breakdown strength

简明释义

击穿强度

英英释义

例句

1.The breakdown strength of the cable was insufficient for the load it was carrying.

电缆的断裂强度不足以承受它所承载的负荷。

2.The material's breakdown strength is crucial for ensuring the safety of the structure.

材料的断裂强度对于确保结构的安全性至关重要。

3.Engineers must consider the breakdown strength of components when designing machinery.

工程师在设计机械时必须考虑部件的断裂强度。

4.In this test, we will measure the breakdown strength of various metals under stress.

在这个测试中，我们将测量各种金属在压力下的断裂强度。

5.A higher breakdown strength usually indicates better durability of the material.

更高的断裂强度通常表明材料的耐久性更好。

作文

Understanding the concept of breakdown strength is crucial in various fields, especially in engineering and materials science. Breakdown strength refers to the maximum stress that a material can withstand before it fails or breaks down. This property is essential for engineers and designers when selecting materials for construction, manufacturing, and other applications. For instance, in civil engineering, the breakdown strength of concrete determines how much load a structure can support without collapsing. If the material's strength is underestimated, it could lead to catastrophic failures, endangering lives and causing significant financial loss.In addition to civil engineering, breakdown strength is also a critical factor in the aerospace industry. Aircraft components must be designed to endure extreme conditions, including high stress and temperature variations. Engineers perform rigorous testing to ensure that the materials used have adequate breakdown strength to handle the forces experienced during flight. Any failure in this regard could result in disastrous consequences, making it imperative to understand and apply the principles of breakdown strength accurately.Moreover, the concept of breakdown strength extends beyond traditional engineering domains. In the field of electronics, for example, the breakdown strength of insulating materials is vital for ensuring the safety and reliability of electrical devices. Insulators must have a high breakdown strength to prevent electrical short circuits and failures. Engineers often select materials based on their breakdown strength to create safer and more efficient electronic products.To illustrate the importance of breakdown strength, consider the case of a bridge. Engineers must calculate the expected loads, including traffic, environmental factors, and potential natural disasters. They then select materials with a breakdown strength that exceeds these calculated loads to ensure the bridge's safety and longevity. Failure to do so could result in structural failure, leading to accidents and loss of life.In conclusion, breakdown strength is a fundamental property that plays a critical role in the design and application of materials across various industries. Understanding its implications helps engineers make informed decisions, ultimately leading to safer and more reliable structures and products. As technology advances, the need for materials with higher breakdown strength continues to grow, pushing the boundaries of what is possible in engineering and design. Therefore, it is essential for professionals in these fields to continually study and understand the factors that influence breakdown strength to innovate and improve the safety and performance of their projects.

理解破坏强度的概念在各个领域都至关重要，尤其是在工程和材料科学中。破坏强度指的是材料在失败或破裂之前能够承受的最大应力。这一特性对工程师和设计师在选择建筑、制造及其他应用材料时至关重要。例如，在土木工程中，混凝土的破坏强度决定了结构能够支持的负载而不至于倒塌。如果低估了材料的强度，可能会导致灾难性的故障，危及生命并造成重大经济损失。除了土木工程，破坏强度在航空航天工业中也是一个关键因素。飞机组件必须设计成能够承受极端条件，包括高应力和温度变化。工程师进行严格测试，以确保所用材料具有足够的破坏强度来应对飞行过程中经历的力量。在这方面的任何失败都可能导致灾难性的后果，因此准确理解和应用破坏强度的原理是至关重要的。此外，破坏强度的概念超越了传统工程领域。在电子学领域，例如，绝缘材料的破坏强度对于确保电气设备的安全性和可靠性至关重要。绝缘体必须具有高破坏强度以防止电气短路和故障。工程师通常根据材料的破坏强度来选择材料，以创造更安全、更高效的电子产品。为了说明破坏强度的重要性，可以考虑一座桥梁的案例。工程师必须计算预期负载，包括交通、环境因素和潜在自然灾害。然后，他们选择破坏强度超过这些计算负载的材料，以确保桥梁的安全性和耐久性。如果不这样做，可能会导致结构故障，导致事故和生命损失。总之，破坏强度是一个基本属性，在各个行业的材料设计和应用中发挥着关键作用。理解其影响有助于工程师做出明智的决策，最终导致更安全、更可靠的结构和产品。随着技术的进步，对更高破坏强度材料的需求不断增长，推动了工程和设计的可能性。因此，对于这些领域的专业人士来说，不断研究和理解影响破坏强度的因素是必要的，以创新和改善他们项目的安全性和性能。