bleed-off passage

简明释义

抽气道

英英释义

例句

1.During the maintenance check, we found that the bleed-off passage was clogged, causing pressure buildup.

在维护检查中，我们发现排放通道被堵塞，导致压力积聚。

2.We installed a new filter at the bleed-off passage to prevent contaminants from entering the system.

我们在排放通道安装了一个新过滤器，以防止污染物进入系统。

3.The engineer designed a bleed-off passage to ensure the excess fluid could be safely released from the system.

工程师设计了一个排放通道，以确保多余的液体可以安全地从系统中释放。

4.Properly maintaining the bleed-off passage is crucial for the safety of the entire system.

妥善维护排放通道对于整个系统的安全至关重要。

5.The bleed-off passage allows for the removal of unwanted gases in the pipeline.

这个排放通道允许在管道中排除不需要的气体。

作文

In the realm of engineering and fluid dynamics, the term bleed-off passage refers to a specific channel or route that allows for the controlled release of fluid from a system. This concept is crucial in various applications, particularly in hydraulic systems, where maintaining optimal pressure is essential for efficient operation. A bleed-off passage can help prevent overpressure situations, ensuring that machinery operates safely and effectively. One common example of a bleed-off passage is found in aircraft hydraulic systems. These systems rely on pressurized fluids to operate critical components such as landing gear and flight control surfaces. If the pressure within the hydraulic system becomes too high, it can lead to catastrophic failures. Therefore, engineers design bleed-off passages that allow excess fluid to escape, thereby regulating the pressure and maintaining system integrity.Moreover, bleed-off passages are not only limited to hydraulic systems but are also prevalent in various industries, including automotive, aerospace, and manufacturing. For instance, in the automotive sector, a bleed-off passage can be incorporated into brake systems. When the brakes are applied, hydraulic fluid is pressurized to engage the brake pads. However, if there is an excessive buildup of pressure, the bleed-off passage allows some of the fluid to escape, preventing brake failure and enhancing safety.The design and implementation of a bleed-off passage require careful consideration of several factors. Engineers must take into account the flow rates, pressure differentials, and the characteristics of the fluid being used. The passage must be adequately sized to handle the maximum expected flow without causing turbulence or cavitation, which could compromise the system's performance.In addition to safety considerations, bleed-off passages can also improve the efficiency of a system. By allowing for the optimal release of pressure, these passages can enhance the responsiveness of hydraulic systems, making them more effective in their intended functions. This is particularly important in applications where precision and speed are critical, such as in robotics or automated manufacturing processes.In conclusion, the concept of a bleed-off passage plays a vital role in the design and operation of fluid systems across various industries. By facilitating the controlled release of pressure, these passages contribute to the safety, reliability, and efficiency of hydraulic systems. As technology continues to advance, the importance of understanding and implementing effective bleed-off passages will only grow, highlighting the need for ongoing research and innovation in this field.

在工程和流体动力学领域，术语bleed-off passage指的是允许系统中流体受控释放的特定通道或路线。这个概念在各种应用中至关重要，特别是在液压系统中，保持最佳压力对于高效运行至关重要。bleed-off passage可以帮助防止过压情况，确保机械安全有效地运行。一个常见的例子是在飞机液压系统中。这些系统依赖于加压流体来操作关键组件，如起落架和飞行控制面。 如果液压系统内的压力过高，可能会导致灾难性故障。因此，工程师设计了bleed-off passage，使多余的流体得以逸出，从而调节压力并维持系统完整性。此外，bleed-off passage不仅限于液压系统，而且在汽车、航空航天和制造等各个行业中也很普遍。例如，在汽车行业中，bleed-off passage可以融入制动系统。当踩下刹车时，液压流体被加压以使刹车片接合。然而，如果压力过度积聚，bleed-off passage允许一些流体逸出，防止刹车失灵并增强安全性。bleed-off passage的设计和实施需要仔细考虑多个因素。工程师必须考虑流量、压力差和所使用流体的特性。通道的尺寸必须足够大，以处理最大预期流量，而不会造成湍流或气蚀，这可能会影响系统性能。除了安全考虑外，bleed-off passage还可以提高系统的效率。通过允许最佳释放压力，这些通道可以增强液压系统的响应能力，使其在预期功能中更为有效。在精度和速度至关重要的应用中，例如机器人或自动化制造过程中，这一点尤为重要。总之，bleed-off passage的概念在各个行业液体系统的设计和运行中发挥着至关重要的作用。通过促进压力的受控释放，这些通道有助于液压系统的安全性、可靠性和效率。随着技术的不断进步，理解和实施有效的bleed-off passage的重要性只会增加，这突显了在该领域持续研究和创新的必要性。