hoisting capacity

简明释义

起重能力

英英释义

例句

1.Before starting the project, we need to verify the hoisting capacity of the equipment.

在项目开始之前，我们需要验证设备的起重能力。

2.The crane's hoisting capacity is rated at 10 tons, making it suitable for heavy construction work.

这台起重机的起重能力为10吨，适合重型建筑工作。

3.The hoisting capacity of the elevator determines how many passengers can be carried at once.

电梯的起重能力决定了一次可以载多少乘客。

4.The new model has a higher hoisting capacity than its predecessor, allowing for more efficient operations.

新型号的起重能力比前一代更高，可以提高操作效率。

5.Safety regulations require that we never exceed the hoisting capacity of the lift.

安全规定要求我们绝不能超过升降机的起重能力。

作文

Understanding the concept of hoisting capacity is essential for anyone working in industries that involve lifting heavy materials. The term hoisting capacity refers to the maximum weight that a crane or hoisting equipment can safely lift. This capacity is determined by various factors, including the design of the equipment, the materials used in its construction, and the safety regulations that govern its use. For instance, a crane with a high hoisting capacity is crucial on construction sites where large beams, concrete blocks, and other heavy items need to be moved efficiently. In practical terms, understanding hoisting capacity helps prevent accidents and ensures that operations run smoothly. When workers are aware of the limitations of their equipment, they can make informed decisions about how to proceed with lifting tasks. Exceeding the hoisting capacity of a crane can lead to catastrophic failures, resulting in injuries, fatalities, and significant financial losses. Therefore, it is imperative for operators to be trained in recognizing the hoisting capacity of their machines and adhering to these limits rigorously.Moreover, the hoisting capacity can vary depending on the configuration of the crane. For example, a crane may have a different hoisting capacity when it is fully extended compared to when it is partially retracted. This variability necessitates careful planning and execution of lifting operations. Operators must consult the manufacturer's specifications and follow established guidelines to determine the appropriate hoisting capacity for each specific scenario.Additionally, advancements in technology have led to the development of smarter cranes equipped with load monitoring systems that automatically calculate the hoisting capacity. These systems enhance safety by providing real-time feedback to operators, allowing them to adjust their lifting strategies accordingly. By integrating such technology, companies can significantly reduce the risk of overloading equipment and ensure compliance with safety standards.In conclusion, the concept of hoisting capacity is not just a technical specification; it is a critical aspect of operational safety and efficiency in the lifting industry. Understanding and respecting this concept can save lives, protect assets, and promote a culture of safety in workplaces. As the industry continues to evolve, ongoing education and training regarding hoisting capacity will remain paramount for all professionals involved in lifting operations.

理解起重能力的概念对任何从事重物提升行业的人来说都是至关重要的。术语起重能力指的是起重机或起重设备可以安全提升的最大重量。这个能力受到多种因素的影响，包括设备的设计、所用材料的质量以及管理其使用的安全法规。例如，在建筑工地上，一台具有高起重能力的起重机是至关重要的，因为需要有效搬运大型梁、混凝土块和其他重物。在实际操作中，理解起重能力有助于防止事故发生，并确保操作顺利进行。当工人了解他们设备的限制时，他们可以就如何进行提升任务做出明智的决定。超出起重机的起重能力可能导致灾难性的故障，造成伤害、死亡和重大财务损失。因此，操作人员必须接受培训，以识别他们机器的起重能力并严格遵守这些限制。此外，起重能力可能会根据起重机的配置而有所不同。例如，当起重机完全伸展时，其起重能力可能与部分收缩时不同。这种变化性要求在提升操作中进行细致的规划和执行。操作员必须参考制造商的规格，并遵循既定的指南，以确定每种特定场景的适当起重能力。另外，技术的进步使得配备负载监测系统的智能起重机得以开发，这些系统可以自动计算起重能力。这些系统通过提供实时反馈给操作员，提高了安全性，使他们能够相应调整提升策略。通过整合这种技术，公司可以显著降低过载设备的风险，并确保符合安全标准。总之，起重能力的概念不仅仅是一个技术规格；它是提升行业操作安全和效率的关键方面。理解和尊重这一概念可以挽救生命、保护资产，并在工作场所促进安全文化。随着行业的不断发展，关于起重能力的持续教育和培训将对所有参与提升操作的专业人士保持至关重要。