freeboard depth ratio

简明释义

干舷型深比

英英释义

例句

1.The design of the vessel must ensure that the freeboard depth ratio 浮船深度比 meets safety regulations.

船舶设计必须确保<顺利浮起深度比>符合安全规定。

2.The freeboard depth ratio 浮船深度比 is crucial for determining how much cargo a ship can safely carry.

<浮船深度比> 对于确定一艘船可以安全运输多少货物至关重要。

3.During the inspection, the freeboard depth ratio 浮船深度比 was found to be below the required standard.

在检查中，发现<浮船深度比>低于所需标准。

4.A higher freeboard depth ratio 浮船深度比 indicates better stability in rough waters.

较高的<浮船深度比>表示在恶劣水域中的更好稳定性。

5.Engineers calculated the freeboard depth ratio 浮船深度比 to optimize the ship's performance.

工程师计算了<浮船深度比>以优化船舶的性能。

作文

The concept of freeboard depth ratio is essential in the field of naval architecture and marine engineering. It refers to the relationship between the freeboard, which is the vertical distance from the waterline to the upper deck level of a ship, and the total depth of the vessel. Understanding this ratio is crucial for ensuring the safety and stability of ships and boats, particularly in rough seas or adverse weather conditions. The importance of maintaining an appropriate freeboard depth ratio cannot be overstated. A ship with an inadequate freeboard might be at risk of taking on water, especially in heavy swells or during strong winds. Conversely, a vessel with too much freeboard could face stability issues, as it may be more susceptible to being blown off course by the wind. Therefore, the design of a ship must carefully consider this ratio to ensure optimal performance and safety.In practical terms, the freeboard depth ratio can be calculated using the formula: Freeboard Depth Ratio = Freeboard / Total Depth. This calculation helps engineers and designers assess whether a ship meets the necessary standards for seaworthiness. Regulatory bodies often impose minimum freeboard requirements based on the type of vessel and its intended use. For instance, cargo ships may have different requirements compared to passenger ferries, reflecting their unique operational challenges.Furthermore, the freeboard depth ratio can also influence the overall design and aesthetics of a ship. Designers must strike a balance between functionality and visual appeal. A well-proportioned vessel not only performs better but also attracts more customers in the competitive maritime industry. As such, understanding the implications of the freeboard depth ratio is vital for both engineers and designers alike.In conclusion, the freeboard depth ratio plays a pivotal role in ensuring the safety, stability, and efficiency of maritime vessels. By comprehensively understanding this concept, professionals in the field can make informed decisions that enhance the performance and reliability of ships. As the maritime industry continues to evolve, the significance of this ratio will remain a cornerstone of naval architecture, guiding the design and operation of vessels across the globe.

“自由板深度比”这一概念在海洋建筑和海洋工程领域至关重要。它是指自由板，即从水线到船只上层甲板水平的垂直距离，与船只的总深度之间的关系。理解这个比率对于确保船舶和船只的安全和稳定性至关重要，尤其是在恶劣海况或不利天气条件下。保持适当的自由板深度比的重要性不容小觑。一艘自由板不足的船可能面临进水的风险，特别是在强烈波浪或强风中。相反，自由板过高的船可能会面临稳定性问题，因为它可能更容易受到风的影响而偏离航向。因此，船舶的设计必须仔细考虑这一比率，以确保最佳性能和安全性。在实际操作中，自由板深度比可以通过以下公式计算：自由板深度比 = 自由板 / 总深度。这个计算帮助工程师和设计师评估一艘船是否符合必要的海上安全标准。监管机构通常根据船舶的类型和预期用途施加最低自由板要求。例如，货船的要求可能与客船不同，反映出它们独特的操作挑战。此外，自由板深度比还会影响船只的整体设计和美学。设计师必须在功能性和视觉吸引力之间找到平衡。合理比例的船只不仅性能更佳，而且在竞争激烈的海事行业中更具吸引力。因此，理解自由板深度比的影响对工程师和设计师而言至关重要。总之，自由板深度比在确保海洋船舶的安全、稳定和效率方面发挥着关键作用。通过全面理解这一概念，该领域的专业人士可以做出明智的决策，从而增强船舶的性能和可靠性。随着海洋行业的不断发展，这一比率的重要性将继续成为海洋建筑的基石，指导全球船舶的设计和运营。