bridge gauge value

简明释义

桥规值

英英释义

例句

1.The bridge gauge value was found to be within acceptable limits during the inspection.

在检查中发现桥梁标尺值在可接受的范围内。

2.Regular monitoring of the bridge gauge value helps in maintaining the integrity of the bridge.

定期监测桥梁标尺值有助于维护桥梁的完整性。

3.Before the race, the team checked the bridge gauge value of the track for safety.

比赛前，团队检查了赛道的桥梁标尺值以确保安全。

4.Adjustments were made based on the bridge gauge value readings taken last week.

根据上周的桥梁标尺值读数进行了调整。

5.The engineer measured the bridge gauge value to ensure the structure could support heavy vehicles.

工程师测量了桥梁标尺值以确保结构能够支撑重型车辆。

作文

The concept of bridge gauge value is crucial in the field of civil engineering, particularly when it comes to the design and maintenance of bridges. The term refers to the measurement that determines the maximum height and width of vehicles that can safely pass under a bridge without causing any damage. Understanding the bridge gauge value is essential for ensuring that transportation systems remain efficient and safe for all users.When engineers design a bridge, they must take into account various factors, including the expected traffic load, environmental conditions, and the types of vehicles that will use the bridge. The bridge gauge value plays a significant role in these considerations. For instance, if a bridge has a low bridge gauge value, it may restrict larger vehicles such as trucks and buses from passing through. This restriction can lead to increased travel times and detours, affecting the overall efficiency of the transportation network.Moreover, the bridge gauge value is not only relevant during the construction phase but also during the life cycle of the bridge. Regular inspections are necessary to ensure that the bridge remains compliant with its designated bridge gauge value. Over time, factors such as settlement, structural wear, or modifications to the surrounding infrastructure can affect the effective gauge of the bridge. Engineers must be vigilant in monitoring these changes to prevent accidents and maintain safety standards.In addition to its practical implications, the bridge gauge value also has economic consequences. Bridges that cannot accommodate larger vehicles may limit access to certain areas, impacting businesses and local economies. Conversely, bridges designed with an appropriate bridge gauge value can facilitate commerce and improve connectivity between regions. Therefore, understanding and properly implementing the bridge gauge value is vital for urban planning and development.Furthermore, the bridge gauge value is often communicated to the public through signage. Clear indicators of height and width restrictions help drivers make informed decisions about their routes. These signs serve as a reminder of the importance of adhering to the bridge gauge value, as ignoring these limits can lead to serious accidents and damage to both vehicles and infrastructure.In conclusion, the bridge gauge value is a fundamental aspect of bridge engineering that impacts safety, efficiency, and economic viability. It is imperative for engineers, planners, and policymakers to understand this concept thoroughly to ensure the longevity and functionality of our transportation systems. By prioritizing the bridge gauge value in bridge design and maintenance, we can create safer and more efficient routes for all users, ultimately enhancing the quality of life in our communities.

“桥梁标高值”这一概念在土木工程领域至关重要，尤其是在桥梁的设计和维护方面。该术语指的是测量值，用于确定能够安全通过桥梁而不会造成任何损坏的车辆的最大高度和宽度。理解“桥梁标高值”对于确保交通系统对所有用户保持高效和安全至关重要。当工程师设计一座桥时，他们必须考虑各种因素，包括预期的交通负荷、环境条件以及将使用桥梁的车辆类型。“桥梁标高值”在这些考虑中起着重要作用。例如，如果一座桥的“桥梁标高值”较低，它可能会限制大型车辆如卡车和公共汽车通过。这种限制可能导致旅行时间增加和绕行，从而影响整个交通网络的效率。此外，“桥梁标高值”不仅在建设阶段相关，在桥梁的生命周期中也同样重要。定期检查是必要的，以确保桥梁仍然符合其指定的“桥梁标高值”。随着时间的推移，沉降、结构磨损或周围基础设施的改动等因素可能会影响桥梁的有效标高。工程师必须保持警惕，监测这些变化，以防止事故并维护安全标准。除了实际影响外，“桥梁标高值”还具有经济后果。无法容纳大型车辆的桥梁可能会限制某些区域的通行，影响商业和地方经济。相反，设计有适当“桥梁标高值”的桥梁可以促进商业活动，并改善地区之间的连接。因此，理解和正确实施“桥梁标高值”对城市规划和发展至关重要。此外，“桥梁标高值”通常通过标志向公众传达。清晰的高度和宽度限制指示帮助驾驶员做出明智的路线选择。这些标志提醒人们遵守“桥梁标高值”的重要性，因为忽视这些限制可能会导致严重的事故和对车辆及基础设施的损坏。总之，“桥梁标高值”是桥梁工程的基本方面，影响安全性、效率和经济可行性。工程师、规划者和政策制定者必须彻底理解这一概念，以确保我们的交通系统的持久性和功能性。通过在桥梁设计和维护中优先考虑“桥梁标高值”，我们可以为所有用户创造更安全、更高效的通行路线，最终提升我们社区的生活质量。