failure condition

简明释义

故障情况

英英释义

例句

1.The system went into safe mode after detecting a failure condition 故障条件 in the hardware.

系统在检测到硬件中的故障条件后进入安全模式。

2.The software crashed due to a failure condition 故障条件 that was not handled properly.

由于未妥善处理的故障条件，软件崩溃了。

3.A thorough analysis revealed the failure condition 故障条件 that led to the power outage.

全面分析揭示了导致停电的故障条件。

4.Engineers must identify any failure condition 故障条件 before launching the new product.

工程师在发布新产品之前必须识别任何故障条件。

5.To prevent accidents, operators are trained to recognize failure conditions 故障条件 during operations.

为了防止事故，操作员接受培训以识别操作过程中的故障条件。

作文

In any system, whether it be mechanical, electronic, or even biological, understanding the concept of a failure condition is crucial. A failure condition refers to a state or set of circumstances under which a system fails to perform its intended function. This can occur due to various reasons such as design flaws, material fatigue, external environmental factors, or human error. By analyzing these failure conditions, engineers and scientists can develop more robust systems that are less likely to fail under pressure.For instance, consider an aircraft's engine. The engine is designed to operate under specific conditions, including temperature, pressure, and speed. If any of these parameters exceed their limits, the engine may enter a failure condition. This could lead to catastrophic results, not only endangering the lives of passengers but also causing significant financial loss for the airline. Therefore, rigorous testing and simulations are conducted to identify potential failure conditions and mitigate their impact.Moreover, in software development, a failure condition might refer to a scenario where a program encounters an unexpected input or situation that it cannot handle, leading to a crash or erroneous output. Developers must anticipate these scenarios and implement error handling mechanisms to ensure that the software can gracefully recover from such failure conditions. This proactive approach helps maintain user trust and satisfaction, as users expect technology to work seamlessly.In the field of medicine, understanding failure conditions is equally important. For example, when a patient undergoes surgery, doctors must consider various failure conditions that could arise during the procedure, such as excessive bleeding or adverse reactions to anesthesia. By preparing for these possibilities and having contingency plans in place, medical professionals can significantly improve patient outcomes and reduce the risk of complications.The significance of identifying and addressing failure conditions extends beyond technical fields. In everyday life, we encounter situations where a lack of preparation for potential failure conditions can lead to undesirable outcomes. For instance, a student who neglects to study for an exam may find themselves in a failure condition when faced with challenging questions. Similarly, a business that fails to adapt to market changes may find itself in a failure condition that jeopardizes its viability.In conclusion, the concept of failure condition is integral to various fields and aspects of life. By understanding what constitutes a failure condition and how to prevent or manage it, we can enhance our ability to succeed in both professional and personal endeavors. Whether through engineering, software development, healthcare, or daily decision-making, recognizing and addressing failure conditions can lead to improved performance, safety, and overall success. Thus, continuous learning and adaptation are essential in navigating the complexities of our world, ensuring that we are prepared to face potential failure conditions head-on.

在任何系统中，无论是机械的、电子的，还是生物的，理解“failure condition”的概念都是至关重要的。“failure condition”指的是系统未能执行其预期功能的状态或一组情况。这可能由于设计缺陷、材料疲劳、外部环境因素或人为错误等各种原因而发生。通过分析这些“failure conditions”，工程师和科学家可以开发出更强大的系统，从而降低在压力下发生故障的可能性。例如，考虑一架飞机的发动机。发动机被设计为在特定条件下运行，包括温度、压力和速度。如果这些参数中的任何一个超出其限制，发动机可能会进入“failure condition”。这可能导致灾难性的结果，不仅危及乘客的生命，还会给航空公司造成重大财务损失。因此，进行严格的测试和模拟以识别潜在的“failure conditions”并减轻其影响是非常重要的。此外，在软件开发中，“failure condition”可能指程序遇到意外输入或无法处理的情况，导致崩溃或错误输出。开发人员必须预测这些场景，并实施错误处理机制，以确保软件能够优雅地从这些“failure conditions”中恢复。这种主动的方法有助于维护用户的信任和满意度，因为用户期望技术能够无缝工作。在医学领域，理解“failure conditions”同样重要。例如，当患者接受手术时，医生必须考虑在手术过程中可能出现的各种“failure conditions”，如过度出血或对麻醉剂的不良反应。通过为这些可能性做好准备并制定应急计划，医疗专业人员可以显著改善患者的治疗结果，并减少并发症的风险。识别和解决“failure conditions”的重要性不仅限于技术领域。在日常生活中，我们会遇到一些情况，如果没有为潜在的“failure conditions”做好准备，可能会导致不理想的结果。例如，一个忽视复习的学生在面对难题时可能会发现自己处于“failure condition”。同样，一个未能适应市场变化的企业可能会发现自己处于危及其生存的“failure condition”。总之，“failure condition”的概念在各个领域和生活的各个方面都是不可或缺的。通过理解什么构成了“failure condition”以及如何防止或管理它，我们可以增强在专业和个人事务中取得成功的能力。无论是在工程、软件开发、医疗保健还是日常决策中，识别和解决“failure conditions”都能提高表现、安全性和整体成功。因此，持续学习和适应在应对我们世界的复杂性方面是必不可少的，确保我们能够准备好直面潜在的“failure conditions”。