crank case diaphragm

简明释义

曲轴箱隔板

英英释义

例句

1.To ensure proper sealing, the crank case diaphragm must be installed correctly.

为了确保密封良好，曲轴箱膜必须正确安装。

2.The mechanic replaced the crank case diaphragm to prevent oil leaks.

机械师更换了曲轴箱膜以防止漏油。

3.A damaged crank case diaphragm can lead to poor engine performance.

损坏的曲轴箱膜可能导致发动机性能下降。

4.Always check the crank case diaphragm during routine maintenance.

在例行维护中始终检查曲轴箱膜。

5.The crank case diaphragm was found to be the source of the problem.

发现曲轴箱膜是问题的根源。

作文

The engine is a complex machine that requires various components to function efficiently. One of these crucial components is the crank case diaphragm, which plays a significant role in maintaining the proper functioning of the engine. The crank case diaphragm (曲轴箱隔膜) is a flexible membrane located within the crankcase, serving as a barrier between the crankcase and the external environment. Its primary purpose is to regulate the pressure within the crankcase, ensuring that it remains at optimal levels for engine performance.Understanding the function of the crank case diaphragm is essential for anyone interested in automotive mechanics. When the engine operates, it generates a considerable amount of pressure due to the combustion process. This pressure needs to be managed effectively to prevent any damage to the engine components. The crank case diaphragm helps in this regard by allowing excess pressure to escape while preventing contaminants from entering the crankcase.In addition to pressure regulation, the crank case diaphragm also plays a vital role in the overall efficiency of the engine. A properly functioning diaphragm ensures that the engine maintains a consistent oil flow, which is crucial for lubrication. Insufficient lubrication can lead to increased friction, overheating, and ultimately, engine failure. Therefore, the integrity of the crank case diaphragm is paramount for the longevity of the engine.Over time, the crank case diaphragm can wear out due to constant exposure to heat and pressure fluctuations. Regular maintenance checks are necessary to ensure that this component is in good condition. If a mechanic discovers that the diaphragm is damaged or compromised, it should be replaced immediately to avoid further complications. Ignoring the state of the crank case diaphragm can lead to severe issues such as oil leaks, decreased engine performance, and even complete engine failure.Moreover, advancements in technology have led to the development of more durable materials for manufacturing crank case diaphragms. These modern diaphragms are designed to withstand higher pressures and temperatures, thus enhancing the overall reliability of the engine. As engines become more efficient and powerful, the importance of components like the crank case diaphragm cannot be overstated.In conclusion, the crank case diaphragm (曲轴箱隔膜) is a critical component of an engine that contributes to its performance and longevity. Understanding its function and the importance of regular maintenance can help vehicle owners keep their engines running smoothly. By ensuring that the crank case diaphragm is in good condition, one can prevent potential engine problems and enjoy a more reliable driving experience. As we continue to innovate and improve automotive technology, components like the crank case diaphragm will remain essential in the quest for better engine performance and efficiency.

发动机是一个复杂的机器，需要各种组件高效运作。其中一个关键组件是曲轴箱隔膜，它在保持发动机正常运转中发挥着重要作用。曲轴箱隔膜是位于曲轴箱内的一个柔性膜，作为曲轴箱与外部环境之间的屏障。它的主要目的是调节曲轴箱内的压力，确保其保持在最佳水平，以便发动机性能良好。理解曲轴箱隔膜的功能对于任何对汽车机械感兴趣的人来说都是必不可少的。当发动机运转时，由于燃烧过程，它会产生相当大的压力。必须有效管理这种压力，以防止对发动机组件造成任何损害。曲轴箱隔膜在这方面起到了重要作用，它允许多余的压力释放，同时防止污染物进入曲轴箱。除了压力调节外，曲轴箱隔膜还在整体发动机效率中发挥着重要作用。正常运作的隔膜确保发动机保持一致的油流，这对于润滑至关重要。润滑不足会导致摩擦增加、过热，最终导致发动机故障。因此，曲轴箱隔膜的完整性对发动机的使用寿命至关重要。随着时间的推移，由于持续暴露于热量和压力波动中，曲轴箱隔膜可能会磨损。定期维护检查是必要的，以确保该组件处于良好状态。如果机械师发现隔膜受损或受到威胁，应立即更换，以避免进一步的并发症。忽视曲轴箱隔膜的状态可能导致严重的问题，如漏油、发动机性能下降，甚至完全的发动机故障。此外，科技进步使得制造曲轴箱隔膜的材料更加耐用。这些现代隔膜设计用于承受更高的压力和温度，从而增强发动机的整体可靠性。随着发动机变得更加高效和强大，像曲轴箱隔膜这样的组件的重要性不容小觑。总之，曲轴箱隔膜是发动机的一个关键组件，有助于其性能和使用寿命。理解其功能和定期维护的重要性可以帮助车辆拥有者保持发动机平稳运行。通过确保曲轴箱隔膜处于良好状态，可以防止潜在的发动机问题，享受更可靠的驾驶体验。随着我们继续创新和改善汽车技术，像曲轴箱隔膜这样的组件将在追求更好发动机性能和效率的过程中始终是不可或缺的。