fuel admission valve

简明释义

燃油进入阀

英英释义

例句

1.The mechanic replaced the fuel admission valve to improve the engine's performance.

机械师更换了燃油进气阀以提高发动机的性能。

2.A faulty fuel admission valve can lead to poor fuel efficiency.

故障的燃油进气阀可能导致燃油效率低下。

3.The technician adjusted the fuel admission valve to optimize the air-fuel mixture.

技术人员调整了燃油进气阀以优化空气与燃油的混合比例。

4.Cleaning the fuel admission valve can help restore proper fuel flow.

清洁燃油进气阀有助于恢复正常的燃油流量。

5.During the inspection, we found that the fuel admission valve was leaking.

在检查过程中，我们发现燃油进气阀漏油。

作文

The internal combustion engine is a marvel of engineering that has powered vehicles and machinery for over a century. One of the critical components in this engine is the fuel admission valve, which plays a vital role in regulating the flow of fuel into the combustion chamber. Understanding how this component works can provide insights into the overall efficiency and performance of an engine. The fuel admission valve is responsible for allowing the correct amount of fuel to enter the combustion chamber at the right time. It opens and closes in synchronization with the engine's cycles, ensuring that fuel is injected precisely when needed. This timing is crucial because it affects the combustion process, influencing both power output and fuel efficiency.When the fuel admission valve opens, fuel is drawn from the fuel tank through the fuel lines and into the intake manifold. The valve's design allows it to respond quickly to the engine's demands, adjusting the fuel flow based on throttle input and engine speed. A well-functioning fuel admission valve ensures that the engine receives an optimal air-fuel mixture, which is essential for efficient combustion.In modern engines, the fuel admission valve is often controlled electronically, allowing for more precise adjustments than traditional mechanical systems. This electronic control can adapt to various driving conditions, optimizing performance and minimizing emissions. As environmental regulations become stricter, the importance of efficient fuel delivery systems becomes even more apparent.However, like any mechanical component, the fuel admission valve can experience wear and tear over time. Issues such as clogging, leaks, or malfunctioning sensors can lead to poor engine performance, increased fuel consumption, and higher emissions. Regular maintenance and timely repairs are essential to keep the fuel admission valve functioning correctly and to ensure the longevity of the engine.In conclusion, the fuel admission valve is a small but crucial part of the internal combustion engine. Its ability to regulate fuel flow directly impacts engine performance, efficiency, and emissions. Understanding its function highlights the importance of maintaining this component and the entire fuel system in vehicles. As technology continues to advance, the role of the fuel admission valve will evolve, but its fundamental purpose will remain the same: to provide the engine with the fuel it needs to operate effectively. Overall, the study of components like the fuel admission valve not only enhances our understanding of automotive engineering but also emphasizes the intricate design and functionality that contribute to the performance of modern vehicles.

内燃机是工程学的奇迹，已经为车辆和机械提供动力超过一个世纪。这个发动机中的一个关键组件是燃油进气阀，它在调节燃油流入燃烧室方面发挥着重要作用。理解这个组件是如何工作的，可以为我们提供关于发动机整体效率和性能的见解。燃油进气阀负责在正确的时间允许适量的燃油进入燃烧室。它与发动机的循环同步开关，确保燃油在需要时被精确注入。这个时机至关重要，因为它影响燃烧过程，进而影响功率输出和燃油效率。当燃油进气阀打开时，燃油从油箱通过燃油管线被抽入进气歧管。阀门的设计使其能够快速响应发动机的需求，根据油门输入和发动机转速调整燃油流量。一个正常运作的燃油进气阀确保发动机接收最佳的空气-燃油混合物，这对高效燃烧至关重要。在现代发动机中，燃油进气阀通常由电子控制，允许比传统机械系统更精确的调整。这种电子控制可以适应各种驾驶条件，优化性能并最小化排放。随着环境法规变得越来越严格，燃油输送系统高效性的意义愈发明显。然而，像任何机械组件一样，燃油进气阀随着时间的推移也会出现磨损。堵塞、泄漏或传感器故障等问题可能导致发动机性能下降、燃油消耗增加和排放增高。定期维护和及时修理对于保持燃油进气阀正常工作至关重要，并确保发动机的耐用性。总之，燃油进气阀是内燃机中一个小但至关重要的部分。它调节燃油流量的能力直接影响发动机的性能、效率和排放。理解其功能突显了维护该组件及整个燃油系统的重要性。随着技术的不断进步，燃油进气阀的角色将会演变，但其基本目的仍将保持不变：为发动机提供其有效运转所需的燃油。总体而言，研究像燃油进气阀这样的组件不仅增强了我们对汽车工程的理解，还强调了现代车辆性能所需的复杂设计和功能。