breakdown torque

简明释义

崩溃转矩

英英释义

例句

1.To ensure safety, it's crucial to know the breakdown torque of the machinery used in the factory.

为了确保安全，了解工厂中使用的机器的失效扭矩至关重要。

2.During testing, the team observed that the breakdown torque was significantly lower than expected.

在测试过程中，团队观察到失效扭矩明显低于预期。

3.Understanding the breakdown torque helps engineers design more efficient systems.

理解失效扭矩有助于工程师设计更高效的系统。

4.The engineer calculated the breakdown torque to determine the maximum load the motor could handle before failure.

工程师计算了失效扭矩以确定电机在故障前能承受的最大负载。

5.The specifications sheet included the breakdown torque for each component to aid in assembly.

规格表中包含了每个组件的失效扭矩以帮助组装。

作文

Understanding the concept of breakdown torque is crucial for engineers and technicians working with electric motors and machinery. In simple terms, breakdown torque refers to the maximum torque that a motor can produce before it stalls or fails to maintain its rotational speed. This is an important parameter because it helps in determining the load that a motor can handle without risking damage or inefficiency.When designing a system that involves electric motors, knowing the breakdown torque is essential. It allows engineers to select the right motor for specific applications. For instance, if a motor is required to drive a conveyor belt that carries heavy loads, the motor must have a breakdown torque that exceeds the torque needed to move the heaviest load on the belt. If the selected motor does not meet this requirement, it may stall under load, leading to operational downtime and potential damage to the motor itself.Moreover, the breakdown torque is not a static value; it can vary based on several factors, including the motor design, operating conditions, and the type of load being driven. For example, a motor operating at high temperatures may experience a decrease in breakdown torque, which could affect its performance. Therefore, understanding the specific conditions under which a motor operates is vital for accurately assessing its breakdown torque.In practical applications, the breakdown torque is often determined through testing. Engineers will typically run the motor at various speeds while gradually increasing the load until the motor can no longer maintain its speed. The point at which this occurs is recorded as the breakdown torque. This testing process is critical because it ensures that the motor can perform reliably under expected operating conditions.Additionally, the relationship between breakdown torque and other torque values, such as starting torque and running torque, is also significant. Starting torque is the amount of torque needed to start the motor from a standstill, while running torque is the torque required to keep the motor running at its rated speed. Understanding these relationships helps engineers design systems that maximize efficiency and minimize wear and tear on the motor.In conclusion, breakdown torque is a fundamental concept in the field of electrical engineering and motor design. It plays a vital role in ensuring that motors operate effectively and efficiently under a variety of conditions. By grasping the significance of breakdown torque and how it interacts with other parameters, engineers can make informed decisions when selecting and applying motors in their designs. This understanding ultimately leads to improved performance, reliability, and longevity of the machinery involved, benefiting both manufacturers and end-users alike.

理解breakdown torque的概念对于从事电动机和机械工作的工程师和技术人员至关重要。简单来说，breakdown torque指的是电动机在停转或无法维持旋转速度之前能够产生的最大扭矩。这是一个重要的参数，因为它有助于确定电动机可以承受的负载，而不冒着损坏或低效的风险。在设计涉及电动机的系统时，了解breakdown torque是必不可少的。它使工程师能够为特定应用选择合适的电动机。例如，如果需要一个电动机来驱动一个承载重物的输送带，则该电动机必须具有超过移动输送带上最重负载所需扭矩的breakdown torque。如果所选电动机不满足这一要求，它可能在负载下停转，从而导致操作停机和潜在的电动机损坏。此外，breakdown torque不是一个静态值；它可能会根据多个因素而变化，包括电动机设计、操作条件和驱动负载的类型。例如，在高温下运行的电动机可能会经历breakdown torque的下降，这可能影响其性能。因此，了解电动机运行的特定条件对于准确评估其breakdown torque至关重要。在实际应用中，breakdown torque通常通过测试确定。工程师通常会在不同速度下运行电动机，同时逐渐增加负载，直到电动机无法维持其速度为止。此时记录的点被称为breakdown torque。这个测试过程至关重要，因为它确保电动机在预期的操作条件下可靠运行。此外，breakdown torque与其他扭矩值之间的关系，如启动扭矩和运行扭矩，也是重要的。启动扭矩是使电动机从静止状态启动所需的扭矩，而运行扭矩是保持电动机以额定速度运行所需的扭矩。理解这些关系有助于工程师设计最大化效率并最小化电动机磨损的系统。总之，breakdown torque是电气工程和电动机设计领域的基本概念。它在确保电动机在各种条件下有效且高效地运行方面发挥着至关重要的作用。通过掌握breakdown torque的重要性及其与其他参数的相互作用，工程师可以在选择和应用电动机时做出明智的决策。这种理解最终将提高机器的性能、可靠性和使用寿命，使制造商和最终用户都受益。