ball joint

简明释义

球接头

英英释义

例句

1.The ball joint connects the control arm to the steering knuckle.

球接头将控制臂连接到转向节。

2.When performing a suspension check, always inspect the ball joint for any signs of wear.

在进行悬挂检查时，务必检查球接头是否有磨损迹象。

3.The mechanic replaced the worn out ball joint to improve the car's handling.

机械师更换了磨损的球接头以改善汽车的操控性。

4.If you hear a knocking sound when turning, it might be a sign that your ball joint is failing.

如果你在转弯时听到敲击声，那可能是你的球接头出现故障的迹象。

5.A damaged ball joint can lead to uneven tire wear.

损坏的球接头可能导致轮胎不均匀磨损。

作文

The mechanics of a vehicle are intricate and fascinating, especially when we consider the various components that work together to ensure smooth operation. One of the critical parts of a vehicle's suspension system is the ball joint, which plays a vital role in connecting the steering knuckles to the control arms. This connection allows for a range of motion, enabling the wheels to pivot and absorb shocks from the road. Without a properly functioning ball joint (球关节), a vehicle would struggle to maintain stability and control, particularly during turns or on uneven surfaces.The ball joint (球关节) consists of a spherical bearing housed within a socket, allowing for both vertical and horizontal movement. This design is essential because it accommodates the dynamic forces acting on the vehicle as it navigates through different terrains. Over time, however, wear and tear can lead to deterioration of the ball joint (球关节), causing issues such as excessive play in the steering system, uneven tire wear, and compromised handling.Regular maintenance is crucial for ensuring the longevity of the ball joint (球关节). Mechanics recommend periodic inspections to check for signs of damage or wear, such as cracks in the rubber boot that protects the joint from dirt and debris. If a ball joint (球关节) is found to be faulty, it is imperative to replace it promptly to avoid further complications.In addition to mechanical aspects, the importance of the ball joint (球关节) extends to safety considerations. A failing ball joint (球关节) can lead to catastrophic failures, resulting in loss of control of the vehicle. This is particularly concerning for drivers who may not be aware of the symptoms of a failing joint, such as clunking noises when turning or a noticeable looseness in the steering wheel.The design and function of the ball joint (球关节) have also evolved over the years. Modern vehicles often utilize sealed units that require less maintenance compared to older models. These advancements reflect the ongoing efforts in automotive engineering to enhance performance and safety. However, regardless of the type, understanding the role of the ball joint (球关节) is essential for anyone who owns or operates a vehicle.In conclusion, the ball joint (球关节) is a crucial component of a vehicle's suspension system, facilitating movement and contributing to overall safety and performance. Regular inspections and maintenance of the ball joint (球关节) can prevent serious issues down the road, ensuring that drivers can navigate their journeys with confidence. As automotive technology continues to advance, the fundamental importance of the ball joint (球关节) remains unchanged, highlighting its significance in the world of mechanics.

车辆的机械系统复杂而迷人，特别是当我们考虑到各种组件如何协同工作以确保平稳操作时。车辆悬挂系统中的一个关键部分是球关节，它在将转向节连接到控制臂方面发挥着重要作用。这种连接允许一定范围的运动，使车轮能够转动并吸收来自道路的冲击。如果没有正常工作的球关节（ball joint），车辆在转弯或在不平坦的表面上行驶时将难以保持稳定和控制。球关节（ball joint）由一个球形轴承组成，安装在一个插座内，允许垂直和水平运动。这种设计至关重要，因为它适应车辆在不同地形上行驶时所承受的动态力量。然而，随着时间的推移，磨损可能导致球关节（ball joint）的退化，造成转向系统中出现过多的间隙、不均匀的轮胎磨损和操控能力的下降。定期维护对于确保球关节（ball joint）的使用寿命至关重要。机械师建议定期检查，以查看是否有损坏或磨损的迹象，例如保护关节免受污垢和碎片侵害的橡胶保护套上的裂缝。如果发现球关节（ball joint）有故障，必须及时更换，以避免进一步的并发症。除了机械方面，球关节（ball joint）的重要性还延伸到安全考虑。故障的球关节（ball joint）可能导致灾难性的故障，从而导致车辆失去控制。这对于可能不知道故障关节症状的驾驶员尤其令人担忧，例如转弯时的咔哒声或方向盘明显松动。球关节（ball joint）的设计和功能也随着岁月的推移而演变。现代车辆通常采用密封单元，与旧型号相比，所需的维护较少。这些进步反映了汽车工程在提升性能和安全性方面的持续努力。然而，无论类型如何，理解球关节（ball joint）的作用对于任何拥有或驾驶车辆的人来说都是必不可少的。总之，球关节（ball joint）是车辆悬挂系统中的关键组件，促进运动并有助于整体安全和性能。定期检查和维护球关节（ball joint）可以防止将来的严重问题，确保驾驶员能够自信地进行旅行。随着汽车技术的不断进步，球关节（ball joint）的基本重要性仍然没有改变，突显了其在机械世界中的重要性。