continuous voltage-rise test

简明释义

持续升压试验

英英释义

例句

1.Before deployment, the product underwent a continuous voltage-rise test 连续电压升高测试 to ensure reliability under extreme conditions.

在部署之前，该产品经过了连续电压升高测试 连续电压升高测试以确保在极端条件下的可靠性。

2.A continuous voltage-rise test 连续电压升高测试 is crucial for identifying potential breakdown points in electrical components.

进行连续电压升高测试 连续电压升高测试对于识别电气元件中的潜在击穿点至关重要。

3.During the quality assurance phase, the team performed a continuous voltage-rise test 连续电压升高测试 on the new circuit design.

在质量保证阶段，团队对新电路设计进行了连续电压升高测试 连续电压升高测试。

4.The results from the continuous voltage-rise test 连续电压升高测试 indicated that the capacitor could handle higher voltages than expected.

来自连续电压升高测试 连续电压升高测试的结果表明电容器能够承受比预期更高的电压。

5.The engineer conducted a continuous voltage-rise test 连续电压升高测试 to evaluate the insulation strength of the transformer.

工程师进行了连续电压升高测试 连续电压升高测试以评估变压器的绝缘强度。

作文

In the field of electrical engineering, testing the reliability and performance of electrical equipment is crucial. One of the significant tests conducted is the continuous voltage-rise test, which plays a vital role in assessing the insulation strength of electrical devices. The continuous voltage-rise test is a method used to gradually increase the voltage applied to an electrical component until it reaches a predetermined level or until failure occurs. This test helps engineers determine the maximum voltage that the equipment can handle safely without breaking down or causing damage.The process of conducting a continuous voltage-rise test involves several steps. First, the equipment under test is connected to a voltage source. The initial voltage is set at a low level to ensure safety during the beginning stages of the test. As the test progresses, the voltage is slowly increased in increments. Engineers monitor the equipment's response to the rising voltage, looking for any signs of insulation breakdown or other failures.One of the primary benefits of the continuous voltage-rise test is its ability to simulate real-world conditions. Electrical equipment often experiences voltage fluctuations during operation, and this test allows engineers to see how the equipment will perform under such circumstances. Additionally, the gradual increase in voltage helps to identify weaknesses in the insulation that may not be apparent during standard testing procedures.Moreover, the continuous voltage-rise test is essential for ensuring compliance with industry standards and regulations. Many electrical devices must meet specific insulation resistance requirements to be deemed safe for use. By conducting this test, manufacturers can provide evidence that their products are reliable and safe for consumers. This not only protects users but also enhances the manufacturer's reputation in the market.However, it is important to note that the continuous voltage-rise test should be performed by trained professionals. Improper execution of the test can lead to accidents, equipment damage, or inaccurate results. Therefore, engineers must follow established protocols and safety guidelines to ensure the test is conducted correctly.In conclusion, the continuous voltage-rise test is a critical procedure in the electrical engineering field. It provides valuable insights into the performance and reliability of electrical equipment under increasing voltage conditions. By identifying potential weaknesses in insulation, this test helps manufacturers produce safer and more reliable products. As technology continues to evolve, the importance of such tests will only grow, making them an indispensable part of electrical engineering practices.

在电气工程领域，测试电气设备的可靠性和性能至关重要。其中一个重要的测试是连续电压升高测试，它在评估电气设备绝缘强度方面发挥着重要作用。连续电压升高测试是一种方法，用于逐渐增加施加到电气组件上的电压，直到达到预定水平或发生故障。这项测试帮助工程师确定设备可以安全承受的最大电压，而不会发生故障或造成损坏。进行连续电压升高测试的过程包括几个步骤。首先，将待测设备连接到电压源。初始电压设置在较低水平，以确保在测试开始阶段的安全。随着测试的进行，电压以增量方式缓慢增加。工程师监控设备对上升电压的响应，寻找绝缘击穿或其他故障的迹象。连续电压升高测试的主要好处之一是能够模拟现实条件。电气设备在运行过程中经常会经历电压波动，而此测试使工程师能够看到设备在这种情况下的表现。此外，电压的逐步增加有助于识别在标准测试程序中可能不明显的绝缘薄弱点。此外，连续电压升高测试对于确保符合行业标准和法规至关重要。许多电气设备必须满足特定的绝缘电阻要求，才能被认为是安全使用的。通过进行此测试，制造商可以提供证据，证明其产品是可靠且安全的。这不仅保护了用户，还增强了制造商在市场上的声誉。然而，需要注意的是，连续电压升高测试应由经过培训的专业人员执行。测试的不当执行可能导致事故、设备损坏或结果不准确。因此，工程师必须遵循既定的协议和安全指南，以确保测试的正确进行。总之，连续电压升高测试是电气工程领域的一项关键程序。它提供了关于电气设备在电压逐渐增加条件下的性能和可靠性的宝贵见解。通过识别绝缘中的潜在弱点，这项测试帮助制造商生产出更安全、更可靠的产品。随着技术的不断发展，此类测试的重要性只会增加，使其成为电气工程实践中不可或缺的一部分。