emergency cold starting

简明释义

冷态应急起动

英英释义

例句

1.During the winter months, knowing how to perform an emergency cold starting 紧急冷启动 on your vehicle can save you from being stranded.

在冬季，知道如何对您的车辆进行emergency cold starting 紧急冷启动可以让您免于被困。

2.The maintenance team practiced emergency cold starting 紧急冷启动 drills to prepare for unexpected failures of the main systems.

维护团队进行了emergency cold starting 紧急冷启动演练，以准备应对主要系统的意外故障。

3.Before the race, the crew ensured they were familiar with emergency cold starting 紧急冷启动 techniques in case of engine issues.

在比赛前，工作人员确保他们熟悉emergency cold starting 紧急冷启动技术，以防发动机出现问题。

4.In the event of a power outage, the technician performed an emergency cold starting 紧急冷启动 of the backup generator to ensure the facility remained operational.

在停电的情况下，技术人员对备用发电机进行了emergency cold starting 紧急冷启动，以确保设施保持运行。

5.The pilot was trained to handle emergency cold starting 紧急冷启动 procedures in case of engine failure during takeoff.

飞行员接受了在起飞过程中发动机故障时处理emergency cold starting 紧急冷启动程序的训练。

作文

In today's fast-paced world, the ability to respond quickly to unforeseen circumstances is crucial. One such situation that often arises is when a vehicle or machinery fails to start due to extremely low temperatures. This phenomenon is commonly referred to as emergency cold starting. The term emergency cold starting refers to the process of getting a vehicle or machine operational in frigid conditions when it typically would not start on its own. This can be particularly challenging for diesel engines, which are more susceptible to cold weather issues than gasoline engines. When temperatures drop significantly, the oil in the engine thickens, making it difficult for the engine components to move freely. Additionally, the battery's capacity is reduced in colder weather, which means it may not have enough power to crank the engine. As a result, drivers and operators must employ various techniques for emergency cold starting to ensure their vehicles and machines can function properly. One common method for emergency cold starting is the use of block heaters. These devices warm the engine coolant before starting, making it easier for the engine to turn over. Another technique involves using jumper cables to connect a struggling battery to a functioning one, providing the necessary boost to start the engine. In some cases, operators may also resort to using specialized starting fluids that can help ignite the fuel in extremely cold conditions. It is important to note that emergency cold starting is not just about getting the engine running; it also involves taking precautions to avoid potential damage to the engine. For instance, cranking the engine for too long without success can lead to battery drain and increased wear on the starter motor. Therefore, understanding the best practices for emergency cold starting can save time, money, and prevent further complications. In addition to these practical methods, preparation is key to avoiding emergency cold starting situations altogether. Regular maintenance of the vehicle, including ensuring the battery is in good condition and using the right type of oil for cold weather, can significantly reduce the chances of encountering starting issues. Moreover, investing in winter tires and keeping the fuel tank at least half full can also contribute to better performance in cold conditions. In conclusion, emergency cold starting is an essential skill for anyone who operates vehicles or machinery in cold climates. By understanding the challenges posed by low temperatures and employing effective strategies, individuals can ensure their equipment remains operational and reliable. With the right knowledge and preparation, the daunting task of emergency cold starting can become a manageable aspect of winter driving and operation.

在当今快节奏的世界中，迅速应对不可预见情况的能力至关重要。其中一个常见的情况是，当由于极低的温度而导致车辆或机械无法启动时。这种现象通常被称为紧急冷启动。术语紧急冷启动指的是在寒冷条件下使车辆或机器正常运行的过程，而在这种情况下，它通常无法自行启动。这对于柴油发动机尤其具有挑战性，因为它们比汽油发动机更容易受到寒冷天气问题的影响。当温度显著下降时，发动机中的油会变稠，使得发动机部件难以自由移动。此外，电池在寒冷天气中的容量会降低，这意味着它可能没有足够的电力来启动发动机。因此，驾驶员和操作员必须采用各种技术来确保他们的车辆和机器能够正常工作。一种常见的紧急冷启动方法是使用发动机加热器。这些设备在启动之前加热发动机冷却液，使发动机更容易转动。另一种技术是使用跳线电缆将一个正在挣扎的电池连接到一个正常工作的电池，以提供启动发动机所需的动力。在某些情况下，操作员还可能使用专用的启动液体，这可以帮助在极冷的条件下点燃燃料。需要注意的是，紧急冷启动不仅仅是让发动机运行；它还涉及采取预防措施以避免潜在的发动机损坏。例如，长时间没有成功地启动车辆可能导致电池耗尽并增加起动电动机的磨损。因此，了解紧急冷启动的最佳实践可以节省时间和金钱，并防止进一步的并发症。除了这些实用方法外，准备工作是避免紧急冷启动情况的关键。定期维护车辆，包括确保电池状况良好以及使用适合寒冷天气的油，可以显著减少遇到启动问题的机会。此外，投资冬季轮胎并保持油箱至少半满也有助于在寒冷条件下更好地表现。总之，紧急冷启动是任何在寒冷气候中操作车辆或机械的人都必须掌握的一项基本技能。通过了解低温带来的挑战并采用有效的策略，个人可以确保他们的设备保持运行和可靠。凭借正确的知识和准备，紧急冷启动这一艰巨任务可以成为冬季驾驶和操作的可管理方面。