boiler clearane

简明释义

锅炉间隔

英英释义

例句

1.If the boiler clearance (锅炉间隙) is too tight, it may lead to operational issues.

如果boiler clearance (锅炉间隙)太紧，可能会导致操作问题。

2.The technician noted that the boiler clearance (锅炉间隙) was not sufficient for proper ventilation.

技术人员注意到boiler clearance (锅炉间隙)不足以保证适当的通风。

3.During the inspection, the engineer measured the boiler clearance (锅炉间隙) to comply with safety regulations.

在检查期间，工程师测量了boiler clearance (锅炉间隙)以符合安全规定。

4.It's crucial to maintain the correct boiler clearance (锅炉间隙) to prevent overheating.

保持正确的boiler clearance (锅炉间隙)对防止过热至关重要。

5.Before starting the maintenance work, we need to check the boiler clearance (锅炉间隙) to ensure safety.

在开始维护工作之前，我们需要检查一下boiler clearance (锅炉间隙)以确保安全。

作文

The term boiler clearance refers to the necessary space around a boiler to ensure safe operation and maintenance. In industrial settings, where large boilers are used to generate steam or heat, understanding boiler clearance is crucial for safety and efficiency. Adequate clearance allows for proper ventilation, reduces the risk of overheating, and provides enough room for technicians to perform maintenance tasks. When designing a facility that incorporates a boiler system, engineers must consider various factors that influence boiler clearance. These include the size of the boiler, the type of fuel used, and the specific regulations set forth by local authorities. For instance, gas-fired boilers may require different clearance specifications compared to oil-fired ones. Additionally, the layout of the surrounding area, including walls, pipes, and other equipment, must be taken into account to prevent potential hazards.In many cases, manufacturers provide guidelines on the minimum boiler clearance required for their products. These guidelines are based on extensive testing and are designed to ensure that the boiler operates safely and efficiently. Following these recommendations is essential, as insufficient clearance can lead to dangerous situations, such as fires or explosions. Furthermore, it can hinder the performance of the boiler, leading to increased energy consumption and higher operating costs.Another important aspect of boiler clearance is its impact on maintenance schedules. Regular inspections and servicing are vital for keeping a boiler in optimal condition. If there is not enough clearance, technicians may struggle to access critical components, resulting in delayed maintenance and potential breakdowns. This can ultimately affect the overall productivity of the facility, as a malfunctioning boiler can cause significant downtime.Moreover, understanding boiler clearance is not only relevant for industrial applications but also for residential heating systems. Homeowners who install boilers must ensure that there is adequate space around the unit for both safety and efficiency. Failure to do so can lead to issues such as carbon monoxide buildup, which poses serious health risks. Therefore, it is crucial for homeowners to consult with professionals during the installation process to determine the appropriate boiler clearance needed for their specific situation.In conclusion, boiler clearance plays a vital role in the safe and efficient operation of boiler systems, whether in industrial or residential settings. By adhering to recommended clearance guidelines, facility managers and homeowners can ensure that their boilers function properly while minimizing risks. It is essential to prioritize boiler clearance in any planning or maintenance activities related to boilers to promote safety and efficiency in heating systems.

短语boiler clearance指的是锅炉周围所需的空间，以确保安全操作和维护。在工业环境中，大型锅炉用于产生蒸汽或热量，理解boiler clearance对安全和效率至关重要。充足的间隙可以保证适当的通风，降低过热的风险，并为技术人员提供足够的空间进行维护任务。在设计包含锅炉系统的设施时，工程师必须考虑影响boiler clearance的各种因素。这些因素包括锅炉的大小、使用的燃料类型以及当地当局制定的具体法规。例如，燃气锅炉可能需要与油锅炉不同的间隙规范。此外，周围区域的布局，包括墙壁、管道和其他设备，必须考虑在内，以防止潜在的危险。在许多情况下，制造商会提供其产品所需的最小boiler clearance指南。这些指南基于广泛的测试，旨在确保锅炉安全高效地运行。遵循这些建议至关重要，因为不足的间隙可能导致危险情况，例如火灾或爆炸。此外，它可能会阻碍锅炉的性能，导致能耗增加和更高的运营成本。boiler clearance的另一个重要方面是其对维护计划的影响。定期检查和服务对于保持锅炉处于最佳状态至关重要。如果没有足够的间隙，技术人员可能难以接触到关键组件，从而导致维护延误和潜在故障。这最终会影响设施的整体生产力，因为故障的锅炉可能导致显著的停机时间。此外，理解boiler clearance不仅与工业应用相关，也与住宅供暖系统有关。安装锅炉的房主必须确保锅炉周围有足够的空间，以确保安全和效率。如果不这样做，可能会导致一氧化碳积聚等问题，这会带来严重的健康风险。因此，在安装过程中，房主咨询专业人士以确定其特定情况所需的适当boiler clearance是至关重要的。总之，boiler clearance在锅炉系统的安全和高效运行中起着至关重要的作用，无论是在工业还是住宅环境中。通过遵循推荐的间隙指南，设施管理人员和房主可以确保他们的锅炉正常运行，同时将风险降至最低。在与锅炉相关的任何规划或维护活动中，优先考虑boiler clearance对于促进供暖系统的安全和效率至关重要。