deballasting procedure

简明释义

卸压载程序

英英释义

例句

1.Failure to execute the deballasting procedure 排水程序 properly can lead to dangerous conditions.

未能正确执行deballasting procedure 排水程序可能导致危险情况。

2.The deballasting procedure 排水程序 is crucial for maintaining stability during rough seas.

在恶劣海况下，deballasting procedure 排水程序对于维持稳定性至关重要。

3.The captain instructed the crew to follow the deballasting procedure 排水程序 outlined in the safety manual.

船长指示船员遵循安全手册中列出的deballasting procedure 排水程序。

4.During the deballasting procedure 排水程序, water is pumped out of the ballast tanks to reduce weight.

在deballasting procedure 排水程序中，水被抽出压舱舱以减少重量。

5.Before the ship can enter the harbor, the crew must complete the deballasting procedure 排水程序 to ensure it is at the correct draft.

在船只进入港口之前，船员必须完成deballasting procedure 排水程序以确保船只达到正确的吃水线。

作文

The maritime industry is filled with specialized terms that are crucial for safe and efficient operations. One such term is the deballasting procedure, which refers to the process of removing ballast water from a ship's ballast tanks. This procedure is essential for maintaining the stability and safety of the vessel during its journey. Ballast water is used to stabilize ships, especially when they are not carrying cargo. However, when a ship approaches its destination or prepares for loading, it may need to remove this water to adjust its weight and balance. The deballasting procedure is not just a simple task; it involves careful planning and execution to ensure that the ship remains stable and compliant with environmental regulations. Ships typically carry ballast water to enhance their stability, but this water often contains various organisms and sediments that can be harmful if released into new environments. Therefore, the deballasting procedure must be conducted in accordance with international guidelines to prevent ecological damage. Before initiating the deballasting procedure, crew members must assess the ship's current stability and determine the appropriate amount of ballast water to be removed. This assessment is crucial because removing too much ballast can lead to instability, making the ship difficult to control. The crew must also consider the conditions of the sea, including wave height and wind direction, as these factors can affect the ship's performance during the deballasting procedure. Once the assessment is complete, the crew can begin the deballasting procedure by opening the valves that allow water to flow out of the ballast tanks. It's important to monitor the process closely, ensuring that the water is being discharged at a safe distance from the shore to minimize the risk of introducing invasive species into local waters. Many ships are now equipped with advanced systems that treat ballast water before it is discharged, further reducing the environmental impact of the deballasting procedure. After the deballasting procedure is completed, the crew will conduct a final check to ensure that the ship's stability is within acceptable limits. This involves recalibrating the ship's instruments and making any necessary adjustments to the cargo load. The entire process requires teamwork, expertise, and adherence to strict protocols to ensure safety and compliance with maritime laws. In conclusion, the deballasting procedure is a critical operation in the shipping industry that ensures the safety and stability of vessels while also protecting marine ecosystems. Understanding this procedure is vital for anyone involved in maritime operations, as it highlights the importance of balancing operational efficiency with environmental responsibility. As the industry continues to evolve, the deballasting procedure will remain a key focus for ship operators and regulatory bodies alike, ensuring that our oceans are protected for future generations.

海事行业充满了专业术语，这些术语对安全和高效的操作至关重要。其中一个术语是排水程序，指的是从船舶的压舱水舱中移除压舱水的过程。该程序对于在航行过程中保持船舶的稳定性和安全性至关重要。压舱水用于稳定船舶，尤其是在不载货时。然而，当船舶接近目的地或准备装货时，可能需要移除这些水，以调整其重量和平衡。排水程序不仅仅是一项简单的任务；它涉及到仔细的计划和执行，以确保船舶保持稳定，并符合环境法规。船舶通常携带压舱水以增强其稳定性，但这些水往往含有各种生物和沉积物，如果释放到新的环境中可能会造成危害。因此，排水程序必须根据国际指南进行，以防止生态损害。在启动排水程序之前，船员必须评估船舶当前的稳定性，并确定要移除的压舱水的适当数量。这一评估至关重要，因为移除过多的压舱水可能导致不稳定，使船舶难以控制。船员还必须考虑海洋条件，包括波浪高度和风向，因为这些因素会影响船舶在排水程序期间的性能。一旦评估完成，船员可以通过打开阀门开始排水程序，使水流出压舱水舱。密切监控这一过程非常重要，确保水在距离海岸安全的地方排放，以尽量减少将入侵物种引入当地水域的风险。许多船舶现在配备了先进的系统，在排放之前处理压舱水，进一步减少了排水程序的环境影响。在完成排水程序后，船员将进行最终检查，以确保船舶的稳定性在可接受的范围内。这涉及重新校准船舶的仪器，并对货物负载进行任何必要的调整。整个过程需要团队合作、专业知识和严格遵循协议，以确保安全并遵守海事法律。总之，排水程序是航运行业中的一项关键操作，确保船舶的安全和稳定，同时保护海洋生态系统。理解这一程序对任何参与海事操作的人来说都是至关重要的，因为它突显了在运营效率与环境责任之间保持平衡的重要性。随着行业的不断发展，排水程序将继续成为船舶运营商和监管机构关注的重点，确保我们的海洋为后代保护。