ceiling voltage

简明释义

最高电压

英英释义

例句

1.To ensure safety, always monitor the ceiling voltage 上限电压 during charging cycles.

为了确保安全，在充电周期中始终监测上限电压。

2.The ceiling voltage 上限电压 determines the maximum energy capacity of the device.

设备的最大能量容量由上限电压决定。

3.The battery's ceiling voltage 上限电压 is set to prevent overcharging.

电池的上限电压被设定以防止过充。

4.In our experiments, we observed that exceeding the ceiling voltage 上限电压 resulted in thermal runaway.

在我们的实验中，我们观察到超过上限电压会导致热失控。

5.The manufacturer specifies a ceiling voltage 上限电压 of 4.2V for the lithium-ion cells.

制造商为锂离子电池单元指定了4.2V的上限电压。

作文

In the realm of electronics and electrical engineering, understanding various terminologies is crucial for both professionals and students alike. One such term that often comes up in discussions about circuit design and power management is ceiling voltage. The concept of ceiling voltage refers to the maximum voltage level that a component or system can handle without experiencing failure or degradation in performance. This term is particularly relevant when discussing components such as capacitors, transistors, and integrated circuits, which have specific voltage ratings that must not be exceeded to ensure reliability and efficiency.When designing electronic circuits, engineers must take into account the ceiling voltage of each component to avoid damage. Exceeding this voltage can lead to catastrophic failures, including short circuits, overheating, and even explosions in extreme cases. For instance, if a capacitor has a ceiling voltage of 50 volts, applying 60 volts across it could result in the dielectric breakdown of the capacitor, rendering it useless and potentially damaging other components in the circuit.Moreover, understanding the ceiling voltage is essential when considering safety standards and regulations. Many industries have strict guidelines regarding the maximum allowable voltages in their products to ensure user safety and prevent accidents. For example, in consumer electronics, devices are designed to operate safely within specific voltage ranges, and the ceiling voltage is a critical factor in determining these limits. Manufacturers often label their products with voltage ratings to inform users of the maximum voltage that should be applied, thereby promoting safe usage practices.In addition to safety considerations, the ceiling voltage also plays a significant role in the performance characteristics of electronic devices. Components are often designed to operate optimally at certain voltage levels, and exceeding the ceiling voltage can lead to performance issues such as signal distortion, reduced efficiency, and increased power consumption. For instance, in audio amplifiers, operating beyond the ceiling voltage can cause clipping in the output signal, resulting in poor sound quality.Furthermore, the ceiling voltage can vary depending on the operating conditions and the specific application of the component. Factors such as temperature, frequency, and load can influence the effective ceiling voltage of a component. Therefore, engineers must consider these variables during the design process to ensure that the components will function reliably under all expected conditions.In conclusion, the term ceiling voltage encompasses a critical aspect of electronic design and safety. It signifies the maximum voltage that components can withstand without risking failure, and understanding this concept is vital for anyone involved in electronics. By adhering to the specified ceiling voltage ratings, engineers can design safer, more efficient, and reliable electronic systems that meet both performance and safety standards. Ultimately, a thorough grasp of the ceiling voltage not only enhances the longevity of electronic devices but also safeguards users from potential hazards associated with electrical failures.

在电子和电气工程领域，理解各种术语对于专业人士和学生来说至关重要。一个经常在电路设计和电源管理讨论中出现的术语是ceiling voltage。ceiling voltage的概念指的是一个组件或系统在不发生故障或性能退化的情况下能够承受的最大电压水平。这个术语在讨论电容器、晶体管和集成电路等组件时特别相关，这些组件都有特定的电压额定值，必须不超过这些值以确保可靠性和效率。在设计电子电路时，工程师必须考虑每个组件的ceiling voltage以避免损坏。超过这个电压可能导致灾难性的故障，包括短路、过热，甚至在极端情况下发生爆炸。例如，如果一个电容器的ceiling voltage为50伏，施加60伏的电压可能导致电容器的介质击穿，使其失效，并可能损坏电路中的其他组件。此外，理解ceiling voltage对于考虑安全标准和法规也至关重要。许多行业对其产品的最大允许电压有严格的指导方针，以确保用户安全并防止事故。例如，在消费电子产品中，设备被设计为在特定电压范围内安全运行，而ceiling voltage是确定这些限制的关键因素。制造商通常会在产品上标注电压等级，以告知用户应施加的最大电压，从而促进安全使用实践。除了安全考虑，ceiling voltage在电子设备的性能特征中也发挥着重要作用。组件通常被设计为在某些电压水平下最佳工作，超过ceiling voltage可能导致性能问题，例如信号失真、效率降低和功耗增加。例如，在音频放大器中，超出ceiling voltage的操作可能导致输出信号的削波，从而导致音质差。此外，ceiling voltage可能会根据操作条件和组件的具体应用而有所不同。温度、频率和负载等因素可能影响组件的有效ceiling voltage。因此，工程师在设计过程中必须考虑这些变量，以确保组件在所有预期条件下都能可靠运行。总之，术语ceiling voltage涵盖了电子设计和安全的一个关键方面。它表示组件可以承受的最大电压，而不会冒失败的风险，理解这一概念对于任何参与电子设备的人来说都是至关重要的。通过遵循规定的ceiling voltage等级，工程师可以设计出更安全、更高效和更可靠的电子系统，以满足性能和安全标准。最终，充分掌握ceiling voltage不仅可以延长电子设备的使用寿命，还可以保护用户免受与电气故障相关的潜在危害。