泊系统的重要组成部分，为锚管提供必要的支持和引导。它在增强锚泊程序的安全性和效率方面的作用不可低估。当我们继续探索海事术语和技术的深度时，理解像hawse bolster这样的组件的重要性使我们能够欣赏现代海洋工程的复杂性和独创性。无论是经验丰富的水手还是该领域的新手，认识到hawse bolster的重要性对于加深对整个海事行业的理解至关重要。