closed and pressured fuel system

简明释义

加压式燃油系统

英英释义

例句

1.During the inspection, we found a leak in the closed and pressured fuel system 封闭加压燃油系统, which could lead to serious safety hazards.

在检查过程中，我们发现封闭加压燃油系统 closed and pressured fuel system 有泄漏，这可能导致严重的安全隐患。

2.The technician explained that the closed and pressured fuel system 封闭加压燃油系统 is essential for maintaining engine efficiency.

技术员解释说，封闭加压燃油系统 closed and pressured fuel system 对于维持发动机效率至关重要。

3.The design of the closed and pressured fuel system 封闭加压燃油系统 helps prevent evaporation of fuel.

封闭加压燃油系统 closed and pressured fuel system 的设计有助于防止燃油蒸发。

4.The closed and pressured fuel system 封闭加压燃油系统 is designed to operate under high pressure to improve fuel delivery.

封闭加压燃油系统 closed and pressured fuel system 被设计为在高压下工作，以改善燃油输送。

5.To troubleshoot the engine, we need to check the closed and pressured fuel system 封闭加压燃油系统 for any blockages.

为了排查发动机故障，我们需要检查封闭加压燃油系统 closed and pressured fuel system 是否存在堵塞。

作文

In modern engineering, particularly in the automotive and aerospace industries, the efficiency and safety of fuel systems are paramount. One of the most critical advancements in these fields is the implementation of a closed and pressured fuel system. This system is designed to contain fuel within a sealed environment, preventing leaks and ensuring that the fuel remains at a specific pressure throughout its journey from the tank to the engine. The significance of this technology cannot be overstated, as it plays a vital role in enhancing performance while minimizing environmental impacts.A closed and pressured fuel system operates under the principle of maintaining a controlled environment for fuel. Unlike traditional open systems, where fuel can evaporate or leak into the atmosphere, a closed system ensures that all components are tightly sealed. This design not only reduces the risk of fuel loss but also minimizes the emission of harmful vapors. In an era where environmental concerns are at the forefront, such systems contribute significantly to reducing pollution and adhering to stringent regulations.Furthermore, the pressure aspect of the closed and pressured fuel system is crucial for optimizing fuel delivery. By maintaining fuel under pressure, the system can ensure a more efficient flow to the engine, allowing for better combustion and improved energy output. This is particularly important in high-performance vehicles, where every ounce of power matters. The ability to deliver fuel consistently and efficiently can mean the difference between a vehicle that performs well and one that falls short of expectations.The advantages of a closed and pressured fuel system extend beyond performance and environmental benefits. Safety is another critical factor. Fuel systems are often subjected to extreme conditions, including high temperatures and pressures. A closed system is less prone to catastrophic failures, such as explosions or fires, which can occur when fuel leaks into open areas. By containing the fuel within a pressurized environment, the risk of accidents is significantly reduced, providing peace of mind to both manufacturers and consumers.Moreover, the maintenance of a closed and pressured fuel system is generally easier compared to traditional systems. With fewer exposed components, there is less chance of contamination or wear and tear. This can lead to lower maintenance costs and longer service intervals, making it a cost-effective solution for both manufacturers and end-users. As technology continues to advance, we can expect to see even more innovations in fuel system designs that prioritize closure and pressure management.In conclusion, the closed and pressured fuel system represents a significant leap forward in fuel management technology. Its ability to enhance performance, reduce environmental impact, improve safety, and simplify maintenance makes it an essential component in modern engineering. As industries continue to evolve and face new challenges, such systems will undoubtedly play a crucial role in shaping the future of fuel efficiency and sustainability. Embracing these technologies will not only benefit manufacturers and consumers but also contribute to a healthier planet for generations to come.

在现代工程中，特别是在汽车和航空航天工业中，燃油系统的效率和安全性至关重要。这些领域的一项关键进展是实施封闭和加压燃油系统。该系统旨在将燃油保持在密封环境中，防止泄漏，并确保燃油在从油箱到发动机的整个过程中保持在特定压力下。这项技术的重要性不容小觑，因为它在提高性能的同时最小化环境影响方面发挥着至关重要的作用。封闭和加压燃油系统基于保持燃油受控环境的原则。与传统开放系统不同，开放系统可能会导致燃油蒸发或泄漏到大气中，而封闭系统确保所有组件都紧密密封。这种设计不仅减少了燃油损失的风险，还最小化了有害蒸汽的排放。在环境问题处于前沿的时代，这种系统显著有助于减少污染并遵守严格的法规。此外，封闭和加压燃油系统的压力方面对于优化燃油输送至关重要。通过保持燃油在压力下，系统可以确保更高效地流向发动机，从而改善燃烧和提高能量输出。这在高性能车辆中尤为重要，因为每一盎司的动力都是至关重要的。能够一致且高效地提供燃油可能意味着一辆车的性能好坏之间的差异。封闭和加压燃油系统的优势不仅限于性能和环境效益。安全性是另一个关键因素。燃油系统通常会受到极端条件的影响，包括高温和高压。封闭系统不易发生灾难性故障，例如爆炸或火灾，这可能发生在燃油泄漏到开放区域时。通过将燃油包含在加压环境中，事故的风险显著降低，为制造商和消费者提供了安心。此外，封闭和加压燃油系统的维护通常比传统系统更为简单。由于暴露的组件较少，因此被污染或磨损的机会也较少。这可能导致较低的维护成本和更长的服务间隔，使其成为制造商和最终用户的经济有效解决方案。随着技术的不断进步，我们可以期待在燃油系统设计中看到更多优先考虑封闭和压力管理的创新。总之，封闭和加压燃油系统代表了燃油管理技术的重大飞跃。它在提高性能、减少环境影响、改善安全性和简化维护等方面的能力使其成为现代工程中的重要组成部分。随着各行业的不断发展和面临新挑战，这些系统无疑将在塑造燃油效率和可持续性的未来中发挥重要作用。拥抱这些技术不仅将使制造商和消费者受益，也将为子孙后代创造一个更健康的地球。