capacity of tank

简明释义

舱容

英英释义

例句

1.Before purchasing a new fuel tank, check the capacity of tank to ensure it meets your needs.

在购买新的燃料罐之前，请检查容量以确保它满足您的需求。

2.The capacity of tank is crucial for determining how much water it can hold.

水箱的容量对于确定它能容纳多少水至关重要。

3.The capacity of tank was exceeded during the heavy rain, causing an overflow.

在大雨期间，水箱的容量被超过，导致溢出。

4.The engineer calculated the capacity of tank to optimize the design for better efficiency.

工程师计算了容量以优化设计以提高效率。

5.Understanding the capacity of tank helps in planning the water supply for the community.

了解容量有助于规划社区的供水。

作文

The importance of understanding the capacity of tank cannot be overstated, especially in fields such as engineering, environmental science, and even everyday life. The capacity of tank refers to the maximum volume that a tank can hold, whether it is a water tank, fuel tank, or any other type of container designed to store liquids or gases. Knowing the capacity of tank is crucial for various reasons, including efficiency, safety, and cost-effectiveness.In engineering, for instance, the capacity of tank plays a vital role in the design and construction of systems that require fluid storage. Engineers must calculate the optimal capacity of tank to ensure that the system operates effectively. For example, in a municipal water supply system, the capacity of tank must be sufficient to meet the demand of the population it serves, especially during peak usage times. If the capacity of tank is too small, it could lead to shortages and inadequate water supply, which can have severe consequences for public health and sanitation.Moreover, understanding the capacity of tank is essential for environmental management. Tanks are often used to store hazardous materials, and knowing their capacity of tank helps in preventing spills and leaks that can harm the environment. Regulatory agencies often set strict guidelines regarding the capacity of tank to ensure that tanks are not overfilled, which could lead to catastrophic failures. For instance, in the oil and gas industry, the capacity of tank is meticulously calculated to minimize the risk of spills that could devastate ecosystems.In our daily lives, we encounter situations where understanding the capacity of tank is necessary. Consider a scenario where you need to fill a swimming pool. Knowing the capacity of tank of your garden hose will help you estimate how long it will take to fill the pool. If the capacity of tank is not adequate, you might end up spending more time and resources than necessary. Similarly, when purchasing a vehicle, understanding the fuel tank's capacity of tank can influence your decision based on how far you can drive before needing to refuel.Furthermore, businesses that rely on large quantities of liquids, such as breweries or chemical plants, must pay close attention to the capacity of tank. A brewery, for instance, needs to ensure that its fermentation tanks have the right capacity of tank to produce the desired amount of beer without compromising quality. An incorrect capacity of tank could lead to production delays and financial losses.In conclusion, the capacity of tank is a fundamental concept that permeates various aspects of life and industry. Whether in engineering, environmental protection, or everyday activities, understanding the capacity of tank is crucial for making informed decisions. It ensures efficiency, enhances safety, and contributes to effective resource management. As we continue to innovate and develop new technologies, the significance of the capacity of tank will remain paramount, reminding us that even the simplest concepts can have profound implications in our world.

理解水箱的容量的重要性不容小觑，尤其是在工程、环境科学，甚至日常生活等领域。水箱的容量是指水箱可以容纳的最大体积，无论是水箱、燃料箱还是任何其他用于存储液体或气体的容器。了解水箱的容量对多种原因至关重要，包括效率、安全性和成本效益。例如，在工程学中，水箱的容量在需要液体存储的系统设计和建造中发挥着至关重要的作用。工程师必须计算最佳的水箱的容量以确保系统有效运行。例如，在市政供水系统中，水箱的容量必须足够满足其服务的人口需求，特别是在高峰使用时。如果水箱的容量过小，可能会导致短缺和不充分的水供应，这会对公共健康和卫生产生严重后果。此外，了解水箱的容量对于环境管理也至关重要。水箱通常用于存储危险材料，了解其水箱的容量有助于防止泄漏和溢出，从而保护环境。监管机构通常对水箱的容量设定严格的指导方针，以确保水箱不会被过度填充，这可能导致灾难性的故障。例如，在石油和天然气行业，水箱的容量经过精确计算，以最小化可能导致生态系统破坏的泄漏风险。在我们的日常生活中，我们遇到需要理解水箱的容量的情况。考虑一个需要填充游泳池的场景。知道花园水管的水箱的容量将帮助您估算填满游泳池需要多长时间。如果水箱的容量不足，您可能会花费更多的时间和资源。类似地，在购买车辆时，了解油箱的水箱的容量可以影响您的决定，因为这关系到您在需要加油之前能开多远。此外，依赖大量液体的企业，如酿酒厂或化工厂，必须密切关注水箱的容量。例如，酿酒厂需要确保其发酵罐具有合适的水箱的容量以生产所需数量的啤酒，而不影响质量。不正确的水箱的容量可能导致生产延误和经济损失。总之，水箱的容量是一个基本概念，贯穿生活和工业的各个方面。无论是在工程、环境保护还是日常活动中，了解水箱的容量对于做出明智的决策至关重要。它确保了效率，提高了安全性，并有助于有效的资源管理。随着我们继续创新和开发新技术，水箱的容量的重要性将继续存在，提醒我们即使是最简单的概念也可能对我们的世界产生深远的影响。