bilge-diagonal offset ratio

简明释义

舭斜剖线截距比

英英释义

例句

1.The captain emphasized the importance of monitoring the bilge-diagonal offset ratio regularly.

船长强调了定期监测舷侧对角偏移比的重要性。

2.The engineer calculated the bilge-diagonal offset ratio to ensure the stability of the vessel during its design phase.

工程师计算了舷侧对角偏移比以确保船只在设计阶段的稳定性。

3.Adjusting the bilge-diagonal offset ratio can significantly affect the ship's performance in rough seas.

调整舷侧对角偏移比可以显著影响船只在恶劣海况下的表现。

4.A lower bilge-diagonal offset ratio is often preferred for faster vessels.

较低的舷侧对角偏移比通常更受快速船只的青睐。

5.During the inspection, we noted that the bilge-diagonal offset ratio was not within the recommended limits.

在检查中，我们注意到舷侧对角偏移比不在推荐范围内。

作文

Understanding the concept of bilge-diagonal offset ratio is essential for professionals working in naval architecture and marine engineering. This term refers to the relationship between the bilge, which is the lowest part of a ship's hull where water can accumulate, and the diagonal measurements taken from this point to various structural components of the vessel. The bilge-diagonal offset ratio is crucial for determining the stability and buoyancy of a ship, as it influences how the vessel behaves in different sea conditions.In practical terms, the bilge-diagonal offset ratio can be calculated by measuring the distance from the bilge to a specific point on the ship's hull, such as the center of gravity or the waterline, and comparing it to the diagonal distance across the hull at that same level. This ratio provides insights into how weight distribution affects the vessel's performance. A lower ratio may indicate a more stable design, while a higher ratio could suggest potential issues with balance and stability.Naval architects often use the bilge-diagonal offset ratio in the design phase of a ship to ensure that it meets safety standards and performance expectations. By analyzing this ratio, they can make informed decisions about the placement of heavy machinery, cargo, and other critical components. For instance, if the ratio is found to be too high, adjustments can be made to redistribute weight or modify the hull shape to enhance stability.Moreover, understanding the bilge-diagonal offset ratio is also important during the operational phase of a vessel. As ships take on cargo, change their load, or experience shifts in water levels, the bilge area and its relation to the rest of the ship can change significantly. Mariners must be aware of these changes and how they affect the overall stability of the vessel. Regular assessments of the bilge-diagonal offset ratio can help identify potential risks before they lead to serious problems at sea.In conclusion, the bilge-diagonal offset ratio is a fundamental concept in maritime engineering that plays a vital role in ensuring the safety and efficiency of vessels. By understanding and applying this ratio, naval architects and marine engineers can design ships that not only meet regulatory requirements but also perform reliably under various conditions. As the maritime industry continues to evolve, the importance of precise measurements like the bilge-diagonal offset ratio will only grow, underscoring the need for ongoing research and innovation in this field.

理解bilge-diagonal offset ratio的概念对于从事船舶设计和海洋工程的专业人士来说至关重要。这个术语指的是船体最低部分（即舱底）与从该点到船只各个结构组件的对角线测量之间的关系。bilge-diagonal offset ratio对于确定船只的稳定性和浮力至关重要，因为它影响着船只在不同海况下的表现。在实际应用中，bilge-diagonal offset ratio可以通过测量从舱底到船体特定点（如重心或水线）的距离，并将其与该水平面上的对角线距离进行比较来计算。这个比率提供了有关重量分布如何影响船只性能的洞察。较低的比率可能表明设计更为稳定，而较高的比率则可能暗示平衡和稳定性方面的潜在问题。船舶设计师通常在船舶设计阶段使用bilge-diagonal offset ratio来确保船舶符合安全标准和性能期望。通过分析这个比率，他们可以就重型机械、货物和其他关键组件的放置做出明智的决策。例如，如果发现比率过高，可以调整以重新分配重量或修改船体形状以增强稳定性。此外，理解bilge-diagonal offset ratio在船舶的操作阶段也很重要。当船只装载货物、改变负载或经历水位变化时，舱底区域及其与船只其余部分的关系可能会发生显著变化。船员必须意识到这些变化以及它们如何影响船只的整体稳定性。定期评估bilge-diagonal offset ratio可以帮助识别潜在风险，防止在海上导致严重问题。总之，bilge-diagonal offset ratio是海洋工程中的一个基本概念，在确保船只安全和高效运行方面发挥着至关重要的作用。通过理解和应用这一比率，船舶设计师和海洋工程师可以设计出不仅符合监管要求而且在各种条件下可靠运行的船舶。随着海事行业的不断发展，像bilge-diagonal offset ratio这样的精确测量的重要性只会增加，这突显了该领域持续研究和创新的必要性。