fuel injector holder

简明释义

喷油器托架

英英释义

例句

1.Replacing the fuel injector holder is essential for optimal engine performance.

更换燃油喷射器支架对于优化发动机性能至关重要。

2.The mechanic carefully removed the old fuel injector from the fuel injector holder.

机械师小心地从燃油喷射器支架上拆下旧的燃油喷射器。

3.Make sure to clean the fuel injector holder before installing the new injectors.

在安装新的喷油器之前，确保清洁燃油喷射器支架。

4.A broken fuel injector holder can lead to fuel leaks in the engine.

损坏的燃油喷射器支架可能导致发动机燃油泄漏。

5.During the inspection, we found that the fuel injector holder was cracked.

在检查过程中，我们发现燃油喷射器支架有裂缝。

作文

In the world of automotive engineering, precision and efficiency are paramount. One crucial component that plays a significant role in the performance of an engine is the fuel injector holder. This specialized part serves as a mounting point for the fuel injectors, which are responsible for delivering fuel into the combustion chamber of an internal combustion engine. The fuel injector holder ensures that the injectors are securely fastened in place, maintaining the correct alignment and positioning needed for optimal fuel delivery.The design of a fuel injector holder may vary depending on the engine type and manufacturer. Typically made from durable materials such as aluminum or plastic, these holders are engineered to withstand the high temperatures and pressures found within an engine compartment. A well-designed fuel injector holder not only supports the injectors but also plays a role in preventing fuel leaks, which can lead to decreased engine performance and increased emissions.When discussing the importance of the fuel injector holder, it is essential to understand its function in the overall fuel injection system. The fuel injectors spray a fine mist of fuel into the combustion chamber at precise intervals, allowing for efficient combustion. If the fuel injector holder is not functioning correctly, it can lead to misalignment of the injectors, resulting in uneven fuel distribution. This misalignment can cause various engine issues, including rough idling, reduced power output, and increased fuel consumption.Moreover, the fuel injector holder is often designed with features that facilitate easy installation and maintenance. For instance, some holders come with built-in O-rings or seals that help create a secure fit and prevent leaks. This design consideration not only simplifies the installation process but also enhances the reliability of the fuel injection system.In recent years, advancements in technology have led to the development of more sophisticated fuel injector holders. Some modern vehicles utilize electronic fuel injection systems that require precise control over fuel delivery. In such cases, the fuel injector holder must accommodate additional components, such as sensors and wiring harnesses, to ensure seamless communication between the engine control unit and the injectors. This integration of technology has significantly improved engine performance and fuel efficiency.As with any automotive component, the fuel injector holder requires regular inspection and maintenance to ensure it remains in good working condition. Mechanics often check for signs of wear or damage during routine service checks. If a fuel injector holder is found to be compromised, it should be replaced promptly to avoid further complications in the fuel injection system.In conclusion, the fuel injector holder may seem like a small part in the grand scheme of an engine's operation, but its role is undeniably vital. By securely holding the fuel injectors in place and ensuring proper alignment, this component contributes to the overall efficiency and performance of the engine. Understanding the significance of the fuel injector holder can lead to better maintenance practices and ultimately prolong the life of an engine. Therefore, whether you are a car enthusiast or a professional mechanic, recognizing the importance of this component is essential in the pursuit of optimal vehicle performance.

在汽车工程的世界中，精确和效率至关重要。一个对发动机性能起着重要作用的关键部件是燃油喷射器支架。这个专用零件作为燃油喷射器的安装点，负责将燃油输送到内燃机的燃烧室。燃油喷射器支架确保喷射器被牢固地固定在适当的位置，保持最佳燃油输送所需的正确对齐和定位。燃油喷射器支架的设计可能因发动机类型和制造商而异。通常由铝或塑料等耐用材料制成，这些支架经过工程设计，以承受发动机舱内的高温和高压。设计良好的燃油喷射器支架不仅支持喷射器，还在防止燃油泄漏方面发挥作用，燃油泄漏会导致发动机性能下降和排放增加。当讨论燃油喷射器支架的重要性时，了解其在整体燃油喷射系统中的功能至关重要。燃油喷射器以精确的间隔将细雾状燃油喷入燃烧室，从而实现高效燃烧。如果燃油喷射器支架未正常工作，可能导致喷射器的错位，从而导致燃油分配不均。这种错位可能导致各种发动机问题，包括怠速不稳、动力输出减少和燃油消耗增加。此外，燃油喷射器支架通常设计有便于安装和维护的功能。例如，一些支架配备内置O形圈或密封件，有助于创建安全的配合并防止泄漏。这种设计考虑不仅简化了安装过程，还增强了燃油喷射系统的可靠性。近年来，技术的进步导致了更复杂的燃油喷射器支架的发展。一些现代车辆采用电子燃油喷射系统，需要对燃油输送进行精确控制。在这种情况下，燃油喷射器支架必须容纳额外的组件，如传感器和线束，以确保发动机控制单元与喷射器之间的无缝通信。这种技术的整合显著提高了发动机性能和燃油效率。与任何汽车部件一样，燃油喷射器支架需要定期检查和维护，以确保其保持良好的工作状态。机械师通常在例行服务检查期间检查磨损或损坏的迹象。如果发现燃油喷射器支架受到损坏，应及时更换，以避免燃油喷射系统出现进一步的并发症。总之，燃油喷射器支架在发动机运行的整体过程中可能看似一个小部件，但其作用无疑是至关重要的。通过牢固地固定燃油喷射器并确保正确对齐，该组件有助于发动机的整体效率和性能。理解燃油喷射器支架的重要性可以促进更好的维护实践，并最终延长发动机的使用寿命。因此，无论您是汽车爱好者还是专业机械师，认识到这一组件的重要性对于追求最佳车辆性能至关重要。